bing tracking image
  1. Nerf Bars - Running Boards
  2. Aries Automotive
  3. Running Boards
  4. Black
  5. Cab Length
  6. 4-1/2 Inch Wide
THIS ITEM IS NOT A FIT FOR
2014 Dodge Ram Pickup
Aries Automotive

Aries ActionTrac Motorized Running Boards with Custom Installation Kit - LED Lights

Part Number: AA3048324
In Stock
$2,047.40
Retail:$2,634.95
You Save: $587.55
Nerf Bars - Running Boards
Not Confirmed to Fit

2014 Dodge Ram Pickup

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
ActionTrac motorized running boards automatically deploy a second step as your vehicle's doors open and retract when the doors close. Integrated LEDs and obstruction-sensing smart system enhances safety. Easy installation with custom fit kit. Fastest Shipping and Great prices for Aries ActionTrac Motorized Running Boards with Custom Installation Kit - LED Lights. Read our customer reviews of Aries Automotive nerf bars - running boards. Call 1-800-940-8924 for expert service or order your nerf bars - running boards part number AA3048324 by Aries Automotive online at etrailer.com.
  • All Info
  • Reviews (114)
  • Q & A (0)
  • Photos

Aries Automotive Nerf Bars - Running Boards - AA3048324

  • Running Boards
  • Black
  • Cab Length
  • 4-1/2 Inch Wide
  • Aluminum
  • Powered Retractable Step
  • Aries Automotive
  • Matte Finish

ActionTrac motorized running boards automatically deploy a second step as your vehicle's doors open and retract when the doors close. Integrated LEDs and obstruction-sensing smart system enhances safety. Easy installation with custom fit kit.


Features:

  • Motorized running boards lower automatically to create a pair of steps on each side of your vehicle
    • 2nd Step deploys and retracts from main housing when doors open and close
  • Raised treads provide traction in all weather conditions to help you safely enter and exit
    • Built-in design means there aren't any step pads that ever need to be replaced
  • Smart system keeps steps from deploying or retracting when an obstruction is detected
    • Prevents risk of pinching and damage done to steps by large rocks or other impediments
  • Integrated LED lights activate upon deployment to improve visibility and ensure safe entry and exit
  • Power override switch lets you disable automatic step function and LEDs
    • Keeps steps lowered with doors closed to easily access the roof
    • Keeps steps from deploying when doors open if you don't need them
  • Step-within-a-step design doesn't significantly decrease ground clearance when steps are undeployed
  • Main housing protects power step, pivot points, and electronics from weather and debris
  • Rotary motors in each step provide fast, quiet, maintenance-free operation
    • Steps operate independently to reduce wear and tear on motor and components
  • Extruded aluminum construction with black powder coat is durable and corrosion resistant
  • Custom installation with included mounting kit - no drilling or wire splicing required
    • Wiring harness connects directly to vehicle battery via door panel
    • Mounting brackets attach to frame using pre-existing factory holes
  • Made in the USA


Specs:

  • Step dimensions:
    • Top step: 88" long x 4-1/2" wide
    • Deployed step: 72-1/2" long x 3-1/2" wide
  • Step extension: approximately 8" down from top step
  • Step capacity: 650 lbs
  • Quantity: 2 running boards, 2 LEDs, and 6 brackets
  • Limited lifetime warranty


3025124 Custom Mounting Brackets for Aries Action Trac Powered Side Steps

3025183 Aries Action Trac Powered Side Steps - LED Lights

Installation Details AA3048324 Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.4

114 reviews
5 Stars
(77)
4 Stars
(23)
3 Stars
(5)
2 Stars
(2)
1 Star
(7)
Review Sort Icon
by:
2006 Ford F-350 Super Duty
The running boards have worked perfectly. the closed height is unobstructive for normal 4x4 use and the down position makes entry and exit easy even for persons with dexterity problems.
the light package is adequate for front and rear doors.
Installation went well, leave all bolts loose until mounted then tighten seems to make it easy.
I would highly recommend.
Glenn profile picture

Glenn

8/23/2024

Great, Wife would be unable to us the truck without them, me too some days. They were easy enough for one person to install working on the ground senior. We also have a disabled friend that we must use the truck to get her to dR. visit and she can use them. No heavy 4X4 usage but some. Ford 1 ton pu 4X4 high enough to need them. I thought during installation the the lights would not be enough but they work perfectly. Looks and performs as good today as when I installed them.

by:
by:
Pretty easy to install, works great! Would but again!
by:
2026 dodge Ram Pickup
They are very sturdy and install is not too hard. The wiring harness is top notch and includes everything you need. They fold up and look like a plain step bar until you open the door then the bottom step swings down and makes accessing my Ram 5500 much easier! I know the application says it won’t fit a 4500 or a 5500 but I assure you they fit any Ram 2500-5500. No cutting into the factory wiring harness, all the steps need are +12 volts from the battery and a ground screw.
Mike L. profile picture
Etrailer Expert

Mike L.

8/12/2026

The boards look great on your truck Kenneth! Thanks for the photo!!

Ken I. profile picture

Ken I.

8/12/2026

@MikeL. I tried to upload a 10 second video of them in operation but it kept failing.
by:
2017 Jeep Wrangler
All brackets has areas that didn’t get coating and rust was starting to form. Primed with cold-galv paint then followed up with satin black.
Instructions were not in color as stated, black and white photos hard to make out. Had to cross reference on the web in addition to the instructions to install.
The running boards … one opens and closes louder then the other which is startling at first but very pleased, works as advertised, looks good.
by:
My wife has had hip and knee replacement and we had to carry a step for her to get into our Chevy 2500HD. With these running boards the step extends low enough she can get in and out on her own, well worth the install.
by:
I liked the idea of a two step running board. My wife has had operations
on her knees and was difficult for her to get into her jeep
with the
standard side steps. I started looking for powered steps and these
sounded like just the ticket. There was some fabrication involved,
because I installed them on a 2000 TJ Wrangler, but nothing too crazy. I
used some 3/16" flat bar and sandwiched it between the body mounts. In
retrospect, I should have used C channel for the longer front mount,
because I had to weld gussets on it. Welded a piece of angle to the
flat bar for the supplied mounts. If you don't have a welder, it could
all be bolted in with the C channel.
I also didn't care for the supplied magnets and switches held on with
tape to operate the steps. We hit up the u-pull-it wrecking yard and got
the same style switch that operates the dome lights and I installed them
above the original switches.
I put the door delete bypass in the housing for the front speakers on
the dash.
They have been installed for about two months now and we've had no
problems with the operation. Lots of likes from our friends who see them
in operation.
Leroy profile picture

Leroy

2/19/2025

One year update. Still loving the running boards. No problems with function or looks. They have had a lot of mud washed off of them. The powdercoat is tough and still looks great.

Kate F. profile picture
Etrailer Expert

Kate F.

2/19/2025

@Leroy Glad you are still happy with your purchase Leroy! Happy to hear that the powder coat is still holding up too!
by:
2017 Chevrolet Colorado
I love the steps. Did a self installation and it was not too bad, just time consuming. I wish it came with more split loom and of bigger diameter. I bought 1 in. split loom as I feel the wiring was too exposed under the vehicle. Silly thing, the sensors were the most painstaking task, as mine were simply not lining up right. Thank you.
by:
Install was no joke. Hard part is the wiring. Had to remove the rear interior and pillar panels to install harness and four door switches. Has to be a better way, like tapping into the door light switch wire to trigger the steps!
Steps are nice, I like how there are two steps compared to the other guys power step. Lot easier on the seat bolsters getting out instead of sliding out to a lower step.
by:
I bought them for my dad so he can get in and out easily. I like the on off switch because I don't use them unless he's riding with me.
Brian profile picture

Brian

5/2/2026

I take my dad riding as often as I can to get him out of the house. He couldnt get in or out without them. They are a blessing. I havent worked on the once since I installed them.

by:
Love them. Only issue I have had with them is both side lights blink instead of being solid.
Victoria H. profile picture
Etrailer Expert

Victoria H.

3/13/2025

I really like how this install turned out on your Wrangler, Penny! There is a limited lifetime warranty on these. I'll make sure the right information is provided for you. Please keep an eye on your email.

by:
My wife can now get into my Chevy 2500HD without a step stool!
by:
2022 GMC Sierra 2500
Steve with TekRV, a mobile RV mechanic, out of Galveston did the installation. Everything went according to the instructions. Looks and works great. Co-pilot is happy, I am estatic.
Mark profile picture

Mark

12/8/2024

My truck looked so nice with the two step running boards that a thief stole it and wrecked running from law enforcement. Four months and $30 grand spent put my truck back on the road. The wreck bent the passenger side board but it still worked partially but both were replaced.

by:
Ford Transit Connect
Customer service was great. Received my running boards and in transit they had a minor dent on the top.Amy who was helping me , didn't think twice and sent me a whole new set in two days , which was great. The new set that I received were in perfect shape.
by:
First time for the power running boards. Wasn’t to hard to put on. Now that I did it once I’ll be able to cut down the time in half. Wife loves the fact that it has a two step to get into the truck. Especially with bad knees. A+ for us
by:
Fast shipping! I ordered a set of steps for an unknown vehicle and did not notice until I attempted to print installation instructions. I called etrailer and talked to Ashley who sent an email with return instructions as well as sending the correct set of steps to me. Fantastic customer service which is hard to find these days. Thanks Ashley!!!
by:
I was disappointed that there was no wording or switches with this product that was an additional cost had I known I wouldn’t have bought them
by:
2024 Chevrolet Colorado
Works great. Install wasnt too bad. If your handy its worth it.
by:
I order these for my 2022 Chevy 2500 they had them is stock and came fast. Very good fit bolted right on. It took me about 3 hours in my driveway to install them. They are about 12” off the ground when deployed. I like the 2 steps design very helpful. They look very nice and are built strong.
by:
These retractable running boards are "Almost" "Plug&Play" on Fords. First, I recommend Ford Upfitter Switches to power On/Off the boards (no drilling thru the truck firewall). Second, I found that I needed to Re-route/Re-group the wires thru the floor paneling...some wires needed to be on the Passenger side. Third, it would be nice if the RBoards did not have a low current draw on the battery when parked long term.
I would buy them again and do strongly recommend these RBoards. It is presently the best available choice on the market. I installed these boards myself in about 6-8Hrs.
by:
2022 Ford Bronco
Running Boards are exactly as advertised. Simple to install as long as you follow the instructions.
by:
Product looks great and works well.
by:
Work great and good quality but almost half of the nuts that were supplied would not go on the studs
by:
This is a custom install. Choosing the proper running board was easy, received order promptly.
by:
Chevrolet Colorado
These steps work very well. The installation of the bars are one of the most easiest I have seen. I have installed other brands and they took much longer. All the holes lined up as expected. The wiring is not for the faint at heart. We had to take the back seat out of the Colorado and peel back the carpet to run the wiring. The instructions were straight forward and easy to follow.
After owning these for a year they are still working like the day we put them on. We have had a few issues with the end caps of the walk boards being faded by the sun and turning white. The driver side light began blinking when the door was opened. I contacted the company and they sent me new end caps, stated that they had a bad batch sent to them that were not UV free and they sent a new light. I replaced the light and still have the problem. But the company appears to work well on warranty items. Only reason I did not give the the full 5 stars is due to the end caps fading and the light began blinking. Other wise I would purchase these again. They are not cheap by any means but are of a good quality.
Billie profile picture

Billie

2/7/2021

After owning these steps for a year they still work as they should. I still have a problem with the drivers step LED not lighting up, but other than that they work great. They have been in mud, snow, water and most everything the elements could throw at them. One thing to note is that when a lot of grime builds up on them they may be slow to go down or even stop working. I found that spraying a good non stick lubricant on the moving parts get them working again. You cannot blame the steps for that, its just mother nature throwing everything at it and I consider it part of maintenance when I do oil changes. Though more expensive than other steps they are worth the purchase to help gain access to your vehicle.

25
114
true
Show More Reviews

See what our Experts say about this Aries Automotive Nerf Bars - Running Boards

  • Recommended Wiring Harness for a Aries ActionTrac Running Boards on a 2004 Ford F-250
    Hey Gregory! The only way to purchase the wiring harness and controller for the Aries ActionTrac item # AA3048324 is with the Custom Mounting Kit for Aries ActionTrac Motorized Running Boards item # AA3025124.
    view full answer...
  • Will Aries ActionTrac Work With All Four Doors On 1999 Ford F-250 Crew Cab
    Hey Gary! The Aries ActionTrac # AA3048324 will run under all four doors on your 1999 Ford F-250 Crew Cab. The top step measures 88" long x 4-1/2" wide and the deployed step is 72-1/2" long x 3-1/2" wide. I also attached a picture below showing step 7 from the installation instructions. You can see that it calls for placement of the magnets on the first door, then says to repeat this for the other three, so it will operate with all four doors. If you have any other questions don't hesitate...
    view full answer...
  • What is the Warranty of the Aries ActionTrac Motorized Running Boards
    I spoke to Aries about the warranty of the Aries ActionTrac Motorized Running Boards like part # AA3048324. They are covered under a limited lifetime warranty but there are a few exclusions because there are multiple components. The limited lifetime warranty covers material and workmanship. The lights are covered by a three year warranty and the finish/hardware are covered by a five year warranty.
    view full answer...
  • How far Are The Aries ActionTrac Running Boards From The Door Threshold On 2016 Ford F-350 Crew Cab
    The Aries ActionTrac Motorized Running Boards with Custom Installation Kit part # AA3048324 is the correct fit for the 2016 Ford F-350 crew cab. The price is listed on the product page if you click on the part number link above. When the step is not activated the canister it stays in is tight with the bottom of the door unlike your step that is 10.5" down from the door frame. Once deployed the Aries ActionTrac is 8" from the top step. The deployed step comes down from the inside of the...
    view full answer...
    Image 1 for
  • How Far Down Do the Aries ActionTrac Motorized Running Boards Sit On a 2015 Ford F-350 Crew Cab
    The correct Aries ActionTrac Motorized Running Boards for a 2015 Ford F-350 Crew Cab are part # AA3048324. The first fixed step sits only a few inches below the pinch weld and the second extending step swings down about 8". The steps are completely enclosed on both ends so you don't have to worry about water getting inside and rusting. In regards to installation, there is no splicing into the vehicle required, just simply making connections and running wires from each step to the battery....
    view full answer...
  • Troubleshooting Aries ActionTrac Power Steps That Drop Down On Passenger Side When Hitting Bump F250
    Hey Steven. Since it is only the passenger-side Aries ActionTrac step # AA3048324 dropping when you hit a bump, I would start with the passenger-side door sensors/magnets rather than the motor itself. The ActionTrac steps deploy when the system thinks a door has opened, and the two sides operate independently. Check the magnets/sensors on both passenger-side doors and make sure they are still firmly attached, aligned correctly, and not moving when the truck hits a bump. A loose or poorly...
    view full answer...
  • Which Mounting Bracket Kit To Install Aries Action Trac Steps On 2014 F250 Crew Cab?
    Hey Dyaln, if you go into the fitguide under your vehicle, the running board kits there will include the boards and mounting brackets/hardware all in one kit! For example, you were looking at the ActionTrac brackets, so the whole kit would be Aries ActionTrac Motorized Running Boards with Custom Installation Kit - LED Lights # AA3048324. This includes everything necessary for installation. Nothing else is needed. Now if you had the correct ActionTrac steps 88" # AA3025183 and just needed...
    view full answer...
  • Are There Chrome Motorized Running Boards For 2011 Ford F-350 Crew Cab
    There are stainless steel running boards (which are a chrome-like look) for your 2011 Ford F-350 Crew Cab, but not a motorized option. The only motorized running boards that fit your truck have a black powder coat. So here are the options for either motorized in black or stainless steel for your 2011 Ford F-350 Crew Cab: - Aries ActionTrac Motorized Running Boards # AA3048324 - Rampage Xtremeline Running Boards # RA14190-14410
    view full answer...
  • Which Aries ActionTrac Motorized Running Boards for 2015 Ford F-450 Crew Cab
    Aries has a ActionTrac motorized running board that fits your 2015 Ford F-450 crew cab and chassis with the part #AA3048324 but these are 88 inches long and a completely different setup than it sounds like you have so a hardware kit would not adapt what you have now. Best option would be the # AA3048324 for a setup with correct steps and hardware. The steps are not interchangeable between vehicles by just swapping hardware unfortunately.
    view full answer...
  • What Aries Motorized Running Boards Fit My 2001 Ford F-250 Super Duty Truck
    If you have a 2001 Ford F-250 Super Duty with a Crew Cab, you will need the Aries ActionTrac Motorized Running Boards with Custom Installation Kit - LED Lights, part # AA3048324. These are the Aries Action Trac running boards that are compatible with your vehicle. These running boards are 88" long and they are cab length. I have included product description links and a video review link below.
    view full answer...
  • Which Motorized Running Boards Fit 2006 Ford F-350 Super Duty Crew Cab
    For motorized running boards that fit your 2006 Ford F-350 Crew Cab Diesel you need the Aries ActionTrac Motorized Running Boards with Custom Installation Kit - LED Lights # AA3048324. The # AA3025179 you referenced is not a confirmed fit for your truck. These running boards will provide you with the same 2nd step that deploys from the main housing. They also have integrated LED lights which will turn on when the 2nd step is deployed for improved visibility. These come with a limited...
    view full answer...

Do you have a question about this Nerf Bars - Running Board?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Wilson B
Updated by:
Wilson B
Employee Jessie B
Updated by:
Jessie B
Employee Matthew E
Updated by:
Matthew E
Employee Daron K
Written by:
Daron K
Employee Robert C
Installed by:
Robert C
Employee Conner L
Installed by:
Conner L

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.