Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # C12288
Retail:$463.95
Our Price: $276.10
You Save: $187.85
Confirmed to Fit
2002 Mazda MPV Van
with Ground Effects
without Ground Effects
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (7)
- Q & A (0)
- Photos
2002 Mazda MPV Van - Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Class II
- 1-1/4 Inch Hitch
- 3500
- Visible Cross Tube
- CURT
- 350
- Custom Fit Hitch
Perfect for light-duty towing, this custom, Mazda MPV Van trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
12288 Curt Class 2 Trailer Hitch Receiver
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
No drilling required for installation , Exhaust must be temporarily lowered for installation
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Alternate product found
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12288
Average Customer Rating: 3.9 out of 5 stars (7 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Scott10/06/2023
2006 MazdaMPV Van
great job ... got hear in record time.originally ordered from NAPA but was told after 2weeks it wouldn't be in till mid Nov. got my money back and ordered from etrailer and ordered on a Monday night and was on my doorstep Friday morning. great service . don't change a thing.
by: Marc06/14/2020
Hi, the towbar did arrive in time, properly packed.
Instruction is clear. I did run into two issues which took me some time to resolve.
Issue 1 : the two bolts for the weld-on nuts did not fit. They were too large for the nut but also for the two supplied washers. I had to buy two slightly smaller bolts to make it work.
Issue 2: the position of the holes for the weld-on nuts didn’t align with the position of the weld-on nuts. I almost decided to return the towbar, but finally decided to try to use force to get it in place after installing the towbar using the other four
bolts. Was concerned to damage the fuel tank. It finally worked after a lot of pushing, but had luck).
Final result is very good, solid as a rock and I am satisfied, but again, I almost decided to return the towbar.
by: Donald 09/03/2022
Overall, I’m very pleased with my Curt Trailer Hitch Receiver I purchased online through etrailer. I appreciated the ability to track the shipping progress after my purchase. Shipping was faster than I expected. The packaging was sufficient and was in good shape upon arrival. The quality of the hitch is solid with an excellent paint coating. All the parts needed for installation were in the packaging along with clear instructions.
The only reason I didn’t give the hitch a 5 star rating is because the installation didn’t go as smoothly as I had hoped. A hole for one of the threaded bolts was about 1/16” to 1/8” off center. I was able to eventually get the bolt in after fighting it for a while, but it wasn’t easy. I expect the holes lined up perfectly on the manufacturing detail drawing when being fabricated, but the hitch may have twisted a tad bit during the welding process. Working in design and shop planning for a sheet metal shop for close to forty years I know how easily that can happen.
Even with the challenge I had during the installation process, I highly recommend the Curt Trailer Receiver for anyone looking for a solid trailer hitch. I don’t think that you will find a better value for your money and my experience purchasing it through etrailer could not have been better.
by: John 01/23/2023
We used this on our mini van and it helped us pull a utility trailer that we used when moving. It has held up great! 1 year old, no complaints!
by: Stanley 08/10/2018
Precisely engineered for perfect alignment and installation. Very satisfied! Light duty vehicle will now be able to tow small boats and utility trailers as situation arises.
by: Zsolt09/28/2022
by: Coleen07/21/2023
2022 Ford Bronco
7
7
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Receiver for 2003 Mazda MPV Van & How to Tell if it Has Ground EffectsIt is a bit confusing since there isn't any detailed info from Curt that explains it, but I can help you out. Ground effects for your 2003 Mazda MPV van are an additional trim package, and if you take a look at the accompanying photo, you can see an MPV with that trim package. You can compare your bumper to the one in the photo, or you can call a local Mazda dealer with your VIN and they will be able to tell you what is on your van. There is a hitch option for your 2003 Mazda MPV if you...
view full answer...
- 2 inch Hitch Recommendation for a 2005 Mazda MPVThe two different MPV's you mentioned are of different generations so the hitch fits between the two aren't the same. For your 2005 you would want the part # C12288 which is a confirmed fit. This is a 1-1/4" hitch, and the only one available. There are no 2" hitches avalable. For trailer wiring you would then want the part # 56010.
view full answer... - Compatibility of Trailer Hitches with 2001 Mazda MPV VanWe can help you find a suitable hitch for your 2001 Mazda MPV. For your 2001 Mazda MPV we do offer two sizes and classes of trailer hitch receiver, both a 1-1/4-inch Class II type and a higher-capacity 2-inch Class III. Correct fits for these will depend on whether your MPV has the ground effects package. The linked page will allow you to select your vehicle style from the drop-down menu to then see hitches that are compatible. The 1-1/4-inch hitch # C12288 from Curt, works with or without...
view full answer... - Trailer Hitch Recommendation for a 2005 Mazda MPV VanFor your 2005 MPV Van, we have the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12288 My recommendation for a cargo carrier is the Curt Cargo Carrier part # C18145.
view full answer...
- How to Determine if a 2000 Mazda MPV Van has Ground EffectsFrom what I could find it appears that models that do have the ground effects will have a trim piece at the bottom of the rear bumper that also wraps around to the sides of the vehicle. I included a picture with an arrow pointing to the area in question next to a van that does not have that trim piece. However, I do recommend contacting a Mazda dealer and have them run the VIN number and they can tell you what options came with the van. The hitch # C12288 will work on you MPV Van whether...
view full answer...
- What Kind of Suspension Enhancement will Fit My 2002 Mazda MPV Van?We do have a suspension enhancement system that works for your 2002 Mazda MPV, but Air Lift # AL60759 does not fit. Currently the only suspension enhancement we sell for your application is the Timbren jounce spring # TMRMPV. This jounce spring only works with the 2wd van. The Timbren system is easy to install and is maintenance free. A Timbren jounce spring is a good idea because you don't need to add air before towing and there aren't any leaks to worry about. Air helper springs are good...
view full answer... - Concerns About Using Older Vehicle for Towing Rental Trailer Over MountainsIn my research, I saw several reports stating that if the vehicle has the tow package, which consists of a transmission cooler and heavy duty radiator, it can tow up to 3000 lbs. Without the tow package, you'll be limited to 2000 lbs. I would urge you to confirm this for yourself. Your Mazda dealer might be able to clarify for you. Given the fact that the vehicle has over 100,000 miles and given that your trip to California will almost certainly involve driving up and down mountains, I'd...
view full answer... - Can Rear Hatch or Trunk Be Opened with a Trunk Mount Bike Rack Installed on 2003 Mazda MPVYou are right, with a trunk mount bike rack installed, bikes or no bikes, you cannot open the rear hatch or trunk on any vehicle including your 2003 Mazda MPV. There are a few reasons why. First, the opening between the trunk/hatch and the body of the vehicle will change shape. It can get smaller which will cause the bike rack hooks to bend the metal on the trunk lid. I have seen this happen. The hinges are not meant to support the additional weight of the rack so if you could open it...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
10/7/2022
I hate to see the hitch rated at 1 star. What can I do to help?