See what our Experts say about this Optronics Trailer Lights

• Replacement Tail Light Lens for Tracker Trailstar Trailer
  The lights you have on your trailer are # ST37RB and # ST36RB. The replacement lenses are # A39RB for the front lens and # A37RB for the side marker.
  view full answer...
  
• Tail Lights that Plug In Instead of bare Wires for Trailstar Boat Trailer
  We do have the Optronics ST37 series lights that have the connector instead of bare wires. Aero Pro light # ST37RPG has the plug but just for the running lights, brake, and turn signal wires. The ground is separate. The matching right hand side is # ST36RPG. We also have similar lights for Wesbar, # 271595 and # 271594. I have included some links to video reviews of these light style for you.
  view full answer...
• Replacement Light Recommendation For Left Side Of Trailstar Pontoon Trailer
  The replacement light assembly for your Trailstar Pontoon boat for the left side is part # ST37RB. This is a submersible light that features the tail light functions and the license plate light as well. I have attached a drawing that shows the dimensions of the light you can check out.
  view full answer...
  
• Replacement Trailer Light for a 2006 Tracker Boat Trailer with the Optronics ST-36 RH Tail Light
  The light on your Tracker boat trailer is the right hand ST36 series trailer light from Optronics as is the # ST36RB, that you referenced on our website. They are essentially the same light, but Optronics has been known to make slight changes to their lights from time to time. I have attached a diagram of this light showing its dimensions for you to check out. The dimensions should not be much different from your light if at all, but the important dimensions to look at are the 2 inch...
  view full answer...
  
• Need a Replacement for an Optronics ST-36 RH With 3 Wire Connector
  To replace your damaged ST-36 RH, you will need the Optronics Aero Pro Trailer Tail Light - 5 Function - Submersible - Red Lens - Passenger Side # STL0066RBG. This will be a direct replacement and has the exact same plug you currently have.
  view full answer...
  
• Replacement Tail Lights for Tracker Boat Trailer Model # T13PRO175P
  Although we don't have specifics about the specific trailer you have, we absolutely have submersible trailer light replacement lenses that will work for you. From what I can find about similar Tracker boat trailers you may have lights similar to the # ST37RB (drivers) and # ST36RB (passenger) currently, so you can use the # A39RB (front lens) and # A36RB (side lens) as the replacement. If you can send in a photo of the lights and their measurements we can absolutely confirm these will...
  view full answer...
• Replacement Trailer Taillight Lens for SAE STIAP204DOT
  The SAE STIAP2 04 DOT number you provided is a DOT approval number, which states that the lens is compliant with DOT regulations. Because of that, that number isn't typically a good identifier for finding a replacement lens. However, in this case, we previously had a customer send in a photo of this particular lens which we managed to match up to the Optronics part # A39RB which is a replacement for their # ST36RB and # ST37RB taillights or a Wesbar 3571.
  view full answer...
• How to Determine Correct Replacement Trailer Light Lens or Replacement Light
  The "SAE" on a trailer light isn't actually a part number, it stands for Society of Automotive Engineers and just means it has passed certain testing. The only way to determine the correct replacement lens is with the actual part number of the light, though unfortunately those aren't always readily visible. For example, for parts # ST36RB or # ST37RB you would need the Replacement Tail Light Lens for Optronics ST36RB and ST37RB # A39RB. Without knowing the part number of your light, the...
  view full answer...
• Replacing a 4-Way Connector with 7 Wires on a 2007 Tracker Trailstar Boat Trailer
  Since this is on a boat trailer the 2 additional white ground wires are ground for the lights. This is fairly common on aluminum frames and boat trailers in general because aluminum is a poor metal for grounds and lights grounded near the tail lights will get dunked in water. The 2 brown wires are both running light wires which allows you to run one wire per side instead of having to run a jumper wire from one side of the trailer to the other. You can still use a 4-Way with wiring such...
  view full answer...
  
• Replacement Trailer Lights for Boat Trailer With Optronics ST36/37 Series Lights
  It sounds like you want to use the Miro-Flex LED Combination Trailer Tail Light - 8 Function - Submersible - 18 Diodes - Driver Side # STL27RB and Passenger Side # STL26RB as replacements for your current lights. That is perfectly fine, and the wires should match up. These are, however, a little longer and shorter when compared to your current lights. If you would like a direct replacement that matches the size of your current lights you can use the # ST37RB and # ST36RB. If you're looking...
  view full answer...
• Option to Replace Wesbar 271594
  Hi Griffin, From what I could find your Wesbar 271594 measures 7" long and 3-3/4" tall and has mounting holes 2" apart on center; a similar option that will work is the Aero Pro Combination Trailer Tail Light # ST36RB. This is 7-7/8" long x 3-1/4" tall x 2-7/8" thick and also has mounting holes 2" apart on center.
  view full answer...
• 2004 Stratos Pro 285 XL Bass Boat Wesbar Tail lights Replacement
  Thanks for the pictures and the numbers. I have a solution for you but the Wesbar tail lights that are associated with lens kit item W003372-73 were discontinued in 2011. The Aero Pro Combination Trailer Tail Light - Waterproof - 7 Function - Incandescent - Passenger Side item # ST36RB and the Aero Pro Combination Trailer Tail Light - Waterproof - 8 Function - Incandescent - Driver Side item # ST37RB are listed as the replacement lights for your Stratos Pro Trailer.
  view full answer...
  
• Replacement Optronics Rectangle Trailer Light With Plug-In Style Connector
  We do carry rectangular trailer lights that come with the Plug-N-Go connector like the Optronics Right Hand Trailer Light, # ST26RPG, and # ST36RPG. These two lights come with the 2-wire molded connector. If the connector on your trailer has a 3-wire connector, then you may want to look at the Optronics Right Hand Trailer Light, # ST66RPG. I have attached photos showing what the connectors look like. You can also view photos of the trailer lights by following the product links that I have...
  view full answer...
  
• Replacement Tail Light Assembly for SAE AP2 04
  The SAE number you referenced really isn't a reliable way to determine the correct replacement light. From our experience and research, the replacement light you're looking for is Optronics tail light part # ST37RB for the driver's side and # ST36RB for the passenger side. These lights measure 7-7/8" long x 3-1/4" tall x 2-7/8" thick and have the Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker and Side Reflex functions. The only measurement that looks off is going to be the height,...
  view full answer...
  
• Replacement Trailer Taillight Lens with SAE STIAP2 04 DOT DOT Number On It
  The SAE STIAP2 04 DOT number you provided is a DOT approval number, which states that the lens is compliant with DOT regulations. Because of that, that number isn't typically a good identifier for finding a replacement lens. However, in this case, we previously had a customer send in a photo of this particular lens which we managed to match up to the Optronics part # A39RB which is a replacement for their # ST36RB and # ST37RB taillights or a Wesbar 3571. The lamp housing should have...
  view full answer...
  
• Availability of Optronics ST36 Trailer Taillight
  We do have the Optronics Aero Pro trailer taillight you are looking for with the part # ST36RB which is the right hand side.
  view full answer...
• How to Find Light Part Number on Four Winns Boat Trailer
  Trailer makers don't usually keep track of the brand/model of lights used in trailer production and the numbers you took from your light's broken lens are not part numbers, but rather DOT coding. The light's base is likely to have the part number printed on it so you can check there for a brand and/or part reference. Once you find that you can type it into our search box. If you cannot find that information you can still review the replacement light lenses we offer which are shown on the...
  view full answer...
• Replacement Taillights For Trailer With SAE AP2 04 DOT Number
  The SAE number is not a reliable way to find a replacement light for the trailer. From our experience the replacement light is Optronics tail light part # ST36RB for the passenger side or part # ST37RB for the driver's side. These lights measure 7-7/8" long x 3-1/4" tall x 2-7/8" thick and have the Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker and Side Reflex functions. I have attached a diagram of the mounting dimensions so you can compare your lights. I do recommend to make...
  view full answer...
  
• Replacement Outer Lens for # ST36RB or # ST37RB
  The Replacement Side Marker Lens # A37RB is the replacement outer lens for both the LH and RH tail light. It is the same part, you just rotate it for the side you desire. This will work with both the ST37RB and # ST36RB.
  view full answer...
• Replacement Passenger Side Boat Trailer Taillight Assembly
  Given the photos you've provided, it looks like the replacement lamp you're needing is part # ST66RPG for the passenger side for an incandescent lamp or # STL36RPG for an LED version. The LED version has a 2 pin plug with a separate ground connection that would ground to the trailer frame, or you could cut the connector off your existing lamp and swap them.
  view full answer...
  
• Replacement Tail Light for a Optronics ST-37 LH
  The direct replacement for your Optronics ST-37 LH is the Aero Pro Combination Trailer Tail Light Driver's Side item # ST37RB and passenger side item # ST36RB. These do not have a molded triangle shaped plug so yours must have had that adapter added. It would be easy to swap the connector out when you replace your lights. You'll want to use the Deka Heat Shrink Butt Connector item # DW05744-5. If you're interested in upgrading to the LED equivalent then the correct replacements would...
  view full answer...
• Solution for Replacement Wesbar Tail Lights on Trailer
  Hi Ray; the Wesbar lights you're referencing have been discontinued and the same is true for the replacement lens. For replacement lights with a similar style and dimensions we have the Aero Pro Combination Trailer Tail Light # ST37RB and # ST36RB. These measure 7-7/8" long x 3-1/4" tall x 2-7/8" thick. If you would like LED lights we also have the ONE LED Trailer Tail Light # STL0067RPG and # STL0067RPG. These lights measure 7-3/4" long x 3-1/8" tall x 2-7/8" deep.
  view full answer...
• Replacement Taillight for 2006 Trailster Trailer
  Thanks for the picture of your taillights, from that I can tell that the lights you have are the part # ST37RB for the driver side and the part # ST36RB for the passenger side.
  view full answer...
  
• Matching Light Assembly to Go With Part # ST37RB
  The part # ST37RB that you have is designed to be used on the driver side of a trailer, or left side, of the trailer. If you wanted the matching assembly to go on the other side of the trailer you would want the part # ST36RB as well. Realistically either light could go on either side of the trailer.
  view full answer...

Do you have a question about this Trailer Light?