Spring Release Latch and Keeper - 4 Holes - 1/4" - Passivated Stainless Steel - Right

Video Transcript for Review of Paneloc Trailer Door Latch - Right Stainless Steel Spring Release Latch Keeper - PA29VR

Hi everybody. Andy here with etrailer.com. Let's take a real quick look at this right stainless steel spring release latch and keeper. Now this combination hinge and latch with a keeper is gonna be perfect for storage cabinets and trailer compartments. It is designed to stay open when you pull the pin back and the latch has a right-hand configuration. So lemme move this block out of the way here.

So I just wanted to give you a view of this so you can see it's spring loaded, and then it has a hold back just like that so it's gonna keep that open, and then (hinge clicks) it'll snap right back when you take it out of that hold back. You're going to get a total of four mounting holes, as you can see here. If I move my finger there, you can see it. It's corrosion resistant, passivated stainless steel, so it's gonna hold up really well for you. So looking at some dimensions here, the bracket itself is gonna be 1 3/4" long, 1" wide, and then the distance between the mounting holes on each of the brackets here is going 1 1/4" on center.

And then the latch pin dimensions, it's gonna be 2 1/4" long and it's a 1/4" in diameter. And then the pin extension right here is about half an inch. Well, I think that's going to wrap up our real quick look today. I do hope that our brief time together was helpful for you. Again, my name is Andy.

Thank you for joining me.