See what our Experts say about this BAK Industries Tonneau Cover

• Will BAKFlip MX4 Hard Tonneau Cover BAK48602 Fit 2026 Honda Ridgeline
  Hello Ray, thanks for reaching out, and congrats on the new car! The BAKFlip MX4 Hard Tonneau Cover # BAK48602 is indeed the correct fit for the 2026 Honda Ridgeline. We do have an installer locator but I am not really seeing we have any tonneau cover installers near you. You could try checking with Paradise RV, LLC in North Charleston. I know they do RV, work but I am not 100% certain if they do tonneau covers. If not, really any shop that works on cars should be able to do it. If you...
  view full answer...
• 2020 Honda Ridgeline RTL-E with Composite Box Tonneau Cover Options
  The 2020 Honda Ridgeline has many model Tonneau covers that fit the composite bed/box. My recommendation is the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK48602 which offers a clean matte finish that matches your truck's OEM molding color really well. This installs to the composite bed without clamps and instead uses bolts. You will remove the 4 upper tie down hooks and reuse the 8 torx bolts so you will need a T50 Torx driver. There is a supplemental installation...
  view full answer...
  
• Recommended Tonneau Cover for a 2017 Honda Ridgeline that Retains All Factory Truck Bed Features
  The BAK Revolver X2 Hard Tonneau Cover part # BAK39602 is a confirmed fit for your 2017 Honda Ridgeline. The durable aluminum slats located underneath the cover makes this cover a favorite among customers. In regards to fitment on your Ridgeline, the BAK Revolver X2 will not interfere with the dual action tailgate but will limit the access to the trunk in your truck bed to about 75% while the cover is both closed/open. This interference is due to the location of the rails for the tonneau...
  view full answer...
• Folding Tonneau Cover for a 2022 Honda Ridgeline
  I have a great Tonneau cover for your 2022 Honda Ridgeline. It is the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish item # BAK48602. This cover will sit inside your Honda Ridgeline's bed rails and secures upright for unrestricted bed access. The tailgate opens and closes with the cover up or down.
  view full answer...
• Recommended Folding Tonneau Cover for 2017 Honda Ridgeline
  I am not too familiar with the OEM tonneau cover for your 2017 Honda Ridgeline, but I did do some research on the cover so I could compare it to the aftermarket covers we have available. From what I could find, it looks like the OEM cover from Honda is a tri-fold design that will install inside the bed rails, similar to both the BAKFlip MX4 # BAK48602 and BAKFlip G2 # BAK26602 that you referenced. From here, there are a few differences that make me recommend the BAKFlip MX4 # BAK48602...
  view full answer...
• Will BAKFlip MX4 Tonneau Cover Restrict Trunk Access on 2022 Honda Ridgeline
  The BAKFlip MX4 Hard Tonneau Cover # BAK48602 is a great option for your 2022 Honda Ridgeline, and I especially like the matte black finish. I will number my answers to match your questions: 1. The drain tubes will fit in the same plugs that are already existing on your truck. You can either remove the plugs or you can drill a 7/8" hole through the plastic plug if you'd rather go that route (see attached photo from instructions). 2. You will be able to still open up the trunk in the bed...
  view full answer...
  
• Where are the Drain Plugs Located to Install the BAKFlip MX4 # BAK48602 on a 2022 Honda Ridgeline?
  It looks like you are looking at the BAKFlip MX4 Hard Tonneau Cover # BAK48602 for your 2022 Honda Ridgeline. According to the installation instructions, the drain plugs are toward the front of the truck toward the cab. There are small plastic tabs that cover the plugs that you most likely need to remove. I went ahead and attached a photo of the location for your convenience. If plugs are not there, you most likely do not have drain tubes that come standard on your 2022 Ridgeline. If...
  view full answer...
  
• Do Tonneau Cover Rails Allow Trunk Lid of 2019 Honda Ridgeline to Open
  BAK has told us that with their tonneau covers installed like the Flip MX4 Hard Tonneau Cover # BAK48602 you still retain 75 to 80 percent of the total access to the trunk. This means that the rails will prevent the trunk from opening past them.
  view full answer...
• Which BAKFlip MX4 Fits My 2021 Honda Ridgeline?
  The BAKFlip MX4 # BAK48602 will fit your 2021 Honda Ridgeline and the installation instructions are pretty simple and straightforward.
  view full answer...
• Installation of BAKFlip MX4 Tonneau Cover Drain Tubes on 2017 Honda Ridgeline
  The BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK48602 is a fit for your 2017 Honda Ridgeline. The drain tubes install in a different location on your vehicle. I reached out to my tech contact and he said there is a bolt in the bed floor of your truck that gets removed for that drain tube to install in. The hole is slightly smaller than the diameter of the tube so they recommend making 4 very small slices like a pizza to allow that tube to fit that hole and...
  view full answer...
• Where are Tonneau Cover Drains for 2019 Honda Ridgeline Installing BAKFlip MX4
  The drain holes on your 2019 Honda Ridgeline are near the front of the truck bed. I took a picture from the install instructions for the BAKFlip MX4 part # BAK48602 that fits your truck that covers this portion of the install.
  view full answer...
  
• What Tonneau Cover Fits with Vantech Ladder Rack on a 2023 Honda Ridgeline
  Hey Danny, thanks for reaching out! We've found that the BAKFlip MX4 Hard Tonneau Covers, like part # BAK48602 that fits your 2023 Honda Ridgeline, typically only fold up well if the uprights for the ladder rack aren't angled in, which it looks like is the case with your Vantech P3319 ladder rack. Your ladder rack might work, but we unfortunately haven't tested it and don't have a way to test it. My recommendation is to go with the BAK Revolver X4s Hard Tonneau Cover # BAK78ZR instead...
  view full answer...
• Hard Folding Tonneau Cover that Can Stay Closed when Closing Tailgate on 2017 Honda Ridgeline
  With the BAKFlip Tonneau cover # BAK72602 for your 2917 Honda Ridgeline you do need to have the rear most panel open before closing the tailgate or it could damage the cover. But there is a cover that will allow you to close the tailgate with the cover up or down. For your Ridgeline it is the BAKFlip MX4, # BAK48602. The design of the MX4 will allow you to close the tailgate whether the cover is up or down in the closed position. The biggest differences between the MX4 and the F1 is that...
  view full answer...
• Is There a Screw Head to Remove the Holes in the Side of the Bed for the BAKFlip MX4 Drain Tubes?
  I have an answer for you. Unfortunately, since each model of truck has different bed-liners and bed-liner components, we cannot confirm whether there is a screw in the position where you need to remove part of the bed to feed through the drain tube of the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum # BAK48602. However, there should be some kind of plastic cover or some other kind of opening. If there isn't, it is possible that you will need to either drill a 7/8" inch hole in your...
  view full answer...
  
• Will Tonneau Cover Affect Truck Bed Trunk Operation on 2019 Honda Ridgeline
  The BAKFlip MX4 Hard Tonneau Cover # BAK48602 is a great option for your 2019 Honda Ridgeline and would still allow you access to the truck bed trunk when the cover is installed. With any tonneau cover you may just have about 75 to 80 percent access when it's folded back but otherwise the two components will not interfere with each other. The BAKFlip MX4 is an excellent hard fold-up tonneau cover that features 1/2 inch thick aluminum rails that will resist corrosion and matte black rubber...
  view full answer...
• Does BAKFlip MX4 Tonneau Cover for 2019 Honda Ridgeline Come With a Lock
  The BAKFlip MX4 Hard Tonneau Cover # BAK48602 does not come with a separate lock with a key but it still offers security for your 2019 Honda Ridgeline. The reason for this is when the panels are down they are latched into place on the inside so as long as your tailgate is locked your '19 Ridgeline will have a completely secure bed. If your '19 Ridgeline does not have a lock I strongly recommend adding the Pop & Lock Custom Tailgate Lock # PAL8600. I have added a link to a video of this...
  view full answer...
• Could Bed Extender Interfere with Install of BakFlip MX4 on 2019 Honda Ridgeline
  The BakFlip MX4 part # BAK48602 that you referenced is the correct part number for your 2019 Honda Ridgeline. It's hard to say for certain if your bed extender would be an issue as there are several different types and depending on the design it could prevent the cover from shutting all the way or might not at all. If the extender does not have any portion of it that goes above two inches below the top of the tailgate then it would not interfere at all. If there is a portion that goes above...
  view full answer...
• Does BAKFlip MX4 Hard Tonneau Cover BAK48602 have a Seal at the Cab Side for a 2018 Honda Ridgeline
  The front (cab side) of the BAKFlip MX4 Hard Tonneau Cover # BAK48602 for your 2018 Honda Ridgeline has a seal that, when the cover is properly installed, will keep out water. You could add additional material such as # PARTS-326A0004 but doing so may not allow the cover to close at the front properly.
  view full answer...
• Does BAKFlip MX4 Tonneau Cover For 2020 Honda Ridgeline Come With A Lock
  The BAKFlip MX4 Hard Tonneau Cover part # BAK48602 does not come with a lock per say but the panels do latch so when the tailgate on your Ridgeline is locked the cover cannot be opened. Once the tailgate is locked you will have a completely secure bed on the 2020 Honda Ridgeline.
  view full answer...

Do you have a question about this Tonneau Cover?