High-capacity suspension setups need a solid center connection, not one that flexes or wears out too soon. This rubber bushing with a steel sleeve replaces the center bolt bushing on your slipper spring equalizer for 10,000-lb Hayes axles. The steel insert keeps the bolt tight under load while the rubber body absorbs vibration so the suspension can move smoothly without metal-to-metal clunking.
At 4" long with a 1" inner dimension and 2-1/8" outer diameter, this bushing is sized right for heavy-duty equalizers. The dimensions match the factory fit, restoring proper geometry and keeping the axle alignment true. That means steadier tracking and less wear on connected parts.
Old or worn bushings can make every bump echo through the frame. The rubber material in this one cushions movement, cutting down on harsh impacts and road noise. It brings back the smooth, quiet motion your suspension is supposed to have.
Sold individually, this bushing drops into the center hole of the equalizer without extra hardware or complicated setup. It’s a straightforward way to refresh one of the most stressed points in the suspension and keep the system working as it should.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Rubber Equalizer Bushing with the Steel Sleeve. Now this bushing will replace the bushing on your center bolt hole on the Slipper Select Spring Equalizer for the 10,000 pound Haze Axles. That equalizer part number is 09138708. Basically, this bushing is designed to insert into the center bolt hole and the rubber bushing has a sturdy steel sleeve in it, you can see.
Few specs on this, the overall length, one end to the other, right at four inches, inner diameter of the hole is right at one inch, the overall outer diameter is gonna be right at two and one eight inches and this is for a quantity of one bushing. But that should do it for review on this Rubber Equalizer Bushing with the Steel Sleeve.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Installed works good
The bushing was exactly what I needed. Thank you.
Received product quickly. Exactly as de scribed.
Great place to get parts.
Product was a direct replacement and fit perfectly
Great service. great part. on time shi pping
Good to do business with
Great people to work with and very know ledgeable.
Needed the bushing for a job that was time sensitive, received it 2 days later with priority mail in spite of the heavy volume during black Friday and cyber Monday. Our customer was happy, so we are happy!
rubber bushings fit and worked great
All products that we have ordered from etrailer have been top notch.We are a repair and welding shop so we see a lot of different jobs. etrailer is a great supplier to have on our side.Thanks again
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.