Replacement partial recess-mount roller helps to ensure that your RV's slide out rolls in and out smoothly. Includes single gray nylon conveyor roller and steel mounting bracket.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the Global Link Replacement Roller for RV Slide Outs. This is going to be a partially recessed mount, so we'll be able to have the one side sort of offset from the other, so however we need it to be, if we need it to sit a little bit further in to our mount, we can have it that way or vice versa.This is going to have a nylon roller, so it's soft enough that it shouldn't scratch anything but it should keep everything rolling nice and smoothly. Have our raw brackets on the other side, so these do not have any kind of paint there, so if you install these, you might want to paint them once they're in place to make sure that they don't rust out after a while. That'd be probably be something that'd be good to do.As far as the overall dimensions, our bracket, it's going to measure about 13 and 7/16 inches long.
It's actually a little bit longer than my ruler here. And then the actual roller portion. Is that will actually make contact so the high sides of that roller. It's about eight and a quarter inch long or roughly about eight and three quarter inches. We'll have a little bit of give there.
There's kind of a champering to that edge. The diameter of our roller is about an inch and a half wide, maybe about an inch and three quarters wide. And then it's going to be about the same width or the same height since it is that diameter.Our brackets each measure about two and three quarter inches wide by one and three quarter inches wide by one and three quarter inches long. Distance between the mounting holes center to center is about an inch and a quarter by about 5/8 of an inch. It does not come with any hardware so you will have to pick that up on your own or replace the...
Or reuse that existing hardware that you already had.That's going to do it for our look at the Global Link Replacement Roller for RV Slide Outs. Hope this video has been helpful in deciding if it's going to be the right part for you. If not, we have a lot of other options available here etrailer.com so definitely check those out. Thanks for watching.
Average Customer Rating: 4.4 out of 5 stars (9 Customer Reviews)
Replacement partial recess-mount roller helps to ensure that your RV's slide out rolls in and out smoothly. Includes single gray nylon conveyor roller and steel mounting bracket.
Exactly what I needed. Arrived in record time!
The ordering process went very well, with any questions I had answered right away.
Haven't installed yet but they look well built and will do the job they are intended.
Holding up well
Excellent product. Good quality. Fast delivery.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.