Grease cap fits trailer hubs with 3.125" inner diameter.
Features:
Specs:
Dimensional Information
| Part No. | Material Gauge | Flange Diameter (A) | Crown Height (B) | Flange Length (C) | Overall Height (D) |
|---|---|---|---|---|---|
| 1600 Series | |||||
| F001609 | 16 | 3.125" | 1.01" | 0.296" | 1.31" |
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Fulton Drive-in Grease Cap. Has the 3.125 outer diameter. Now this grease cap will tap onto the end of your hub on your axle and it protects your wheel bearings from any dirt or debris that could get in and destroy the bearings in your axle. Now this is made of a 16 gauge steel construction. Has a nice corrosion resistant zinc plating on it. This grease cap is designed for trailer hubs with the 3.125 inner diameter.
It is a drive in installation. You can see this flange right here, is what you'll tap into until it goes right up against the edge of the cap there. This is for a quantity of 1 cap. Flange diameter which is measured across here. Edge to edge is, put a ruler on it, and you can see it's right at the 3.125 measurement. The flange length which is the amount of flange that will tap into your hub.
It's going to be right at .30 inches and the overall height from the bottom to the very top of the dome is going to be right at 1.31 inches. That should do it for the review of the Fulton Drive-in Grease Cap with the 3.125 outer diameter.
Good stuff
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.