Mounting Pins for Maxtrax Xtreme Recovery Boards - 1-9/16" Long Bolt - Qty 4

Video Transcript for A Closer Look at the Mounting Pins for Maxtrax Xtreme Recovery Boards

Hi everybody. Andy here with etrailer.com. Let's take a real quick look at these mounting pins for your MAXTRAX Xtreme recovery boards. These mounting pins are going to let you secure two or four MAXTRAX Xtreme recovery boards onto your crossbars or platform rack. These are also gonna be perfect to use with the compatible recovery board brackets that mount to your roof rack. And the quick-release pins are going to insert through the pin holes on the boards and then bolt onto your overlanding system.

And as you can see, each bolt is going to come with an M10 nut and washer. So, I have that hardware on each of these bolts. And just to give you a length of the bolt itself, lining that up there, as you can see, we're sitting right at 1 9/16 inches long. Let me go ahead and replace the hardware before I lose it. And so this is going to be very simple to install, very simple to use, that you're gonna, like I said, be able to mount just two Xtreme recovery boards, and then you'll just turn that knuckle to lock it into place.

And then, if you secure up to four, you'll just turn the top knuckle just like that and secure it in place. And as you can see, we do have a hole here on the pins. It's going to let you attach a small padlock. Of course, that padlock is sold separately, but you can find options on the related product section on this product page. Now, these pins are constructed of nylon and stainless steel, so these are gonna be very strong and very durable, very long-lasting for you.

And this includes everything that you see here on the table before me. Well, that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.

.