How Deep is Trailer Tail Light # STL22CCRB with the Wiring Pig Tail Plugged In

Updated 10/21/2013 | Published 10/19/2013

Products Featured in This Question

Tinted Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Clear Lens

(19)

$20.22

Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

(672)

$8.65

PVC Grommet for 6-1/2" Oval Trailer Tail Lights

(987)

$2.25

Question:

Hi, We ordered a new RV and I need a new tail light set to flush mount to the back of my RV up higher on sides where it can be seen above bikes as seen here on old RV. The back looks quite deep in the video so is there enough room for the 90 pig tail to return out the sides of the grommet?. thanks

asked by: Jon

Helpful Expert Reply:

You will want to do a little measuring to determine if there is space enough for light # STL22CCRB. From the face of the lens to the back of housing where the plug goes is 2-1/4 inches deep. With the plug installed it adds about an 1/8 of an inch. To be on the safe side you could measure back 2-1/2 inches to determine if there is room. I have linked a video review of this light for you.

The correct grommet is # a70gb and for a 90 degree wiring harness use # A47PB.

expert reply by: Michael H