Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Ask the Experts about this Draw-Tite Trailer Hitch

• Could Draw Tite Hitch # 75691 Fit 2010 Ford F-150 with Dual Exhaust
  You'll have to compare the exhaust setup you installed on your 2010 Ford F-150 to the picture I attached to see if your aftermarket exhaust will fit with the Draw Tite # 75691. Our hitches like this have only be tested on vehicles that have factory exhaust so we don't can't say for certain if they will fit with aftermarket setups. Since this hitch is a bit narrower than most I could see it fitting though.
  view full answer...
• What Does Weight Distribution Mean when Selecting a Trailer Hitch for a 2011 Ford F-150
  Trailer hitches are rated in two ways. The most common rating is weight carrying. This rating is for towing a trailer with a standard ball mount that transfers all of the trailer tongue weight to the towing vehicle. The second rating is weight distribution. A weight distribution system is used to reduce sag at the back of the vehicle when a trailer is attached and to transfer the tongue weight of the trailer to the vehicle and trailer axles, making the hitch capable of higher trailer...
  view full answer...
• Will the Draw-Tite Hitch For a 2011 Ford F150 Have a Factory Appearance
  The majority of this Draw-Tite Max-Frame Trailer Hitch Receiver # 75691 will be hidden behind the rear bumper of your 2011 F-150. It will have the same basic appearance that the factory hitch for this vehicle would have. The hitch opening will be visible, but most of the rest of the hitch will be hidden. Installation instructions are attached. You may be interested in the following products to complete your towing setup: etrailer Ball Mounts # EBMK4 Draw-Tite Wiring # 18252 (installation...
  view full answer...
• Sway Control and Trailer Hitch Recommendation for a 2013 Subaru Outback Wagon
  For your 2013 Subaru Outback the Draw-Tite part # 75673 would be a great option for you as it has a 2 inch opening and Class III capacities. None of the hitches we offer for your vehicle are rated for use with a weight distribution system. Usually this has more to do with the vehicle than the hitch itself. Since the hitch manufacturers specifically say not to use a WD system I can't recommend one for you. Instead you could use a friction sway control unit like the part # 83660 to help...
  view full answer...
• Will a Draw-Tite Trailer Hitch Fit a 2010 Ford F-150 STX with Factory Trailer Wiring Harness
  If your 2010 Ford F-150 came with a trailer wiring harness from the factory, then the Draw-Tite Trailer Hitch, # 75691, will fit because the design of the truck was taken into account when the hitch was made. If the wiring harness was added as an after market part, depending on where it is located it may or may not interfere with hitch installation. I have included a link to the installation instructions for the hitch so you can see where it installs. If your truck came with a factory...
  view full answer...
• Is an Aerolite Trailer with a 900-lb Tongue Weight too Heavy for a 2013 Ford F-150 When Using WD
  To confirm whether it is safe for you to pull your Aerolite with your 2013 Ford F-150 you can simply look at the weight rating on the trailer hitch itself. If you cannot find it then you can contact the manufacturer to see what it is rated. Some trailer hitches have a weight rating that is increased significantly when a Weight Distribution (WD) system is involved in the towing setup. For example, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75691, which is confirmed to fit your F-150,...
  view full answer...
• What Is The Best Hitch For A 2010 Ford F-150 XL 4x2 Pulling A Car Trailer?
  I agree with you on the aesthetics aspect with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75691 for your 2010 Ford F-150. Keep in mind the Draw-Tite class III hitch has a 600 lb max tongue weight and a 6000 lb gross tow capacity unless used with weight distribution then the gross towing capacity goes up to 12000 lbs but the tongue weight stays the same. With the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" Item # C14002 you have a...
  view full answer...
• Trailer Hitch and Wiring Recommendations for a 2012 Ford F-150
  Draw-Tite trailer hitch # 75691 and the discontinued Hidden Hitch trailer hitch, 87583 are basically the same hitch from the same parent company. They even share the same instructions which I have linked for you. Either would be a good choice as the cross tube of the hitch would be mostly concealed behind the rear bumper on your 2012 Ford F-150 like in the video I have linked for you. I also recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball...
  view full answer...
• How to Determine Max Trailer Weight for Towing with a 2014 Ford F-150
  Sometimes the charts in the owner's manuals are confusing and do more harm than good. The best way to calculate the max trailer weight that your 2014 Ford F-150 can handle is by taking the gross combined weight rating (GCWR) found on your door and then subtract the vehicle curb weight along with any additional weight such as aftermarket hitches, people, luggage, and payload. The result will be the max amount of weight that you can tow with your F-150.
  view full answer...
• What Model Years of the F-150 Does the Draw-Tite Max-Frame Trailer Hitch Receiver Part # 75691 Fit
  The product that you asked this question from is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75691. This hitch fits a 2009 - 2014 Ford F-150 without factory hitch and a 2010 - 2014 Ford F-150 Raptor without factory hitch. I have attached a list of all of the trailer hitch receivers we have confirmed to fit a 2012 Ford F-150 for you as well.
  view full answer...
• Recommended Trailer Hitch for 2010 Ford F-150
  The trailer hitch that I recommend for your 2010 Ford F-150 would be the Draw-Tite # 75691. This durable custom fit Class III hitch has an easy, bolt-on installation so no welding is required. A complete hardware kit and installation instructions are included. If you plan to do some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, a hitch pin with clip, and a carrying bag. For trailer wiring, use Draw Tite wiring harness #...
  view full answer...
• Is Draw-Tite Class III Hitch 75691 Concealed Behind Rear Bumper When Installed on 2010 Ford F-150
  When installed on a 2010 Ford F150, the Draw-Tite # 75691 would be partically concealed behind the bumper. The receiver tube is the main portion that'll be visible, along with the lower portion of the hitch crossbar. The linked installation video will give you a good idea of what the hitch looks like once it's installed.
  view full answer...
• What is the Best Class III Hitch for the 2011 Ford F-150
  Without a doubt, for the 2011 Ford F-150, I would recommend the Draw-Tite Class III Max-Frame Trailer Hitch, # 75691, over the other hitches designed for this truck. For less than 20 dollars more than the competitors hitches, the # 75691 hitch has more towing capacity if used with weight distribution, has a curved cross tube for a better appearance under the rear bumper, and has a tab welded to the cross tube to accept brackets for trailer wiring harnesses. All of the hitches designed...
  view full answer...
• Recommended Towing Components For 2013 Ford F-150 For 2009 StarCraft Popup Camper
  I don't believe that the 2009 StarCraft Popup Campers needed to have trailer brakes, so for your 2013 Ford F-150 you will need a trailer hitch, 4-way wiring connector, and ball mount. Without knowing what you already have, I'll give you recommendations for each. For a trailer hitch receiver, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75691. This is an easy bolt on installation that will give you a 2 inch receiver opening. For a wiring...
  view full answer...
• Is Drilling Required to Install a Trailer Hitch on a 2009 Ford F-150
  Your 2009 Ford F-150 does have holes in the frame to install a trailer hitch without having to drill into the truck frame. In some cases holes may have to be enlarged using a file or drill but new holes won't have to be drilled. Draw-Tite Class III Max Frame Receiver Hitch - 2009 Ford F-150 # 75691 is a popular option for your truck. I linked a video showing an example installation for you. I also recommend etrailer.com 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs Item # EBMK4....
  view full answer...
• Will Draw-Tite Trailer Hitch # 75691 Fit a 2010 Ford F-150 With Factory Full Size Spare Tire
  The Draw-Tite Trailer Hitch, # 75691, will fit all models of the 2010 Ford F-150 and there are no restrictions regarding the factory spare tire. I have included a link to the installation details for reference. The recommended ball mount for this hitch is # 2753. You can use ball # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63847 (2-5/16 inch diameter). For trailer wiring, if your truck did not come with a factory 4-Way or 7-Way, you can use 4-Pole Hardwire Kit Including...
  view full answer...
• Draw-Tite 75691 Max-Frame Receiver Compatibility with 5, 200 lb Dry Weight Trailer
  The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75691 on your 2010 Ford F-150 does not need to be replaced. The hitch is rated for 6,000 lbs and 600 lb tongue weight without weight distribution and up to 12,000 lbs towing and 1200 lbs tongue weight when used with weight distribution. The hitch will work well for you and you will only be limited by your truck's towing capacity as your hitch will carry more than the max amount your trailer can tow so you definitely...
  view full answer...
• Will the Spare Tire Interfere with Trailer Hitch Installation on a 2011 Ford F-150 Crew Cab 4x4
  Provided the spare tire is a factory size and not an aftermarket larger size then the Draw-Tite # 75691 would not interfere with the spare tire. I have included a link to the install instructions and an install video for you. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip, and a carrying bag. If the truck is not equipped with a trailer wiring harness, you can add one using # 18252.
  view full answer...
• Torklift TLF1005H Hitch Fit on 2012 Ford F-150 Short Bed Pickup
  TorkLift SuperHitch Hero Dual-Receiver Trailer Hitch # TLF1005H is a confirmed fit for the 2012 Ford F-150 short-bed with a factory-installed hitch that has a 10,500-lb rating. Versions with the higher-rated 11,500-lb factory hitch are NOT compatible. The factory hitch serves as the mounting point as shown in the linked instructions. Is your hitch factory or aftermarket? If it is an aftermarket hitch like Draw-Tite # 75691 then you could unbolt it and then install a higher-rated aftermarket...
  view full answer...
• Would Trailer Hitch from 2003 Ford F-150 Fit 2011 Ford F-150
  A trailer hitch from a 2003 Ford F-150 would not fit a 2011 F-150 due to generation changes so you'd need to go with a hitch like the Draw Tite part # 75691 which we had the chance to install on a 2011 F-150 just like yours.
  view full answer...
• Parts Needed for 2014 Ford F-150 to Tow Trailer with Electric Brakes
  We have everything needed to equip your 2014 Ford F-150 so that it can tow your utility trailer and power its electric brakes. The exact parts you need will depend a bit on what is already installed on your truck. Starting at the rear bumper, if you just have a 4-Way connector (and not a 7-Way round connector), I recommend using the Universal Installation Kit # ETBC7 to install a fully functional 7-Way. This kit also includes the additional wiring needed to install a trailer brake controller....
  view full answer...
• How Will Available Curt Hitches for 2010 Ford F150 Install in Relation to the Rear Bumper
  Curt actually offers three different hitches for a 2010 F150 (see link). Part # 13368 is a Class III with a square tube crossbar and # 13371 is a Class III with a round tube crossbar. Both hitches have a 600 lb tongue weight, 6000 lb towing capacity. A class IV, part # C14002 with a 1000 lb tongue weight 10000 lb towing capacity is also available. You can see the installation instructions for all three hitches by clicking on the provided links. As you can see by the instructions,...
  view full answer...
• Hitch Receiver & 5th Wheel Towing Capacities for 2012 Ford F-150 Super Cab
  The best place to confirm your truck's towing capacity is in your owner's manual. The base 2012 F-150 is rated for a 5000-lb towing capacity unless equipped with the heavy-duty trailer towing package. Higher towing ratings may apply depending on whether you have 2WD or 4WD and depending on your truck's wheelbase. I suggest you check pages 272 and 273 of your owner's manual to find your exact towing capacity based on your specific truck's mix of equipment. Please see the linked image taken...
  view full answer...
• Can Trailer Hitches for 2009 Ford F-150 Be Used with Weight Distribution to Tow More than 6,000 lbs.
  All of the hitches available for the 2009 Ford F-150 are rated for 6,000 pounds gross trailer weight and 600 pounds tongue weight capacity. However, all of the available hitches (see link) are rated for use with weight distribution which will allow the hitch to tow 10,000 pounds (# 13368) to 12,000 pounds (# 75691) depending on the hitch. These are ratings for the hitch, but not the truck. You will need to check the owners manual to determine if a weight distribution system can be used...
  view full answer...
• Does Use of Weight Distribution System Increase Trailer Towing Capacity
  Some trailer hitches will have higher tongue weight (TW) and towing capacities when used with a weight distribution/sway control (WD/SC) system like the Pro Series # 49570. As an example, the Draw-Tite Class III hitch # 75691 we offer for your truck is rated for 600-lbs of TW and 6K trailer weight without a WD/SC system, but those ratings double to 1200-lbs and 12,000-lbs when a system is used. Your hitch's safety/warning sticker will indicate if it has a higher rating with WD/SC. You will...
  view full answer...
• Parts Needed to Tow Safely with a 2010 Ford F-150
  First let's start with a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. To install this controller in your 2010 Ford F-150 will only require the install harness part # 22292...
  view full answer...
• Will Thule DoubleTrack Bike Rack Fit 2011 Ford F-150
  As long as your 2011 Ford F-150 has a factory hitch or an aftermarket hitch like the Draw Tite part # 75691 the Thule DoubleTrack part # TH9054 will fit and work well. I attached a review video for this bike rack that shows it being used on a similar 2013 F-150 as yours as well.
  view full answer...

Do you have a question about this Trailer Hitch?