This 15" x 6" steel trailer wheel has a 6 on 5-1/2" bolt pattern and a 4.25" pilot diameter. Beveled stud holes keep wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.
Features:
Specs:
Durable Acrylic Enamel Finish
This wheel has a durable acrylic enamel finish on the front. The finish is applied after the wheel goes through an environmentally safe zinc phosphate pre-treatment and is coated with an e-coat primer layer. Compared to powder coat finishes, this finish resists getting chipped from flying road debris or scraped from hitting a curb for a longer period of time. These acrylic enamel wheels performed for more than 1,000 hours in salt spray tests.
The stud holes on this steel wheel are beveled to ensure that the wheel stays tight against your trailer hub. This also eliminates the need to constantly retorque the lug nuts.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today we're gonna take a look at this Vesper 15 inch by six inch white steel modular wheel, with a six on five and a half inch bolt pattern. This steel wheel with modular design is sturdy and corrosion resistant. The white acrylic enamel finish resists chipping and other damage better than powder coat finishes. And this finish is applied after a zinc phosphate pre-treatment, and covers an E-coat primer layer. So it has an excellent corrosion resistance, with a salt spray rating of more than 1000 hours. The beveled stud holes are gonna help keep your wheel securely in place on your trailer hub, eliminating the need for constant re-tightening of your lug nuts.
As you can see, the valve stem is included, and this wheel meets SAEJ1204 standards. And the rim dimensions, as I mentioned is 15 inches in diameter, so measuring bead seat to bead seat, you can see we are sitting right at that 15 inches, and then looking at the width again, measuring bead seat to bead seat where the tire's actually going to sit on the wheel, we are sitting again right at six inches on that width. We mentioned that the bolt pattern is six on five and a half inches. That first number is the bolt pattern- obviously in the bolt pattern- is obviously the number of bolt holes. The second number to note's the diameter in inches of the circle on which the bolt holes sit.
So to determine the bolt circle diameter on wheels with an even number of bolt holes, you're just gonna measure from the center of one bolt hole to the center of the bolt hole directly across from it, and in this case, that's what's going to give you the five and a half inches on this bolt pattern. The wheel stud size is a half inch by 20, and this has a capacity of 2,830 pounds. The center cap is sold separately. If you do pick one up, just make sure that it fits the pilot diameter of 4.25 inches. Well, that's gonna conclude our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.