Video Transcript for Review of Hellwig Anti-Sway Bars - Adjustable Rear Anti-Sway Bar 7/8 Inch - HE58TR

Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this Hellwig Adjustable Rear Anti-Sway Bar. Now, this anti-sway bar has been designed specifically for your 2021 Ford Bronco. And on custom fit parts such as this anti-sway bar, I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Just enter the year, make, and model of your vehicle, and our fit guide will confirm if this will work for you or if we have something comparable that will work for you. Now, this bar is going to mount to your rear axle and frame, and it is designed to help minimize side-to-side movement, improving the overall stability of your Bronco.

This system will let you execute turns and quick maneuvers with confidence. It's also gonna give you a level ride, even on irregular surfaces. This is also going to help reduce driver fatigue by minimizing the effort required to keep your Bronco in line. And this is also going to help reduce the effects of shifting cargo, passing motorists, and crosswinds. Now, this anti-sway bar does for side-to-side movement what a good pair of shocks does for up and down motion, giving you a marked improvement in the overall stability of your Bronco.

I hope you can notice here along the sides, we do have three adjustment holes on either side. And this is gonna help you, or give you the ability rather, to choose the degree of stiffness that's gonna work best for you. So the holes that are closest to the bar are going to be the stiffest setting, and the holes that are furthest from the bar are gonna be the softest, so you have that range of adjustability. The bushings here are made of polyurethane instead of the standard rubber variety for a longer lasting system. They're durable and they're resistant to damage caused by oil, gasoline, and ozone.

So less wear means less give in the system and better overall support. The diameter of this bar is 7/8 of an inch. It is made here in the USA of solid heat-treated chromoly steel, giving you that superior strength. And I would like to zoom in overhead here just to give you a view of this finish. This bar does feature a silver vein hammer tone finish, which is not only gonna give you protection from corrosion, but the finish actually has little divots in it.

So when you grease your polyurethane bushings and you slide them onto this bar, this finish is gonna do a great job of holding that grease in your bushings to prevent them from squeaking. So this system is going to include everything that you see laid out here on my table before me. You're going to get zinc-plated mounting hardware, the brackets here for our bushings, and some of the other hardware here have a black powder coat finish to also help fight off corrosion. Instructions are also included to guide you through the installation process. And this does have a limited lifetime warranty from Hellwig. Well, that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.