2-1/2" Diameter round. LED trailer light serves as either a side marker light or a clearance light. Pirhana series combines modern design with vibrant lighting. Recessed mount with grommet (sold separately). Accepts 2-prong plug. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Piranha LED clearance or side marker light with reflector. Now by having our reflector built into the lens of our light it eliminates the need to get a separate reflector for our trailer. You can see we can reflect that light back. So that's going to let people know that our trailer is there even when we don't have our light turned on. At the back we'll have our two female terminals to allow our two prong plug to get hooked up. These prongs are available separately.
The two wire pigtail is available separately. You can find that here at etrailer.com. Just push that into place, now we're all wired up and ready to go. Turn on our power, and you can see our four LEDs light up there. Those LEDs are going to be a lot longer lasting than your typical incandescent bulb.
They're going to be much brighter, and more efficient. It has less power draw for the same or more amount of light. You can see the nice, bright light of our four LEDs there. One, two, three, four. Clearly makes us visible out on the road, even at night.It's compatible with 12 volt DC systems.
Again, you can find these pigtails available here at etrailer.com. Pretty simple to use there, you just need to hook up power and ground. Our LED is on an SMD construction circuit board so it's better able to withstand the shock and vibration. Again, our LEDs are more efficient, and there's also no maintenance with these. There's never any filaments that can break so you don't really have to worry about any kind of changing out bulbs, or worrying about that.
It is P2 rated, and DOT compliant, and this is made in the USA. When it comes to size, it has a 2 1/2" diameter, and it's about 15/16 of an inch deep. If we go from those terminals to the front face of our light we're just under an inch.Our power draw at 12 volts is 0.08 amps, so very little power draw, and this has a 10 year limited warranty from Peterson's. Excuse me. You can also purchase a gramut to go with the light. It's going to add a little bit more protection for our light, gives you a little bit of cushion from any road shocks. You can also mount it up with this in a 3" diameter whole, since it has that lip there to hold it in place. The gramut is available using part number 142-18 here at etrailer.com, and that's going to do it for our look at the Peterson Piranha LED trailer clearance or side marker light with reflector.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.