Parts needed to Wire a Boat Trailer With Led Lights and a 4-Way Towed with a 2008 Toyota Tacoma  

Question:

Expert Reply:

To use the Optronics Trailer Lights, item # STL22CCRB, on your boat trailer you will need several parts. I will list them below.

2 each Optronics Trailer Lights, item # STL22CCRB
2 each Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB
2 each Right Angle 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights, item # A47PB
2 each Mount Bracket for 6-1/2 inch Oval Trailer Tail Light - Stainless Steel, item # 337LB1SS
1 each 35 ft. Wishbone 4-Way Trailer Wiring Harness with 42 inch Ground Wire, item # A35W42B
1 each Heavy-Duty, LED Trailer License-Plate Light w/ Mounting Bracket, 5 Diode, item # LPL55CB

If the trailer is over 80 inches wide you will also need the following parts.

2 each Sealed, Rectangular LED Trailer Side Marker Light, 14 Diodes - Amber, item # MCL49AB
1 each Sealed, Over 80 inch, LED ID Light Bar, 2 Wire, 3 Diode - Red, item # MCL70RB

Finally if you need a 7-Way to 4-Way adapter for your 2008 Toyota Tacoma I would recommend the Pollak 7 Pole to 4 Pole Connector Adapter, item # PK12716.

There are no converters or adapters needed to install these LED lights on the trailer. All of the above mentioned parts will work with your 2008 Toyota Tacoma trailer towing package. I have linked a trailer wiring video for you to review below.

expert reply by: Robert G

0