When your suspension mounts wear out, your trailer can start to wander or bounce. These triple-axle hangers bring the strength back with front hangers that stand 4-1/4" tall, giving a solid mount for 2" wide slipper springs. They’re designed to handle axle capacities from 3,500 lbs to 8,000 lbs, so the suspension stays tight and tracks straight under load.
A smooth-working suspension depends on proper hanger height and spacing. This set includes (2) 4-1/4" tall front hangers, (4) 3-1/2" tall center hangers, and (2) 5-1/4" tall rear hangers to keep your triple-axle setup level and aligned. The combination keeps equalizer geometry correct, which helps prevent uneven tire wear and harsh ride changes.
Getting the whole suspension working together is easier when parts are made to match. These hangers are designed to be used with equalizer kit AP302 or AP316, which provide the equalizers, bolts, and shackle straps needed for a full installation. That compatibility means each spring and axle moves through its travel the way it should, keeping the ride steady.
Whether you’re rebuilding a worn suspension or putting together a new triple-axle frame, these hangers simplify the job. They attach six leaf springs (sold separately) directly to the trailer frame, giving you a clean, sturdy foundation without guesswork. Built specifically for 2" wide slipper springs, they make it easy to get the spacing and fit just right before final weld-in or bolt-on installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Triple Axle Trailer Hangers for 2" wide slipper springs. These hangers are designed to suspend leaf springs from the frame of your triple axle trailer. These are designed for use with six leaf springs. Now the leaf springs we do sell separately on our website. These are designed to be used with an equalizer kit, part number AP302, or AP316 for a complete kit. Now those we do sell separately on our website, and the equalizer kits are what will include the equalizers, the bolts and the shackle straps for installing the springs to these hangers. This part includes everything shown here.
It includes the two 4 1/4" tall front hangers that have the 9/16 diameter bolt holes. The four 3 1/2" tall center hangers with the 7/8" diameter bolt holes, and then the two 5 1/4" tall rear hangers with the 5/16 diameter bolt holes. Now these hangers are designed for use on trailers with triple axles, 3,500 pound up to 8,000 pound axles. Now they do not include the components for mounting the axle to the springs. On the sizes, when they give you the sizes on these, what they're giving you, like on the front here, the front hangers, it's 4 1/4" tall front hanger. That measurement is from the center of the bolt hole to the top of the hanger, so if we get a ruler here, center to the top is going to be 4 1/4".
On the center, those are going to be 3 1/2", and same way, they'll measure from the center of the hole to the top of the hanger, 3 1/2" on all four center ones. Then the two rear ones, they're 5 1/4" tall. Same way if we go from the center to the top, 5 1/4". That should do it for the review on the Triple Axle Trailer Hangers for 2" wide slipper springs.
Ratings & Reviews
Ordered, delivered, timely, quality pro duct.
Everything was as described. Fitment was perfect
Made my install easy.
Perfect service all the way around peri od.
ordered for a restoration of older camper worked as expected
I sure do appreciate this company and their team. Parts weren't in stock, but they kept me updated on a consistence bases and that means everything to me as a customer.
Great job!
Ordered and received withing 3 days. Very fast shipping.
great product and shipping speed
Good quality parts. Hinges and bushings are good. High quality steel
Parts fit as they should and arrived on time.
The only way it could have been better if it came already installed.
Would be whole lot better if the (4) 4-11/16" Long x 7/8" diameter equalizer bolts (7845B) had grease fittings in them
I received the triple-axle hanger kit before the expected delivery date the product seam to be of good quality went on easy time will tell.
I ordered these products to rebuild a 1966 equipment trailer that had some serious suspension issues due to poor repair work by previous owners.
I was very impressed by your quality and service and plan on placing an order in the near future.
We did send an email to u requesting a drawing for correct installation of the hanger set. Wasn't sure how to set the springs in regards to the proper measuremnts for distance. We did not receive any respone
My order for triple axle slip spring suspension components was delivered on time and in good condition. The components are heavy duty and are everything that was described, a great kit . I turned my trailer over, cut away the old hangars and installed the new kit in a matter of a couple of hours. Extremely pleased with etrailers
product , price and service.
I just have one suggestion for this kit. The fiber bushings that go into the eye of the spring should be included in this kit. The cost is nominal but I had to run around to find these bushings has I did not have to replace the springs but the bushings were worn.
Thank you for the punctuality! The product arrived exactly as described on the website!!!!
Fast delivery and great product. Nice, heavy duty construction. Glad I purchased this style of hanger kit over the first one looked at. All bushings installed and good quality hardware.
Perfect
Great
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.