bing tracking image
  1. Tonneau Covers
  2. Retrax
  3. Retractable - Manual
  4. Low Profile - Top of Bed Rails
  5. Rack Compatible
  6. Aluminum
RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots

RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots

Item # RTT-80485
Our Price: $2,449.99
You Save: $1,334.87
Tonneau Covers

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 90 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Install crossbars (sold separately) in the slotted rails of this heavy-duty cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo. Great Prices for the best tonneau covers from Retrax. RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots part number RTT-80485 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (51)
  • Q & A (0)
  • Photos

Retrax Tonneau Covers - RTT-80485

  • Retractable - Manual
  • Low Profile - Top of Bed Rails
  • Retrax
  • Rack Compatible
  • Aluminum
  • Matte
  • Opens at Tailgate

Install crossbars (sold separately) in the slotted rails of this heavy-duty cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.


  • Custom-fit tonneau cover protects your cargo and your vehicle's bed from the elements
    • Deters theft and keeps your cargo out of sight
    • Reduces wind drag and improves fuel economy when closed over truck bed
  • Retractable design allows for full truck bed access in seconds
    • Sealed ball-bearing rollers help cover roll smoothly without need for lubrication
    • No joints or hinges to trap dust, wear out, or freeze
  • Locking handle lets you easily open and close the cover, and secure it at any point along the rails
    • Latch it partially open to conceal cargo in the front of your bed while leaving room for oversized loads at the rear
    • Close and lock the cover for maximum security when used in conjunction with your locked tailgate
  • Built-in T-slots let you mount your ladder rack or roof rack crossbars to the side rails
    • Compatible with Thule, Yakima, Rhino Rack, and more
  • Space-saving canister stores retracted cover and shields it from the elements
    • Spiral track system keeps cover from rubbing against itself, preventing wear and tear
    • Angled bottom takes up less space in your bed, leaving more room for cargo
    • 2 Drain tubes included to let out any water that gets inside canister
  • Side rails sit 1" above truck bed for a low-profile look
  • Superior protection for your cargo
    • Weather stripping and foam seals on all sides keep moisture, snow, and dust out of bed
    • Cover overlaps top of tailgate to prevent water from leaking inside
  • 1" Thick, durable aluminum is impact and weather resistant
    • Matte black finish is scratch resistant and won't fade in the sun
  • No-drill installation - rails easily clamp onto your truck bed rails
  • Made in the USA


  • Weight capacity: 500 lbs evenly distributed
  • Canister dimensions: 13-1/2" deep x 12" tall
  • Limited lifetime warranty

The RetraxPRO XR offers the most security and the best protection for the items in your truck bed. This aluminum tonneau cover has a snow load of 500 lbs and can withstand impacts and inclement weather. You can secure this retractable cover at any point along the rails with an easy-to-use, locking handle, all to ensure that your gear stays safe and protected. And accessory T-slots are built into the rails so you can add a ladder rack or roof rack to carry cargo above your bed without interrupting the functioning of the cover.

Smooth, Retractable Operation

Retrax sealed ball-bearing rollers

This tonneau cover retracts quickly and easily for complete truck bed access. It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxPRO XR has no joints or hinges that can wear out, freeze, or trap dirt. It does not need to be lubricated and it has no springs that can fail. Unlike other truck bed covers on the market, you won't have to struggle with pull straps, hook-and-loop fasteners, or snaps every time you open and close the cover.

Retrax pop-up handle

At the end of the cover, on the driver's side, there is a pop-up handle that makes it easy to slide the cover up and down the length of your truck bed with just one hand. The handle must be popped up for the tonneau to move, but you can push or pull the cover to guide it along the rails from either side of your truck.

Retrax spiral track system

When not in use, the cover rolls up into a space-saving storage canister at the bulkhead of your truck, so you'll never have to remove the tonneau to access your cargo. This canister has a unique spiral track system that keeps the cover from coming into contact with itself while it's retracted. This helps prevent wear and tear on the cover while you're opening and closing it.

Retrax canister with drain tube

With the cover fully retracted, the entire canister assembly only takes up a small portion of your truck bed. And the angled bottom of the canister gives you more space to slide long items or small gear underneath it.

Maximum Security and Protection for Your Cargo

Retrax lid covers key

When the RetraxPro XR is closed, potential thieves will find it nearly impossible to access the items in your truck bed. The locking handle is mounted flat and is concealed with a lid, keeping it well hidden from prying eyes. This flat, weather-guarded lid also keeps out dirt and debris to prevent internal corrosion in the keyhole, ensuring that the lock lasts longer and won't seize up.

Retrax lock and pop-up handle

To unlock the cover, lift the lid on the lock, insert and twist the key, and press the button to release the pop-up handle. Once the handle is up, you can slide the cover back.

Latch Retrax cover anywhere on rails

You can latch the cover at any position along the rails by pushing the handle back down. This lock-in-place feature enables you to carry long items that overlap your tailgate while still covering cargo, such as a tackle box, that's stored closer to the bulkhead of the truck.

Retrax cover operates independent of the tailgate

This cover is better at preventing cargo theft than soft covers, which can be cut open with a knife. It also cannot be pried up at the edges like some hard, folding covers. As a result, your cargo and truck bed are secure when this cover is closed and latched, as long as you lock your tailgate as well. Conveniently, the cover operates independent of the tailgate, so you can open and close the tailgate without touching the cover, and you can open and close the cover without disturbing the tailgate.

Retrax weather strip

To keep snow, water, and dust out of your bed, the tonneau cover includes weather stripping and foam seals. An automotive-grade weather strip ensures a firm, dependable seal along the bulkhead of your truck. Attached to the bottom of each side rail is a foam seal that conforms to the shape of your bed rails. These seals help to prevent any scratches on your bed rails as well as fill any gaps to keep your cargo from getting wet or dirty. The cover also overlaps the top of the tailgate for additional protection against intrusive dirt and debris.

Durable, Long-Lasting, and Attractive Cover

Retrax attractive cover

The RetraxPRO XR is constructed of heavy-duty aluminum slats that are 1" thick. They have excellent dent and impact resistance to keep the tonneau from getting damaged by falling debris or by thieves who attempt to break in by force. In addition, this cover can hold up to 500 lbs of snow or evenly distributed weight when it's rolled out. And on top of that, its durable matte black finish is weather and scratch resistant.

Retrax drain tube

To prevent mildew from forming on the cover while it's rolled up, the RetraxPRO XR features a water management system that channels excess water out of the storage canister. Two drain tubes attach to the bottom of the canister to remove any water that gets inside. The tubes then route water through the existing drain holes in the floor of your truck bed, ensuring that the stored cover remains as dry as possible.

Retrax flush design

When rolled out, this tonneau sits nearly flush with the back of the canister to give a streamlined look. In addition to the flush-mounted locking handle, the sleek frame features a top panel that overlaps the bulkhead of the truck and storage canister, eliminating the gap in between.

Retrax extends over 5th wheel

The low-profile side rails mount just 1" above your truck bed, which offers a sleek look while still providing enough clearance for most 5th-wheel hitches to remain installed beneath the cover.

Built-In Slots for Mounting Aftermarket Accessories

Retrax Trax Rail System

Integrated into the side rails of the RetraxPRO XR is a track system that you can use to mount your T-slot-compatible ladder rack or roof rack crossbars (sold separately). This way you can haul your bikes and other gear above your cover to free up your truck bed for additional cargo. This Trax Rail System does not interfere with the functionality of the retractable tonneau at all, so you'll still be able to use the cover while your racks are mounted.

To see if your specific Thule, Yakima, or Rhino Rack T-slot-compatible ladder rack or roof rack will work with this tonneau, please refer to the alternate instructions link at the bottom of this page.

Easy, No-Drill Installation

Retrax installation parts

To install the RetraxPRO XR, begin by attaching the side rails to the canister with the provided screws.

Retrax installation

Because the cover comes preinstalled inside of the canister, it will take 2 people to lift the assembled unit and place it on your truck. Once the cover is in position, make sure that the side rails are square on your truck bed rails. Then secure them in place with the bolt-on clamps. Finally, install the drain tubes in the canister and route them through the factory holes in your truck bed.

T-80485 Retrax RetraxPRO XR Hard Bed Cover w/ Trax Rails - Retractable - Aluminum - Matte

Installation Details RTT-80485 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots - RTT-80485

Average Customer Rating:  4.6 out of 5 stars   (51 Customer Reviews)

Install crossbars (sold separately) in the slotted rails of this heavy-duty cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.


Showed up quickly, this is the 3rd purchase from, they have great customer service, they know their products, prices are reasonable and they ship fast. I also purchased the Curt Hitch from them.


My first impression is that this is one heavy duty and sturdy Tonneau cover. I'll put an emphasis on the word heavy. I have an 8 foot bed on my 2022 Silverado 3500HD and this added significant weight to the top and a bit to the rails. Assembly took two of us and we had one more set of hands to set it in place during installation. My estimate is that the assembled weight is about 120 pounds. No issues with the overall installation, and watching the several online and the Etrailer videos helped. It took us three hours to assemble and install it. However, there was a cracked 2"x2" area on one of the plastic side covers of the box that houses the rolled-up cover. Apparently this cracked / broke during shipping. I fixed this during assembly rather than delay installation. I was a bit surprised that vulnerable and brittle plastic material was used for construction of this component. The box itself is metal. I reinforced it with a 4"x4" metal plate and plastic epoxy to support the mounting bolt at the center of the broken plastic piece. Much stronger than new. A photo was taken of the cracked area that can be supplied to Retrax if they are interested. Otherwise, I'm pleased with the cover. It was simple to align and adjust. Looks great, and the fit is perfect. It works smoothly, but does require some muscle power to pull it out of the front box to close it. Opening is effortless as it glides into the box at the front of the bed. Hopefully it will provide years of service.


Excellent option for my purposes !
to haul kayaks and bikes on load bars , while 5th wheel hitch , along with other gear is securely locked in the bed .


The real test if someone likes a product is, would they buy it again? And yes, I bought a second RetraxPRO! The first Retrax was on a 2020 GMC half ton then, I traded that truck in for a 2021 GMC one ton dully. Since I went from a short bed to a long bed, I bought another RetraxPRO. The thing is awesome!



The Retrax Pro HR and Yakima Overhaul HD is a perfect combo and works well together.


Thanks etrailer. Ordered the Yakima Overhaul ladder racks and the Retrax tonneau cover. It’s the perfect solution for our camping/kayaking trips. Both products are solid and top notch. Installation was a breeze on my 20 Tundra.


Product looks great and operates as advertised. Very sturdy. You can put it together by yourself but just watch lifting it (there is a good video on YTube). Haven't had it in the rain yet to see how "water resistant" it is but the see potential gaps in the front rubber seal.


I like the design and the convenience of not flipping it. It's not completely water proof as I'd like. The rails for the the Thule mounts and bike rack are awesome!!


Order was processed quickly and arrive in the specified shipping time. Easy two person install and fine tuning is an easy one person job. Great quality top and rugged. Perfect top for your pickup. Bed stays water tight so storing sleeping bags or luggage is no problem on long trips.


It leaks in the rain - having a local shop look at it this week. Leaks a bit on the side but it's also leaking on top in a couple of areas - was hoping it would be a bit more waterproof for the inside of the truck


Love everything about the cover except.... Retrax should put a clear tape on the back lip. It’s an easy place to chip the powder coat and some clear tape would have kept it perfect after a year. Otherwise I couldn’t be happier. If you purchase one I would suggest doing what I think the manufacturer should have done to begin with.


I purchased this cover for my 2020 F-350 standard bed truck because I tow a fifth wheel RV and didn't want to gamble on a folding or roll-up cover that may or may not get in the way. The loss of bed space is certainly a down side, but I think the ruggedness and secure feel make up for it. The next challenge I have is living in Michigan with the snow and ice combined with not regularly keeping my truck inside a heated garage. The cover gets snow and ice build up on it which makes it very challenging to open. This isn't really a complaint, just something for potential buyers to think about.

My one issue with this cover is the high price combined with this cover having some water intrusion issues. It definitely leaks at the corners where the side rails, retractable cover and tailgate all come together. It also leaks from somewhere else causing water to drip on my 5th wheel hitch. I cannot tell if it is leaking between the actual slats, or if maybe it is leaking from the bedrail somewhere and running down the slats underneath and then dripping down. Regardless, for the price, I had hoped for the cover to be more waterproof without the need to investigate time troubleshooting leaks and trying to correct them.


Retrax Pro XR with Rhino Rack Cross Bar set for the XR

This has greatly simplified my bicycle transport. Before I was using separate ladder rack on back of trailer, and hitch rack on truck. Compared with my prior setup, here are the improvements:
-- removes ~75 lbs from back of my trailer
-- not dealing with separate truck and camper bike racks (esp hitch rack taking up bed room while towing)
-- don't have to unload bikes to check something on camper roof
-- bikes are easier to load (even with lifting)
-- cross bars detach in seconds and lift off for full bed access or car wash (the cross bar and bike rack assembly stores on hook in garage)
-- Don't have to remove and store bike seats (they extended well past right side of trailer when on ladder rack)
-- Bikes are more protected above tonneau cover than either on hitch rack or ladder rack.


Perfect in every way, just what we needed for on the road, the locking feature is awesome.


I had a solid tonneau before and liked it. Only problems with it were you could not drive with the cover up and it was a bear to remove even with the help of my wife. That truck was totaled by a drunk driver. So the replacement truck had to have an easier cover and wile I was at it, why not some racks as well?
It looks great! Fits perfectly and was a synch to install.
On the down side it is not completely dry and it did freeze up once in the winter. Other than that I do like it and gave it 4 stars


Well designed and durable tonneau cover. Easy to install and works like a charm a year later. Highly recommend if you have the $$.


Terri from etrailer was most helpful with helping me select a Tonneau cover and rack for my vehicle that I could get within a specific time frame. I did not realize a kit to mount the rack to the tonneau cover was required until later that day. I emailed and called Terri panicking because the kit was showing out of stock until the end of October and we were moving in September. When I spoke to Terri she had realized that I needed the kit and somehow was able to procure one. The rack and adaptor kit arrived 2 or 3 days later. The Tonneau cover is shipping directly from the factory and has not yet been received to review. I highly recommend Terri and etrailer and would definitely purchase from them again. Matt M.


Customer service 5 star.
UPS 3 star.
(came damaged 2 times)


This product is awesome. It was super easy to install and functions flawlessly. The roll up method of operation is the reason I bought it and it work perfectly. Highly recommend.


I have a local dealer I normally buy my truck accessories from. For the RetraxPro XR they quoted me $800.00 more than I could get from etrailer. Drawback was I had to install it myself. I liked the fact that I didn't have to drill any holes into my truck's bedrails so I decided to put it on myself. I followed the instructions and adjusted everything the way I was told. 45 mins later, it was installed by myself and haven't had to re-adjust since. I always have people ask me about it. It looks great, operates easily, doesn't freeze up in the winter months, locks in any position and is a great addition to my truck accessories. Purchasing it from etrailer was simple, saved me a lot of money and arrived with no damage. I now look to etrailer for my truck and RV accessories. I've had to contact them in the past for different items and the support is wonderful. Thanks etrailer...


Overall the product is good. The only thing that I have a little issue was the water drainage hose could have been built little sturdy. May be I missed something, but it keeps on popping out from the retractor box. Besides that it's great.


The tonneau cover housing arrived damaged even though it was packed properly. The manufacturer sent a replacement part that arrived one week later, but I was required to actually repair the product myself. Not the best experience with Retrax. Once repaired the installation was fairly easy except for the drains which don't fit into the opening correctly and are very difficult to install as they won't stay in place. Also, the cover leaks water on the passenger side.


It helps to have an individual customer service representative, Terri N is my go to representative for all my etrailer purchasing. Terri follows my orders throughout the process, and follows up after delivery.
Ordering the Retrax Pro Xr was not different, I am usually on a timeline and cannot wait weeks for the standard delivery process; the Retrax Pro XR was delivered in less that a week. Two boxes, well packed, and protected arrived, ready for installation. Installation took around 1 1/2 hours, with most of it being done by myself. You will need another body to lift the unit into the truck bed, after that it is an easy process of alignment and anchoring. I had to adjust my rail width, to get under the maximum allowed dimensional tolerance.
As the instruction indicated the unit will loosen after a few uses; still requiring some effort to slide it, but that is a good thing.
It is very well made, with a clean fit and finish.


Great cover for a 2020 Ram 1500. I primarily use it to haul my bikes and kayaks around, and it's awesome for keeping gear secure. If you have the multifunction tailgate, you have to do a little extra work, but there is a great YT video that walks you through it. I was able to install the whole thing in about an hour. It pairs great with the Yakima racks (also purchased here), too. Service from etrailer was great both times. Pricey but totally worth it.

Show More Reviews

See what our Experts say about this Retrax Tonneau Covers

  • Will the RetraxPRO XR # RTT-80485 Fit a Dually 2022 Chevy Silverado 3500 Long Bed?
    Yes! I am happy to say that the RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black # RTT-80485 will fit your dually 2022 Chevy Silverado 3500. I went ahead and attached a photo of our neighbor's 2020 Chevy Silverado 3500 dually long bed with the # RTT-80485 installed to give you some perspective of the fit.
    view full answer...
    Image 1 for
  • Does the RetraxPRO MX # RT80485 Fit My 2021 GMC Sierra 3500 with an 8-Foot Bed?
    Yes, the RetraxPRO MX Hard Tonneau Cover # RT80485 will fit your 2021 GMC Sierra 3500 with an 8-foot bed. This model also comes with the option for side accessory tracks. That part number is # RTT-80485. The accessory tracks gives you the ability to to install a roof or ladder rack and carry items over the bed if needed.
    view full answer...
  • Correct RetraxPRO Hard Tonneau Cover for a 2022 GMC Sierra 3500 with 8 Bed
    The correct RetraxPRO Hard Tonneau Cover for a 2022 GMC Sierra 3500 with 8' bed is part # RT80485 or part # RTT-80485 for the model with t-slots in the side rails for attaching accessories.
    view full answer...
  • Retrax Tonneau Cover Options for a 2020 GMC Sierra 3500 with 8 Foot Bed
    I spoke with Retrax and they offer two cover options for the 2020 GMC Sierra 3500 with 8' bed, the RetraxPRO MX Hard Tonneau Cover part # RT80485 and the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails part # RTT-80485. I recommend the RetraxPRO XR Hard Tonneau Cover because the integrated tracks allow you to install a roof or ladder rack and carry items over the bed if needed. The PowertraxPRO MX Hard Tonneau Cover isn't offered for the long bed model.
    view full answer...
  • Retrax Tonneau Cover Options for a 2022 GMC Sierra 3500 with 8' Bed
    We have two Retrax tonneau covers available for your 2022 GMC Sierra 3500 with 8' bed. The RetraxPRO XR Hard Tonneau Cover # RTT-80485 and the RetraxPRO MX Hard Tonneau Cover # RT80485. Both covers are made in the USA, feature a no-drill installation and will provide you with a retractable cover allowing full use of your truck bed in seconds. The difference between the two covers is that the RetraxPRO XR Hard Tonneau Cover # RTT-80485 has an integrated track system to allow you to use...
    view full answer...
  • Is There A Retrax Bed Cover Available to Cover A B&W Hitch In A 2022 GMC Sierra 3500 With 8 Foot Bed
    We actually have two Retrax tonneau covers available for your 2022 GMC Sierra 3500 with the 8 foot bed. Both of these will definitely be great retractable options for keeping your hitch safe and secure from the elements, but the RetraxPRO XR # RTT-80485 is designed with tracks in the side rails for a ladder rack and may not really be applicable for what you need it for, so this will be the only time I mention it. With that said, check out the RetraxPRO MX Hard Tonneau Cover # RT80485....
    view full answer...
  • Retractable Hard Tonneau Cover Options For 2021 Silverado 3500 Dually With 8 Foot Bed
    I have a solution for you, but the Pace Edwards Jack Rabbit Hard Truck Bed Cover # PE54UV that you were looking at is only compatible with trucks that have single rear wheels and it will not work for your dually. For your 2021 Silverado 3500 Dually with the 8' bed, I think a great option would be the Retrax RetraxPRO MX Hard Bed Cover - Retractable - Aluminum - Matte # RT80485. This is a high quality hard cover that is black and retractable just like you wanted. It sits 1" above the...
    view full answer...
  • Recommended Tonneau Cover and Ladder Rack for a 2020 GMC Sierra 3500 Long Bed
    Thank you for all of the details! I have the perfect combination for you to use for the outdoor cargo on your 2020 GMC Sierra 3500 long bed. If you check out the RetraxPRO XR # RTT-80485 you will see a number of features that specifically meet your needs. This is a retractable cover that can be locked in any position along the rails. Not only does this mean quick access to any cargo you might need in your bed, but it also provides enough security that you can lock the cover and your truck...
    view full answer...
  • Recommended Tonneau Cover and Ladder Rack For a 2024 GMC Sierra 3500 Long Bed
    I recommend the RetraxPRO XR Hard Tonneau Cover # RTT-80485 and Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-5955 as the best combination for your 2024 GMC Sierra 3500 long bed. The ladder rack will mount to the t-slot channels in the Retrax tonneau cover. This allows you to more easily remove and install the rack when not needed.
    view full answer...
  • Do the Roll Up Tonneau Covers for a 2024 GMC Sierra 3500 w/ a 6-3/4 Foot Bed Come in Frost White?
    No, I am sorry none of the roll up tonneau covers are available in frost white or any color other than black. I have attached a link below to our entire selection. The RetraxPRO XR Hard Tonneau Cover item # RTT-80485 you were looking at fits the 8' bed lengths of the 2024 GMC Sierra 3500. If you're interested in this retractable cover you would need item # RTX46SR which fits the 6-3/4' beds.
    view full answer...
  • Recommended Tonneau Cover and Ladder Rack Which Fit Together On a 2023 Chevy Silverado 2500
    I recommend using the Yakima OverHaul Ladder Rack # Y01151-5855 with the RetraxPRO XR Hard Tonneau Cover # RTT-80485 on your 2023 Chevrolet Silverado 2500. This tonneau cover has built in T-slots on the rails mounting to your bed rails. This will allow you to easily slide in the OverHaul ladder rack while also allowing you to slide the towers forwards or back for irregular size loads. Best of all the entire system requires no drilling for the installation so you can easily install it and...
    view full answer...
  • Recommended 5th Wheel Hitch and Tonneau Cover for 2022 Chevrolet Silverado 3500
    I suggest the B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package, # BWRVK3715. I like the 1" thick jaws on the Companion. The cam-action latching handle helps prevent binding, is simple to release, even on unlevel terrain. The B&W is noted as having a superior powder coating and is made in USA with materials sourced from the USA too. This hitch has multiple height settings but even on its highest setting it will still set below the top of the bed rails. So something...
    view full answer...
  • Is There A Retractable Bed Cover Available For A 2022 Chevy Silverado 3500 Dually With An 8 Foot Bed
    As your 2022 Chevy Silverado 3500 with the 8 foot bed has the dual rear wheels, you will be a little limited for retractable tonneau covers. But all is not lost. We do have two options from Retrax that will fit your new truck and I have them listed below. RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black # RT80485 RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots # RTT-80485 Between the two of these, I do prefer the # RTT-80485...
    view full answer...
  • Retractable Hard Tonneau Cover for 2022 Chevy Silverado 3500 Dually w/ a Long Bed
    For a retractable hard tonneau cover that fits your 2022 Chevy Silverado 3500 Dually Long bed you can use either the RetraxPRO MX item # RT80485 or XR item # RTT-80485. These are nearly identical with the only real difference being the XR version comes with rails on the sides that have a T-Slot so you can utilize a rack like the Yakima OverHaul HD ladder rack. If you're interested in adding a ladder rack you'll need the following: OverHaul HD - 68" Bars item # Y01151-58 or 78" Bars item...
    view full answer...
    Image 1 for
  • Can Yakima Overhaul HD Ladder Rack Install with Tonneau Cover
    The Yakima Overhaul HD Ladder rack part # Y01151-58 can install with a Rextrax XR tonneau covers with the adapter part # Y01155. Since I am pretty sure you have a 2020 GMC Sierra 2500 you'd want the # RTX46SR for if you have a short bed or part # RTT-80485 for if you have a long bed.
    view full answer...
  • What Tonneau Cover with Accessory Rails Fit My 2022 GMC Sierra 3500 with 8-Foot Bed?
    I have a great alternative for you. I finally received an answer from my tech at Pace-Edwards. They said that they do not offer Explorer rails for the Full-Metal JackRabbit # PE82CV for your 2022 GMC Sierra 3500 with an 8-foot bed. However, with that being said, we do offer a system that is similar to the Explorer rails. That is the RetraxPRO XR Hard Tonneau Cover - Retractable - Accessory T-Slots # RTT-80485. Like the Explorer rails on the JackRabbit, the RetraxPRO XR comes with Trax...
    view full answer...
  • Parts For Single Bar Roof Rack & Single Bar Ladder Rack on Retrax XR Tonneau on 2024 GMC Sierra 3500
    Okay, this is going to be quite a few parts but I'll go ahead and list out everything for a single bar roof rack and single bar ladder rack for your 2024 GMC Sierra 3500 and the RetraxPRO XR Hard Tonneau Cover # RTT-80485: Roof Rack Parts - Yakima BaseLine FX # Y83TR - BaseClip Fit Kit # Y06124 Ladder Rack Parts - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y47TR - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y67TR - Tonneau Cover Adapter Kit...
    view full answer...

Do you have a question about this Tonneau Cover?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Tyler C
Edited by:
Tyler C
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Mark S
Written by:
Mark S
Employee Aidan B
Test Fit:
Aidan B
Employee John S
Video by:
John S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.