Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Tired of replacing bulbs that burn out too soon? This rectangular LED trailer light uses 3 diodes that shine brighter while drawing less power—just 0.06 amps at 12.8 volts. The LEDs last up to 50 times longer than old-school incandescent bulbs, so you get dependable light every time you hook up the trailer. Plus, no brittle filaments or bulb swaps to worry about—just solid performance with every trip.
If your trailer ever sees the water, this light is ready for it. The housing and lens are sonically sealed into one waterproof unit, keeping out moisture that can ruin wiring or corrode contacts. Whether it’s a downpour on the road or full submersion at the ramp, the internal components stay protected so your lights keep working like new.
Visibility matters when towing, and this PC-rated light delivers a wide beam spread that covers 90 degrees to each side for a total of 180 degrees. That means it can be seen from both the front and sides when mounted properly, letting it double as a clearance and side marker light. With its red lens over bright white LEDs, it makes your trailer easier to spot day or night.
When space is limited or you want a clean install, this surface-mount design makes it easy. The light measures 2-1/2" long by 1-1/8" tall and just 5/8" thick, attaching flat against the surface without cutting holes. The mounting holes are spaced 1-3/4" center to center, and the single-wire setup grounds through the hardware—quick, neat, and straightforward to install.
Road debris and weather can be rough on lights, but this one’s made to last. Both the lens and housing are polycarbonate for impact resistance and long-term durability. Combined with a lifetime warranty on the LEDs, it’s a small light built for years of reliable performance wherever your trailer goes.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at the Optronics Mini Sealed LED Marker Clearance Light.This light functions as a marker and/or a clearance light for your trailer. It's a nice, small design. Very bright though. It's a really nice design. Sonically sealed, waterproof design when it comes with the housing, so everything is sealed. You don't have to worry about anything failing or not working if you submerse this in water.So, it's got that sonically sealed, submersible, waterproof design and it's a surface mount installation.
So, you've got a mount hole right here and a mount hole right here. Mounting hardware not included but it can be mounted horizontally or vertically and it is an LED system.LEDs make great replacements for incandescent lights. They last longer, they burn brighter, they're much more efficient. With LEDs, you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.This does feature a single wire design, for power and then it grounds through the mounting hardware. Again, mounting hardware not included.We have a nice, durable, red polycarbonate lens.
It is PC and P2 rated and it's SAE and Department of Transportation compliant.Now, I took a measurement from edge to edge going this direction and got a measurement of two and a half inches. Side to side going this direction is 1 1/16". Overall thickness is 5/8".We're going to go ahead and hook it up to power. That way, you can see what it looks like with power running to it and then we'll also turn off our overhead lights, so you can see it in a lower light setting.So, you can see here that the unit sends out a really nice, consistent signal. Plenty of light output.
We do have a multi-diode design, so that means that we have more than one LED on the unit. So, the multi-diode design really helps optimize the overall light output.Power draw at 12.8v, is 0.06 amps and Optronics puts a lifetime warranty on the LEDs.And that's going to do it for today's look at the Mini Sealed LED Marker Clearance Light.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
2/25/2025
Thanks for the photo as well as all the tips about install. Its nice knowing what other peoples first hand experience was. Thanks!