Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
Item # RM-154
Retail:$141.28
Our Price: $89.39
You Save: 37%
Confirmed to Fit
2018 Ford Taurus
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (773)
- Q & A (0)
- Photos
2018 Ford Taurus - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. Includes installation hardware.
Features:
- Carries your RV's tail, brake, and turn signals to your towed car
- Prevents feedback that can damage your vehicle's electrical components with diodes
- Includes:
- 4 Hy-Power diodes
- (2) 4-Wire harnesses with 4-pole flat connectors
- Butt connectors, 1 ring terminal, zip ties, and plastic loom
Specs:
- Max amperage: 85 amps
- Max voltage: 24 volts
- Power cord: 6' long
- 4-Wire harness: 30' long
- Plastic loom: 3' long
Notes:
"Don't be intimidated by diodes: if you can strip and crimp wire, this installation will be no problem."
Combined Lighting System vs Separate Lighting System
A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning. (In other words, the car signals a turn by flashing the brake light.)
A separate lighting system, or 3-wire system, has the brake signal and the turn signal light up independently of each other. Typically, the turn signal is amber.
To keep the separate lighting system on your car functioning properly while you're flat towing, add a wiring converter (118158 - sold separately) and 2 additional diodes.
Do I Need a Brake Light Relay?
If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit. Without a relay, your car's brake signal will override the turn signal sent by the RV when you are slowing down to make a turn, creating a potentially dangerous situation. Other drivers will see that you're slowing down, but not that you're making a turn. With a brake light relay, you can signal both and travel safely.
Wiring Diagrams for Roadmaster Diode Kit
154 Road Master Universal Wiring Kit with 4 Hy-Power Diodes and 4 Wire Flat Trailer Connectors
Compare to Tow Ready TR118821
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors - RM-154
Average Customer Rating: 4.8 out of 5 stars (771 Customer Reviews)
This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. Includes installation hardware.by: Benjamin 05/09/2024
Simple to install kit that does exactly as listed. Very thorough instruction that were easy to follow.
by: Wes 02/10/2024
It does what it says on the tin. Easily lit up my XJ so I could tow it. Only regret is that by making the connections at the rear, you don’t get the front market lights on the toad. I should have connected the running lights diode in the harness under the dash so all the marker lights come on at night.
by: Larry02/10/2024
I’m always extremely satisfied with Roadmaster products. I had just bought a new truck and planned on towing it so I needed everything to get it ready to tow. This review also applies to to the other items I purchased.
by: Gregory H04/19/2024
First of all Justin B,was awesome so very helpful and knowledgeable went over everything with me and then double checked what was needed before I placed the order for my 2022 maverick to be flat towed, order only took 3days to get to Fl.Kudos to Justin B all the guys putting together the order
and etrailer awesome job,will definitely use them again for any of my needs.
by: Billy02/08/2024
I thought I order the 7 to 6 pin wiring harness for my vehicle as I have the 7/6 cord I used when I pulled my pickup. I also ordered the 6 pin mounting bracket with the 6 pin adapter that wires into the harness. I received the kit which is a flat 4 pin harness.
by: Gerald12/29/2023
2015 Subaru Forester
etrailer is a great company for towing products. They have fast delivery and they have nice installation videos. This order I added 2 more diodes to wire my 2015 Subaru Forester to have separate wiring for break, running, and turn signal lights.
by: Chuck B04/15/2024
Works perfectly and straightforward instructions made it easy to install.
by: Luis02/28/2024
This system worked perfectly from experience. They help from trailers e trailer agents was crucial for guiding me through the process.
by: David04/18/2024
2014 Chevrolet Equinox
It is exactly as advertised, not yet installed but looks pretty self explanatory
by: Howard 03/09/2024
THE EQUIPMENT IS FINE. THE INSTALLATION VIDEOS ARE SUPERB. MAKING PURCHASING THIS PRODUCT VERY WORTHWHILE.
by: Penny02/14/2024
I have order several things from etrailer. Their products are great. Due to nobody's fault but my own I ordered some wrong things. The return was so easy, no questions asked. I would recommend this company to anybody.
by: Dennis01/27/2024
2017 Jeep Grand Cherokee
I’ve used several of these and they always work great.
etrailer videos are a great help!
by: Kenneth 12/07/2022
Items arrived right on schedule and in good order. I ordered three items in the last few weeks. Their CHAT agents were extremely helpful in answering all my questions about compatibility with my vehicle.
by: Randy 05/14/2024
My parts arrived intact and in a timely manner. I am very pleased with my purchase.
by: Gerald11/12/2023
Great tow plate , easy to install
by: Steve03/13/2022
Installation instructions were great, no issues or questions. I ran the wire thru the frame, and used split wire loom and tape to protect wiring when outside the tube frame.
by: Robert06/02/2024
Good instructions and easy to install.
by: Keith 04/05/2024
Fits and works just as it should.
by: Richard07/25/2022
2019 Chevrolet Blazer
Product is very well built and is hidden within the bumper/grille. Installation wasn't too difficult, reinstallation of front bumper requires 2 people.
Pleased with end results.
by: Dean 05/17/2023
The install was more challenging than the tow bar itself but we got it done. Be patient with the tail light diodes they are tricky to fit but not impossible. I ended up using some 3m double sided adhesive sticky’s to hold the diodes in place while i pushed the tail light assembly back into position.
by: Billy 06/03/2023
2015 Jeep Wrangler
Lori was spot on in making sure I got the correct base plate assembly and light package for my 2015 Jeep Wrangler Sport. Deliver was within the projected timeframe and installation when as per detailed instructions . Good job Team ETrailer, that is why I keep coming back
by: Doug 08/11/2023
Toyota Land Cruiser
I used this on a 1988 Toyota Land Cruiser, so I could flat tow it behind an Motorhome. Easy to install!
by: Darrin03/03/2024
Easy install
by: Donald05/26/2023
We tow a 2022 Ford Escape behind our Winnebago motorhome. This wiring kit did the job for us. Everything working great!
by: Steven 08/21/2023
Jeep
Straightforward install on my Jeep Gladiator and no issues.
25
772
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Parts Needed to Flat Tow 2016 Ford Expedition 4x4 Behind 2013 Monaco Knight 40DFT MotorhomeWe can help you with base plates and the other components needed for safe and legal flat towing of your 2016 Ford Expedition 4x4 behind your Monaco motorhome. I can suggest as a good starting point for your planning process a review of the linked articles on the basics of flat towing, braking systems and hitch adapters. The items required to flat tow your Ford include a tow bar, safety cables, a wiring/lighting kit of one kind or another, a high/low hitch adapter and both base plates and...
view full answer... - What Base Plates and Wiring are Needed for Towing a 1993 Subaru ImprezaYes, the RoadMaster XL kit, part # 909-1, will fit your 1993 Subaru Impreza. There are two methods for setting up lights on a towed vehicle. You can use temporary kits, usually magnetic, that will add a light fixture to the car. These kits are favored by those that do not want to do the wiring otherwise involved. Custer Magnetic Tow Light Kit, part # RM-2120 is our best selling magnetic kit. I have added a link to all of them below. If you would prefer to hard-wire the Impreza, you would...
view full answer... - Wiring Recommendation for Flat Towing a 2014 Ford FlexThat is an excellent question. There are multiple options of wiring available for flat towing any vehicle and it can be really overwhelming when doing research. A lot of it stems from wiring kits being fairly universal so when a manufacturer comes out with a fit then it can technically be installed on multiple vehicles. For your 2014 Ford Flex I recommend using the Roadmaster Flexo-Coil Wiring Kit # RM-15267 because it has the 7-Way that plugs into your motorhome but then it also has...
view full answer... - Flat Tow Set Up For 2001 Jeep WranglerI can show you what you need for sure. First you will need the the Blue Ox Base Plate Kit - Fixed Arms # BX1120. Second you will need the Blue Ox Ascent Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 7,500 lbs # BX4370. Third you will need to make sure your lighting system is synced up to the tow vehicle. I recommend the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. You will also need a braking system. I prefer the Brake Buddy Select 3 Portable Supplemental Braking System...
view full answer... - Parts Needed To Flat-Tow a 2018 GMC Sierra 1500In order to flat-tow a 2018 GMC Sierra 1500 you'll need a base plate kit, safety cables, tow bar, braking system, wiring harness, possibly a few other smaller items. I have attached a full list of all parts below for a complete setup. Roadmaster Direct-Connect Base Plate Kit part # RM-3177-3 Roadmaster Nighthawk All Terrain Tow Bar part # RM-676 Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 Roadmaster...
view full answer... - Recommended Fat Bike Rack And Flat Tow Setup For A 2012 Jeep Wrangler UnlimitedBetween the Saris MHS Bike Rack for 2 Bikes # SAR73MR and the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes # HLY64FR I recommend going with the Hollywood Racks # HLY64FR. Reason being is; Not only does this bike rack have a higher capacity than the Saris, it's also a bit lighter at 58-lbs compared to 60-lbs, and most importantly it is compatible with flat towed vehicles. Additionally, if you're interested in completing your flat tow setup, you're also going to need: -A set...
view full answer... - Is the Mopar Recreational Flat Tow Wiring Kit Needed to Stop Wobble on a 2021 Cherokee?From what I could find out, the Mopar Recreational Flat Tow Wiring Kit will not be needed for a 2020 or 2021 Jeep Cherokee Trailhawk. This was only a requirement on a 2014 to 2018 as the issue this was designed to combat has since been rectified. If you have not completed your flat tow set up as of yet, the following will be some recommendations to get you on the road. One of the huge pluses with having a Jeep is they are one of the most common vehicles to flat tow. With that being said,...
view full answer... - Is Drive Shaft Disconnect Needed to Flat Tow a 1996 Ford RangerI took a look at the online owner's manual for a 1996 Ford Ranger and it looks like the 2WD manual can be flat towed, you just need to release the parking brake and place the transmission gearshift into the neutral position prior to towing. You won't need to disconnect the drive shaft. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. I recommend the following: Crossbar-Style...
view full answer... - Flat Towing A 2019 Buick EnvisionBefore flat towing any vehicle you should always check your owner's manual to ensure your vehicle can be flat (dinghy) towed. After looking through the manual for your 2019 Buick Envision it looks like your vehicle is approved for flat towing and you'll need to: 1. Position the vehicle to tow and then secure it to the towing vehicle. 2. Turn the ignition on, and shift the transmission to N (Neutral). 3. With the transmission in N (Neutral), turn the ignition off. 4. To prevent the battery...
view full answer... - Flat Towing Recommendations For A 2016 GMC Sierra 2500There's a variety of reasons depending on the vehicle but one of the main reasons I've seen across most vehicles is that it could effect the steering wheel lock and you could end up dragging the tires instead of them turning with the RV. I HIGHLY recommend following everything it says in your owner's manual to ensure the safety of you and your vehicle while flat towing. The battery being disconnected will cause it to drain if you hook up the brake controller to it so I recommend the Brake...
view full answer... - What Wiring Harness is needed to tow a 2008 Dodge Ram Behind a MotorhomeThere are not any plug and play type harness available for towing a vehicle behind a motorhome if that is what you are looking for. The part you are looking for is part # RM-154. I have added a link to a video showing this kit being installed on another vehicle so you can get an idea of the process.
view full answer... - Recommended Tow Bar Wiring Kit For A 2017 Lincoln MKZWhen it comes to installing the tow bar wiring on your 2017 Lincoln MKZ The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7 is the correct kit you would need. This kit is for a RV with a 7 round adapter and will make the Lincoln MKZ mirror the turn, stop and tail lights of the motor home. If your motorhome has a 4 flat connector you would need The Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. The # C56258 is used...
view full answer... - Roadmaster Parts Needed to Flat Tow 2020 Chevy Colorado Z71 2WDA complete flat towing setup consists of 5 primary components, Base Plate Kit, Tow Bar, Safety Cables, Indicator Lights/Tow Bar Wiring and a Supplemental Braking System. Some vehicles require multiple components within the wiring for a proper set-up. And. in some situations a high-low adapter may be needed. I have linked a help article below that walks through this process of identifying if needed and how to select the correct size. - Base Plate, Roadmaster Direct-Connect Base Plate...
view full answer... - How to Flat Tow a 2016 Chevy Colorado With 4WDI took a look at the owner's manual of a 2016 Chevy Colorado and a four wheel drive model can be towed so long as it has a N (neutral) and Four-Wheel Drive Low setting. There are a number of parts you're going to need in order to do this, starting with compatible base plates. I recommend the Blue Ox # BLU93FR. For a tow bar I recommend going with the Blue Ox Alpha # BX7380 because of how easy the tow bar is to connect to the base plates, the long arms that make it easier to maneuver when...
view full answer... - Tow Bar Recommendation for a 1999 Pontiac Grand Am AutomaticIf you have a 1999 Pontiac Grand Am SE you will need the Roadmaster XL Base Plate Kit, item # 194-3, You will need a tow bar to go with the XL base plate kit and I would recommend the RoadMaster Falcon 2 Tow Bar, item # RM-520, which will slide into the receiver on your RV. Wiring can be done in several ways, I would recommend the using the RoadMaster Tail Light Wiring Kit with Bulbs, item # RM-155, if there is space in the taillights to mount the extra bulbs. This system uses the vehicle...
view full answer... - Is Brake Light Relay RM-88400 Required For Flat Towing 2016 Jeep Cherokee With Active Drive IIBased on our information, a brake light relay, Item # RM-88400, will be required if your 2016 Jeep Cherokee is wired with a diode light kit like Item # RM-154. I encourage you to consult your 2016 Jeep Cherokee owner's manual for specific information and instructions on flat towing your Jeep. I have attached some articles and videos for you to check out.
view full answer... - What is Needed to Flat Tow a 2007 Pontiac Vibe Behind an RVTo tow your 2007 Pontiac Vibe behind your RV, you will first need to install a base plate kit. For your vehicle, you will need the Roadmaster XL Base Plate Kit, # 3130-1. Base plate kits are vehicle specific and this one is made to fit your Vibe. I have included a video that shows a base plate kit being installed to give you a general idea of what it entails. Next you will attach a tow bar. The RoadMaster Tracker, # RM-020, is designed to be compatible with the XL series of base plates....
view full answer... - Is Brake Light Relay Needed With Supplemental Braking System on 1997 Jeep Wrangler?To start with, I recommend going with the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154 for wiring on your 1997 Jeep Wrangler. This kit includes 4-way flat connectors for your RV and Jeep and will prevent electrical feedback which may cause damage. In terms of the relay, you will need to use the Roadmaster Brake-Lite Relay Kit # RM-88400 with each of the supplemental braking systems we carry unless you use magnetic tow lights such as # TL21RK. We do not carry the Brake Buddy...
view full answer... - Tow Bar Wiring/Lighting Kit Recommendation for a 2014 Ford F-150Roadmaster, the manufacturer of a diode kit that has been confirmed to fit your 2014 Ford F-150 says that their kit part # RM-154 has been confirmed as a fit for your vehicle. However, we have an even easier to install wiring kit that you may also be interested in. The Hopkins Tow Bar wiring kit part # HM56000. This kit plugs in line with your taillight wiring harness and operates the taillights like a diode kit. Its a very easy install, check out the install video I attached that shows...
view full answer... - Recommended Wiring Harness to Dolly Tow 2008 Chrysler Sebring ConvertibleTo wire your 2008 Chrysler Sebring for dolly towing behind a motorhome I recommend installing a tow bar wiring diode kit like the Roadmaster 6-Diode Universal Wiring Kit, # 154-792-118158. I have attached a drawing that details the 6 diode installation for you. You will need a circuit tester like part # PTW2993 to identify the correct wiring circuits to splice into, and you will need to install a 4-Way wiring connector on your motorhome if it is not already equipped with this style of...
view full answer...
- Compatible Blue Ox Base Plate For A 2017 Toyota Corolla iMThe Blue Ox Base Plate Kit # BX3796 is a confirmed fit for a 2017 Toyota Corolla iM. Most base plates end up fitting multiple cars so that's why you see a picture of this one on a Scion. If you have this kit installed and would like to leave a review with a picture of them on your 2017 Toyota Corolla iM we'll add it to the available photos for others to view. The shipping weight of this base plate is 56lbs. To flat tow you'll also need a tow bar, tow bar wiring kit, braking system, and...
view full answer... - Routing the Wires of a Tail Light Isolating Diode System # 38995 From Front to Rear of VehicleI attached an FAQ article to the right that details how a similar wiring install is run from the back of a vehicle to the front for you to check out. But basically you will want to route the wire through frame rails is present or along existing harnesses using zip ties to attach the wire avoiding any pinch points like suspension components or hot areas like exhaust pipes. To get the wire into the interior of the rear of your vehicle you will want to find a grommet in the trunk area, cut...
view full answer... - Parts Needed to Flat Tow a 2007 Jeep Wrangler Unlimited Behind a MotorhomeFor a far superior flat towing set up I actually recommend Roadmaster. The top of the line, cream of the crop, ultimate tow bar that will make you the envy of all your flat towing neighbors is the Nighthawk # RM-676. We're talking non-binding making hookup and disconnect a breeze, LED lights for visibility (and they look cool), safety cables included, umbilical cable with 7-way RV-style plug on 1 end and 6-way plug on other end included, 6-Way socket for the front of the 2007 Jeep Wrangler...
view full answer... - Tow Bar for Flat Tow Mini Cooper 2600 PoundsTo flat tow your 2010 Mini Cooper Convertible S model you will first need Roadmaster # 521877-1 base plates which are hidden well and have easy to use twist-lock mechanisms. Next you will need a compatible tow bar. I strongly recommend a non-binding tow bar because with it you will not need to have the vehicle and motorhome perfectly straight and level to hook up or disconnect. If you ever had to fight with a tow bar because it bound up then you know how much of a pain, literally and figuratively,...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Schuyler H
Video by:
Ethan H
Video by:
Rick G
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Amanda K
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kenneth
12/8/2023
Diodes were not the ones I needed even though the etrailer site said they were. I had to purchase the correct ones from the auto electric shop where I had the wiring done.