Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Upgrading to LED is an easy way to get better visibility and reliability. This 6-1/2" x 2-5/16" oval tail light uses 12 red LEDs behind a clear lens to handle stop, tail, and turn signals in one unit. The Miro-Flex faceted reflector boosts brightness while keeping the light efficient—drawing only 0.161 amps for stop/turn and 0.009 amps for tail at 12.8V. You get a crisp, modern shine that lasts up to 50 times longer than old incandescent bulbs, without ever needing replacements or worrying about broken filaments.
When moisture is part of the routine, this light is ready. The housing and lens are sonically sealed into a single waterproof unit that’s submersible. Water can’t seep in to corrode the circuit board or damage the diodes. Whether you’re dealing with rain, splashback, or full submersion, the sealed design keeps the LEDs protected and shining bright trip after trip.
A tidy install makes a big difference in how your setup looks and performs. This recessed-mount light fits neatly into a grommet (A70GB, sold separately) so it sits flush with your mounting surface. The lamp measures 2-1/4" deep from lens face to housing back and about 2-1/2" total when the plug is installed—perfect for snug spaces. It accepts an industry-standard 3-prong plug (A45PB or A47PB, both sold separately), so wiring is straightforward and compatible with common trailer setups.
The clear lens and housing are made from tough polycarbonate that stands up to routine wear without cracking or clouding. Since there are no bulbs to replace and no fragile parts inside, you can count on steady light output no matter how often it’s used. Backed by a lifetime warranty on the LEDs, this Optronics Miro-Flex light is built for the long haul.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to take a look at Optronics Miro-Flex Sealed 6-1/2 LED Stop, Turn, and Tail light part number STL22CCRB. This light provides the three basic tail light functions running light, brake light, and turn light. It utilizes a crystal clear lens and a red color chrome reflector. Inside are 10 LEDs that draw a total of .181 amps at 12.8 volts. Its designed to flush mount against your trailer using a grommet that wraps around the light. On the back you will find a port for an industry standard three prong plug to make your electrical connections.
Well go ahead and snap in our plug and hook the light up to a power supply so you can see what it looks like when it is lit up. We will be using our white wire for ground, our black light for our running light circuit, and finally the red wire for brake and turn. White to ground, red to brake or turn, and finally black for our running lights. Here you can see our running light is active and now well add a brake or turn signal. Now we will turn off the overhead lights so you can see what it looks like in the dark.
Again we have our running lights active, and theres the brake and turn. And thats it for Optronics Sealed 6-1/2 LED Stop, Turn, and Tail light part number STL22CCRB. .
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
these lights look good in my headache rack
Great light worked perfect easy to inst all.
works as intended
Looks good ,bright led's , easy install, 2 trips down the ramp and one is full of water already, bummer
bought these lights before looks great in headach rack bought two more to put in rear bumper
The lights look great. Very bright when connected. They are going to be used on a trailer I am building. Will be extremely satifsfied once fully installed
These are going to look great on my Haulmark motorcycle trailer. Can't believe how fast I got them.
Worked as expected. Not only brighter than the original incandescent lights but the Optronics Miro-Flex product looks great even when not lit.
Just got the lights this morning & they look great. I will install them this weekend and am hopeful that they will work as good as they look.
Your website is very easy to use, descriptions and videos leave no doubt as to what you are purchasing . True pleasure in doing business with etrailer.com!
Communication from start to finish were impeccable with etrailer, even with stocking delay of two items and items were delivered together ahead of schedule. Will gladly do business with etrailer in the future.
I made this purchase for my son's boat trailer. I ordered on the Monday before Thanksgiving and it arrived the day before. Everything arrived as expected and well packed. He can't wait to get this installed!
Ok the lights are awesome. One thing they didn’t show or explain very well is these in fact get brighter when they are hooked into either the turn or the brake with the running light. The thing they don’t show is the difference in how bright it is between running and then brake/turn. The difference is huge!
These are replacements for my enclosed trailer and they are considerably brighter. they are even more stylish than original Bulb type. Took about 5 minutes to replace using same original grommet mount.
I bought LED lighting for my trailer and some stern hold downs. Everything fit perfectly and work beautifully. I've been very happy with my products from you guys and will definitely use you again when I need more parts.
Awesome lights..i put them on my bass boat trailer and they look awesome and they aren’t like any other lights I have seen before. I have got a lot of compliments about how good looking a light they are and they even stand out when they not on as well and that a look I was going for..so if you want something different than everyone else don’t hesitate buy these.and the price is great too so your not breaking the bank by purchasing them. A+++ rating
Great set of lights and they shipped within two hours of ordering. Look great on my flatbed dodge. Only problem was, I was not aware I needed a resistor to use them on a vehicle but it's no big deal. I will be ordering a pair of resistors and more trailer lights soon based on customer service alone. LED reverse lights were great too
I got these because the original ones were a single bulb theses are much brighter. I also got a 7pole to 4 pole adapter my old one got squashed I went to 5 different places and no one had it checked on etrailer and there it was I ordered it and it was in my hands in less than a week as you see I taped it together so I never have to search for it. one other thing I got was a chrome led license plate light I had replaced mine with a original plate light from the trailer company twice and they keep breaking I think it was because they were black and you couldn't see it with this one being chrome it sticks out and being led it is much brighter and it cost less than the original one
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Connercattlecompany
1/24/2015
Installed the resistors and no more hyper-flash. The lights look and work well. I have ordered other products from etrailer and the customer service is great and I have recommended them to my friends and family.