bing tracking image
Customer Service My Orders
  1. Camper Jacks
  2. Bulldog
  3. Landing Gear
  4. Side-Mount Jacks
  5. 5th Wheel Camper
  6. Manual Jack
Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs
Add to Cart
Bulldog

Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs

Part Number: BD182411
55 Reviews | 11 Questions
In Stock
$232.11
Retail:$306.26
You Save: $74.15
 Camper Jacks
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

bulldog camper jacks manual jack weld-on square - drop leg w/ non-spring return sidewind 26 inch lift 10 000 lbs
bulldog camper jacks landing gear side-mount manual jack bd182411
bulldog camper jacks 5th wheel manual jack square - drop leg w/ non-spring return sidewind 26 inch lift 10 000 lbs

Show All (3) Product Images

Show Fewer Product Images

Customer Photos

Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs customer photo
Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs customer photo

Show All (2) Customer Images

Show Fewer Customer Images

Videos

Show All (1) Videos

Show Fewer Videos

Need help with installation?
Locate installers near me
Heavy-duty, square, drop-leg jack has a side-facing plunger pin, an easy-to-access gearbox and 27-3/8" retracted height. Perfect for agricultural, construction, livestock or heavy-duty utility applications. Crank sold separately. 1-800-940-8924 to order Bulldog camper jacks part number BD182411 or order online at etrailer.com. Free expert support on all Bulldog products. Great prices and Fastest Shipping for Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (55)
  • Q & A (0)
  • Related Parts
  • Photos

Bulldog Camper Jacks - BD182411

  • Landing Gear
  • Side-Mount Jacks
  • 5th Wheel Camper
  • Manual Jack
  • 9001 - 10000 lbs
  • Bulldog
  • Weld-On
  • 26 Inch Lift
  • 1 Jack
  • Steel

Heavy-duty, square, drop-leg jack has a side-facing plunger pin, an easy-to-access gearbox and 27-3/8" retracted height. Perfect for agricultural, construction, livestock or heavy-duty utility applications. Crank sold separately.


Features:

  • 7-Gauge alloy steel offers superior strength and durability
  • Painted inner and outer tubes are weather resistant
  • Gearbox is easy to access for routine maintenance
    • Includes grease fitting
  • Drop leg with non-spring return increases overall extension for maximum adjustability
    • "Non-spring return" means user will need to physically lift jack at the foot to return to up position
    • Plunger pin positioned to the side
  • Direct-weld design
  • Jack can be paired with BD182400 or BD182404 for tandem applications
  • Sidewind crank sold separately
  • Standard footplate included


Specs:

  • Bracket height:
    • 27-3/8" Retracted
    • 39-7/8" Extended
  • Total lift: 26"
    • Travel: 12-1/2"
    • Drop leg: 13-1/2"
  • Tubing width: 4"
  • Lift capacity: 10,000 lbs
  • Static capacity: 12,000 lbs
  • Limited 5-year warranty


This jack is a companion to the Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 12-1/2" Lift (BD182400) and the Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 12-1/2" Lift (BD182404) and can be used in tandem operations with either. When used in tandem, a user-made connecting rod is required. Both jacks are designed so that their plunger pins and footplate handles are in easily accessible positions from either side of your trailer.



182411 Bulldog Heavy Duty Square Direct Weld Jack with Non-Spring Return Drop Leg, Sidewind, 12-1/2" Travel, 10,000 lbs - SWQ 180 DL-B




California residents: click here




Customers Who Purchased This Camper Jacks Also Bought...





Customer Satisfaction Score:

Ratings & Reviews

4.7

55 reviews
5 Stars
(46)
4 Stars
(6)
3 Stars
(1)
2 Stars
(0)
1 Star
(2)
Heavy-duty, square, drop-leg jack has a side-facing plunger pin, an easy-to-access gearbox and 27-3/8" retracted height. Perfect for agricultural, construction, livestock or heavy-duty utility applications. Crank sold separately.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Looks great and super fast shipping. Th anks.



by:

Great jacks !



by:

Good Product for the cost



by:

Get delivery time
Everything came assembled and in great condition!



by:

Exactly what we needed and delivered very quickly.



by:

Just want I order,took off the old jack and replace with the new one



by:

Product was exactly as shown and I received the items the next day.
Great Service



by:

Jack works great



by:

Very good service and fast . I will recommend this place for all your trailer parts . I will order everything that I will need for my trailers on the future


25
55
Show More Reviews

See what our Experts say about this Bulldog Camper Jacks

Do you have a question about this Camper Jack?
  • Replacement Electric Landing Gear for Horse Trailer
    Sorry to hear your system broke and there aren't replacement parts available for your horse trailer. The Bulldog Velocity Series Electric Landing Gear Jack - 24" Lift - 12,000 lbs # BD185400 is a good replacement for your discontinued and broken system. It will simply bolt right on to your trailer so it can utilize the 12V power you already have run. It is able to lift 12,000 lbs and lifts 20 inches in 60 seconds. Another great option for you is the Bulldog Square Jack - Drop Leg w/...
    view full answer...
  • Is There Motor Kit For Square Direct Weld Jack
    Hey Mark, There is not a motor kit for the Square Direct Weld Jack # e66FV. To use the Bulldog Powered-Drive Kit for Single-Speed Jacks # BD1824200100 you would need the Bulldog Square Jack # BD182411.
    view full answer...
  • Option for a Damaged Nut and Screw in a 10k Bulldog Landing Gear Jack
    I spoke to my contact at Bulldog and showed him the picture you submitted and he said that in March 2003 they upgraded the screw kit in all of the Bulldog jacks and that what you have has been discontinued. There are no screw and nut kits available that will replace what you have in your jack. Your only real solution at this point would be to remove your jack and install a new one like part # BD182411. Another option you would have would be to leave the outer leg installed on your trailer...
    view full answer...
    Image 1 for
  • Recommended Gooseneck Trailer Powered Landing Gear for Completely Weather Exposed System on Trailer
    When landing gear like # LG-1 is used on exposed trailers the electric component needs to be covered. Most of the time this is done with a custom sheet metal box as it doesn't take much just to shield the motor from the elements. The legs are powder coated and the gear box is aluminum, so you won't have issues with them being exposed, but the motor is another story. Your other option is to use a jack like the Bulldog Velocity Series Electric Landing Gear Jack # BD185400 or for a more...
    view full answer...
  • Can Bulldog Gooseneck Trailer Jack with 12k Capacity Be Converted to Electric Power Jack
    We do have the Bulldog powered drive kit part # BD1824200100 that is designed to convert Bulldog single speed jacks to powered jacks like the # BD182411 which it sounds like your dad has.
    view full answer...
  • Position of Footplate Handles and Plunger Pins on Landing Gear Trailer Jacks
    From what I have seen, there are 2 different configurations for landing gear jacks like # BD182815. First is like the jack you have referenced that has the foot release is perpendicular to the rod through the top center of the jack. The other configuration is like # BD182411, with the release parallel with the top rod. Jack # BD182411 is a companion to the Bulldog Square Jack # BD182400. The Bulldog Square Jack, # BD182404 and can be used in tandem operations with either of the first two...
    view full answer...
  • Recommendation to Replace Discontinued Bulldog Sidewind Trailer Jack
    Since the screw kit on your existing Bulldog jack is no longer available, you can either replace the entire jack with the Bulldog # BD182411 that you referenced or simply install the internal components of this jack on your existing unit. To do this, you will just need to purchase the Bulldog # BD182411 and simply remove its internal components to install them in your jack. If your current jack is welded to the trailer, this may be a good option. Otherwise it will be easier to just replace...
    view full answer...
  • 10k Gooseneck Trailer Jack Recommendation with Handle and Non-Spring Return
    I have a great solution for you. The Bulldog Jack part # BD182411 is a 10k jack that can be attached to your gooseneck trailer and does not have a spring return. To add a handle you'd then want the part # BD015181.
    view full answer...
  • Can a Powered Drive Kit be Added to a Trailers Landing Gear
    The Bulldog Powered-Drive Kit # BD1824200100 that you referenced is designed to fit Bulldog single speed landing gear jacks with a 12k capacity. If that is what you have on your trailer this would work well for you. There isn't a universal motor kit that will work with most landing gear sets. You will need to determine who made the jacks of your trailer so that you can see if there is a powered drive kit available for it. Otherwise you will need to upgrade your jacks to a Bulldog set...
    view full answer...
  • What is Bulldog Landing Gear Crank Shaft Diameter
    The shaft that a handle like part # BD8001090283 or a connecting shaft of the Bulldog Landing Gear Jack # BD182411 is 1/2 inch in diameter.
    view full answer...
  • Solution for Broken Bulldog Jack on 1999 Cherokee Trailer
    Due to the age of your jack the repair parts aren't available for it. I wish there was a solution I could recommend for you but Bulldog doesn't offer the parts for you jack anymore so you would have to replace the set. I spoke to my contact at Bulldog andhe said that in March 2003 they upgraded the screw kit in all of the Bulldog jacks and that what you have has been discontinued. There are no screw and nut kits available that will replace what you have in your jack. Your only real solution...
    view full answer...

Do you have a question about this Camper Jack?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






<