Detail K2 Rampage II Snowplow - 82" Wide x 19" Tall
Item # K2RAMP8219
Retail:$2,139.99
Our Price: $1,733.48
You Save: $406.51
Confirmed to Fit
1998 Chevrolet Tahoe
4 Wheel Drive
Rear Wheel Drive
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Need help with installation?
Locate installers near me- All Info
- Reviews (4)
- Q & A (0)
- Photos
1998 Chevrolet Tahoe - Detail K2 Rampage II Snowplow - 82" Wide x 19" Tall
- Detail K2
- Vehicle Snowplow
- Requires Custom Brackets
- Wireless Remote and In-Cab Switch
- Adjustable Blade - 3 Angles
- Steel Cutting Edge
- Steel Blade
Residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Remote-controlled electric winch lets you raise and lower plow from your cab.
Features:
- Heavy-duty, adjustable steel snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Custom-fit mounting brackets (sold separately) attach plow to the front of your truck or SUV
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Electric winch raises and lowers plow with sturdy, nylon strap
- Operate from the comfort of your vehicle with the in-cab switch or the included wireless remote control
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top directs snow down and away from your windshield
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Cross member allows you to quickly attach and remove the snowplow
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
Specs:
- Blade dimensions: 82" wide x 19" tall
- Weight: 265 lbs
- Winch lift capacity: 1,500 lbs
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- 1-Year limited warranty
Note: Due to the size of this item, it ships via truck freight and only to the contiguous United States.
RAMP8219 Detail K2 Rampage Series II Custom-Mount Snowplow - 82" Wide x 19" Tall Blade
Customer Reviews
Detail K2 Rampage II Snowplow - 82" Wide x 19" Tall - K2RAMP8219
Average Customer Rating: 2.5 out of 5 stars (4 Customer Reviews)
Residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Remote-controlled electric winch lets you raise and lower plow from your cab.by: Lily12/27/2017
We purchased the DK2 Rampage II snowplow in Nov.2015, and started using it in Oct. 2016. Now it's been a little over a year, and the snow plow stopped working. After careful inspection, we found out the winch installed in the plow is an used+defective one (inside screws and rubber washer are not in place). It would be great if all parts are new and without defect.
What's worse, we tried to call the 1-800 on the instruction manual for ordering a replacement part, but never got any human being to answer the phone after trying for a week. Finally we found the phone # of the seller - etrailer from my old email folder.
It would be more convenient if you could have placed your phone # on the manual so that customers can easily contact you in case of any problem.
Thank you for listening.
by: Christopher10/28/2017
2003 Nissan Pathfinder
I bought this K2RAMP8219 snow plow to take care of small properties in my neighborhood. Had a mechanic install the electrical under the hood and I put together the parts as described in the instructions. Everything seemed fine. Hooked up the plow to the vehicle and it lifted fine and lowered fine. Soon as we got our first small snowfall I try to plow my back driveway and it wasn't enough snow to see how will the plow worked so I tried to remove the plow from the hitch and couldn't get the plow off. I tried moving the vehicle to all sorts of areas on my driveway and still would not unhook. Had to Dremel the plow bracket of the hitch . Then tried to get it back on and it wouldn't go back on. Called technical support and told them of this problem and they sent a new hitch and that didn't work either. Now the snow plow sits in my backyard and can't do anything with it.
by: Joseph08/28/2018
2005 Chevrolet TrailBlazer
Mounting bracket did not fit needed to contact owner several times to send out multiple mounts until we found one that fit then the bolts were too short contacted owner again got several bolts sent out until we found one that worked my personal opinion buy a real plow with a standard mounting kit these k2 plows are cheap and not universal after 10 uses plow started rusting in multipl spots not quality at all
by: Lee12/22/2018
Easy to assemble. Works just like it is advertised!
4
4
See what our Experts say about this Detail K2 Snow Plow
- Will Detail K2 Snowplow And Mounting Brackets Fit 1983 Toyota 4X4 PickupThe Detail K2 Rampage II Snowplow, part # K2RAMP8219, and Custom Mounting Brackets, part # K285100 are a fit for your 1983 Toyota pickup. This residential plow measures 82-inches wide x 19-inches tall features an adjustable 3-position blade and an electric winch that raises and lowers the blade. The mounting brackets are designed to bolt to your truck frame and no drilling is required for installation.
view full answer... - Does Detail K2 Summit Plow Fit 1987 Nissan Truck without ModificationThe K2 plow setup you referenced for your 1987 Nissan Pickup plow K2SUMM8826 and # K286610 is a confirmed no-drill, no-weld option that would work great. It bolts on. It bolt directly to the frame and you'd be good.
view full answer... - Detail K2 Snow Plow Mount Fit for 1995 Dodge Dakota 4x4 Club CabAccording to the manufacturer, Detail K2, for your 1995 Dodge Dakota 4x4 club cab you'll need the # K284125 bracket kit you'd referred to. This bracket kit is compatible with the # K2RAMP8219 Rampage II, # K2STOR8422 Storm II and # K2SUMM8826) Summit II plows.
view full answer... - Crossbar to Install Detail K2 Snowplow on 1988 Jeep WranglerYes, the crossbar you see pictured in the install instructions for the brackets # K284115 is included with the plow, # K2RAMP8219.
view full answer... - Parts Needed to Mount Snow Plow to 2010 Ram 3500The personal snowplows from SnowBear simply mount to a hitch receiver so to add one to your 2010 Ram 3500 you'll need the Curt # C31065. If you have the Winter Wolf edition that requires vehicle-specific mounting brackets then we'll either need to find you a different setup or you'll have to have a shop fabricate some mounts as SnowBear doesn't have any custom mounts for a 3500 Ram pickup. For the personal snowplow from SnowBear you'll need that Curt Front Hitch # C31065 and SnowBear...
view full answer... - Recommended In-Cab Controlled Snow Plow Setup for a 2008 Honda RidgelineWe have several snow plows that can be adjusted from inside the cab of your 2008 Honda Ridgeline. For this you can choose from the SnowBear Personal Snowplow part # SB324-080, or the Detail K2 Rampage II Snowplow, part # K2RAMP8219. The best snow plow of these three options is the SnowBear Personal Snowplow. Unlike the other two choices, this snow plow sits close enough to vehicle to reduce leverage and strain on the plow, mounts, and vehicle. The in-cab toggle switch lets you raise and...
view full answer...
- Snow Plow and Mount Kit Recommendation for 2004 Toyota 4Runner Yes, the snow plow kit part # K2RAMP8219 can be used on your 2004 Toyota 4Runner. All you need is the install kit part # K285122 which is confirmed as a fit for your 2004 Toyota 4Runner.
view full answer... - Will K2 Rampage Snow Plow Work With a 2004 Jeep Wrangler?The Detail K2 Rampage II Snowplow # K2RAMP8219 will fit a 4-wheel drive 2004 Jeep Wrangler. When assembled, the K2 Rampage is 265 lbs, and as long as adding that amount of weight will not exceed your gross axle weight rating (GAWR) then it will not be an issue. To find your Wrangler's GAWR, just locate the "Tire and Loading Information" placard in your Jeep, which according to the owner's manual is located on the lower driver's side instrument panel. The snow plow would be mounted using...
view full answer...
- Parts Needed to Install Snow Plow on 2000 Honda PassportThe plow kit you referenced of # K286109 for the bracket kit and the # K2RAMP8219 for the plow is exactly what you would need to allow your 2000 Honda Passport to plow your driveway. The install of the hardware kit and plow would not be too difficult. As long as you have access to basic tools and have basic mechanical skills it would be no problem at all.
view full answer... - Recommended Snowplow for a 2011 Jeep Compass with 4 Wheel DriveAs long as your 2011 Jeep Compass is 4 wheel drive then yes, you can install a snowplow. If your Jeep is 2 wheel drive then we do not have a snowplow mounting kit for you at this time. For a snowplow and mounting kit that may work for you, I recommend using the Detail K2 Rampage II Snowplow part # K2RAMP8219 with the Custom Mounting Brackets for Detail K2 Snowplows part # K284200. The snowplow has an 82" wide blade with 5 adjustable positions. The remote controlled electric winch will...
view full answer... - Dual-Receiver Hitch for 2004 GMC Sierra 2500 with 6-1/2-Foot BedFor your 2004 GMC Sierra 2500 with 6-1/2-foot bed we do have a dual-receiver hitch option from TorkLift, part # TLC1204, which has two 2-inch receiver openings. This allows use of a hitch-mount carrier, such as a bike rack, while towing. The Sierra's factory hitch needs to be removed to install the TorkLift. TorkLift makes the only dual hitch we currently offer for your truck and as you noted it features excellent build quality including reinforced pin holes. Another option is to install...
view full answer... - 1984 Dodge Ramcharger Prospector Mounting Brackets for SnowplowI believe you're looking for the Custom Mounting Brackets for Detail K2 Snowplows # K284303 which fits a '74-'93 Ramcharger. I'm not entirely sure what all is included with the W-159 Prospector setup that you have, but this kit fits the base model so if nothing changed for the front of the frame and body you'll be able to install this with no issues. If something did change then you'll need to have something fabricate as Detail K2 doesn't have a variety of options for the older pickups. This...
view full answer... - Detail K2 Custom Mount Brackets for 2006 Honda Ridgeline 4WDFor your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets # K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo to assist. This mount is only a confirmed fit for the 4WD Ridgeline. If you want to use the custom mount, you will need to update your plow to the linked options which are confirmed to work with that mount on your truck: Rampage II # K2RAMP8219 Storm...
view full answer...
- K2 Plow Fit Availability for a 1998 Range RoverYes, the plow kit part numbers # K2RAMP8219 with the mounting bracket part # K289010 are a confirmed fit for your 1998 Land Rover Range Rover Discovery. Basically the plow can fit any vehicle that there is install hardware for. And the part # K289010 is a fit for your Range Rover so it would be a great option.
view full answer... - Can Detail K2 Rampage II Plow be Used with 1988 Ford Bronco IIYes, you can use the Detail K2 Rampage II Snow Plow part # K2RAMP8219 on your 1988 Ford Bronco II with the correct custom install bracket kit part # K281100.
view full answer... - Snow Plow Mount Recommendation for 1991 Toyota 4x4 For Detail K2 Rampage PlowYes, to use the K2 snow plow part # K2RAMP8219 that you referenced on your 1992 Toyota Truck 4x4 you would need the plow install hardware part # K285105. Prices are available at links below.
view full answer... - Snow Plow Solution for 1997 Toyota 4RunnerWe have snow plow solutions for your 1997 Toyota 4Runner but they use frame brackets instead of front hitches like with the bracket kit part # K285120 which would allow you to use the plow part # K2RAMP8219.
view full answer... - What Snow Plow do You Recommend for My 2012 Jeep Compass?Apart from the size of the plows, another economic factor is whether the plow is electric actuator driven like the Detail K2 Rampage II Elite Snowplow - Custom Mount # K2RAMP8219ELT or electric winch driven like the Detail K2 Rampage II Snowplow # K2RAMP8219. The actuator-driven capability is generally easier to maintain and generally lasts about twice as long as a winch-driven plow. If you want a more economical option that still includes an actuator mechanism, I recommend the Detail...
view full answer... - Recommended Snow Plow and Mounting Brackets for 1997 Ford F-150The snow plow I suggest for your 1997 Ford F-150 is the Detail K2 Rampage II # K2RAMP8219. It uses a remote controlled electric winch to adjust the plow. It also has springs so the plow will lean forward when it comes into contact with an unseen object. This will protect the plow and your truck. To mount the plow you'll need # K281512 if your truck is a 4-wheel drive model or # K281511 if it's 2-wheel drive.
view full answer... - What Does Replacement Electric Winch K2EW8020 Fit?The Replacement Electric Winch for Detail K2 Snowplows # K2EW8020 is a direct fit as a replacement for a number of Detail K2 Snowplows. It is designed to be mounted with the Avalanche # K2AVAL8219 and # K2AVAL8422, Rampage K2RASP8219 and Rampage II # K2RAMP8219, Storm K2STSP8422 and Storm II # K2STOR8422 as well as the Summit K2SUSP8826 and Summit II K2SUMM8826. This replacement includes the cab-mounted switch which allows you to use your K2 from inside your truck.
view full answer... - Snowplow and Mounting Hardware for 1992 Dodge RamThe plows we offer like the part # K2RAMP8219 that you referenced will fit your 1992 Dodge Ram but will require the install hardware kit part # K284303. Your brush guard will need to come off as well since the mounting hardware of it would occupy the same area as the plow install hardware.
view full answer...
- Detail K2 Snowplow Mounts for 2003 Dodge Ram 2500We do have a bracket kit that is a fit for your 2003 Dodge Ram 2500, part # K284312. According to K2, the # K284219 you'd looked at isn't a fit for your truck. This bracket kit is a fit for Fits Rampage II (K2RAMP8219), Storm II (K2STOR8422), and Summit II (K2SUMM8826) plows.
view full answer... - Recommended Custom Mounting Brackets for a 2010 Ford F-150 Using a Detail K2 SnowplowWelcome back! Yes, we do have a front mount kit that will get the Detail K2 Rampage II Snowplow item # K2RAMP8219 set up on your 2010 Ford F-150. It is the Custom Mounting Brackets for Detail K2 Snowplows item # K281521.
view full answer... - Can K2 Detail Snow Plow Mount to 1993 Jeep Wrangler with Above Bumper Mounted WinchSince your winch install hardware is above the bumper you can use the K2 Snow Plow # K2SUMM8826 that you referenced as the install hardware attaches below the bumper and to the frame. All you'd need then is the correct install hardware kit # K284115 and you'd be set.
view full answer...
Do you have a question about this Snow Plow?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Written by:
Shelly K
Updated by:
Wilson B
Updated by:
Mark S
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.