Product Experts Available Now!
Call 1-800-940-8924
Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle
(1535 reviews)
Price: $732.99
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle
In Stock
$732.99
Retail:$1,010.99
You Save: $278.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (1535)
- Q & A (0)
- Photos
Air Lift Vehicle Suspension
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- 5,000-lb Load Support: Levels your truck under heavy cargo for safer towing and hauling.
- Built-In Jounce Bumpers: Keep control and ride comfort even if air pressure drops to zero.
- Adjustable 5–100 psi Air Pressure: Fine-tune stiffness to reduce squat, sway, and bounce.
- Protects Suspension Components: Roll plates and nylon endcaps prevent damage and corrosion.
- Easy DIY Setup: Bolt-on brackets, air lines, and valves make installation simple with basic tools.
Features to know about
Keep Your Truck Level and Confident: Up to 5,000 lbs of Load-Leveling Support
Heavy loads can make any truck squat, throwing off steering and braking. The Air Lift LoadLifter 5000 Ultimate air springs add up to 5,000 lbs of load-leveling capacity to keep your stance level and stable. Adjustable from 5 psi to 100 psi, the air springs balance weight front to back or side to side, reducing strain on your suspension and keeping your headlights aimed right where they should be.
Ride Smooth Even on Rough Roads: Internal Jounce Bumpers Built In
When road bumps or dips hit hard, the built-in urethane jounce bumpers inside each air spring step in to absorb shock and prevent bottoming out. They engage progressively—the more weight you carry, the stiffer they get—so your ride stays smooth whether you're loaded or empty. And if air pressure ever drops, those internal jounces act as a fail-safe to keep you rolling without sagging.
Strong Where It Counts: Durable Construction for Long Service Life
Each LoadLifter 5000 Ultimate spring uses 2-ply, fabric-reinforced rubber for strength you can count on. Endcaps are made from high-strength Zytel nylon that’s lighter and more corrosion-resistant than steel. Air Lift’s exclusive roll plates protect the bags from damage and expand their surface area for a better ride at lower pressures. The urethane jounce inserts need no maintenance and hold up in both hot and cold weather.
Set It Up Once and Go: Simple Installation with Included Hardware
Everything needed for installation is in the box—mounting brackets, hardware, air lines, and manual inflation valves that can be tucked neatly on the bumper for easy access. Just mount the springs, air them up, and you’re ready to work or tow. Add an optional Air Lift compressor system later if you want in-cab or smartphone control over air pressure.
Confidence Backed by Coverage: Lifetime Warranty Support
These LoadLifter 5000 Ultimate air springs come with a lifetime warranty and a 60-day satisfaction guarantee. That means you can bolt them on, load up, and drive knowing your suspension support is built to last as long as your truck does.
Specs
Weight and Capacity
- Load-leveling capacity: up to 5,000 lbs
Pressure
- Adjustable air pressure: 5 psi - 100 psi
Warranty
- Lifetime warranty
- 60-Day satisfaction guarantee
88341 AirLift Load Lifter 5000 Ultimate Air Springs with Internal Jounce Bumpers - Rear Axle
Item # AL88341
Installation Details
This Product Fits The Following Vehicles
- 2020 - 2027 GMC Sierra 2500 4 Wheel Drive
- 2020 - 2027 GMC Sierra 3500 Pickup - 4 Wheel Drive
- 2020 - 2027 Chevrolet Silverado 2500 4 Wheel Drive
- 2020 - 2027 Chevrolet Silverado 3500 Pickup - 4 Wheel Drive
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Arrived Damaged
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.7
1535 reviews
by:
Woody Keitt
09/16/2025
I purchased a set of these airbags for my old truck from etrailer and ran them for 17 years pulling a 42’ fifth wheel without any problems. So there was no hesitation for me to order the same for my new truck. I looked up everything I needed up on the etrailers site and called Josh at etrailer and he verified what I needed and got it on order. Also he verified my onboard compressor would work with the new air bags. Everything was received in a few days as usual. The airbags came with very good instructions and were no trouble to install and installation went quickly and have been preforming great. etrailer is always my go too for my truck and camper parts, also the bonus is if you have any problems or questions you can call etrailer and talk to a real person and get any problems corrected. etrailer for the win.
by:
David
08/13/2026
2026
GMC
Sierra 2500
Delivery was unbelievably fast! I caused a payment hiccup they straightened out for me pretty much immediately, and graciously. I installed the air bags today, and between the supplied directions and their videos I didn’t have any problems
by:
Paul
04/07/2026
chevrolet
Silverado
It took a little longer to get and it took most of the day to install on my 2026 Silverado 2500 HD. But it was the 1st time putting air bags on a truck. Everything in the kit seems heavy duty and should last a very long time. I have not pulled the trailer yet but will this weekend, 700 miles or so. I did have contact with 2 customer service representative from etrailer. They were both very knowledgeable and helpful and I was glad that they worked for each trailer. They both did a great job. I would give a five star, but it’s too soon.
by:
James
11/29/2024
2022
GMC
Sierra 3500
Putting the air bags together and installing them on the truck was pretty easy, I did take the spare tire and exhaust heat shield out of the way. Running the tubing and connecting the bags took no time at all and didn't leak any. I would give 5 stars but a couple pieces were not in the box, the customer service at etrailer did get the parts sent to me before i had a trip with my trailer scheduled. 5 stars for customer service.
by:
Thomas
04/06/2026
2022
Ram
2500
So far works well, Only one trip with my 2500 duramax pulling a 5th wheel camper.works well with the air lift wireless compressor,
by:
Brad H
04/17/2020
2020
GMC
Sierra 2500
2020 GMC 2500. Did LoadLifter 5000 and EZ compressor set up.
The exhaust runs down the passenger side and the fuse box with switched power signal is on the driver side so for multiple reasons I wanted to mount the compressor on the driver side. I couldn’t do inside the rail as I would have preferred given all the DEF and fuel tanks. Above the frame rail running down most of the truck are 2 solid brake lines that would interfere with the U bolt to mount the EZ compressor assembly vertically as I originally intended. I did find a space I could fit it in without interference with those lines but it hung low and was more visible and exposed that I preferred. I did find though 2 existing holes in the frame that the U bolt fit in perfectly for a horizontal mount without interference and much higher and better tucked up under the truck for a super clean mount. The U bolt threads didn’t run deep enough for a single frame wall mount so for $3, I bought steel spacers and after painting them inside and out for corrosion resistance, I mounted very easily for a “customized” no drill $3 option. There is also a large wire harness that runs from that spot all the way to the battery so it was easy to run my wires along side and attach to that all the way up. Very happy with that location as air lines were easy to run and plenty long from there as well and put in 2 service loops just in case.
I ended up running the pink wire to the fuse box and bought some fuse splicer wires Iike in the etrailer video. Hesitated to trim the fuse box on my brand new truck so the lid would close and like to keep mods as unnoticeable as possible so wanted to see how well it performed just based on motion and waking with the remote or app. I’ll wire it later if needed but just left it tucked for now.
I also picked up some Daystar airbag cradles and mounted those to bottom bracket using the existing center hole in the bracket. Just picked up longer SS countersink bolts and hex nuts. No drill but I did have to trim the bolts off for a perfect length. Now the stretch of the airbag doesn’t limit suspension travel down and I don’t have to worry about bag damage when on a service lift down the road. Obviously when under its own weight or loaded the bags fit snugly and are well supported by the cradles. Outside of the time to buy the additional hardware that took zero additional time and is much preferred as now I can take it to the shop without worry. The only draw back is they are 6” cradles and I would have preferred the 7500# air bags for extra duty but they are 7”. I run the same setup on my 2002 Excursion and knew for sure I wanted the cradles so stayed with 5000# bags. I’m not loading a skid steer in the bed so really that should be plenty.
Love the AirLift system and have ran them for years. Glad to have them installed on my new truck and look forward to the next load.
Put pics of bags with suspension full droop, and then under normal weight. Also pics of the mounting location and final mounted compressor set up and look from side of truck.
Would recommend this set up for anyone who uses their truck like a truck and would recommend these minor mods on the install.
The exhaust runs down the passenger side and the fuse box with switched power signal is on the driver side so for multiple reasons I wanted to mount the compressor on the driver side. I couldn’t do inside the rail as I would have preferred given all the DEF and fuel tanks. Above the frame rail running down most of the truck are 2 solid brake lines that would interfere with the U bolt to mount the EZ compressor assembly vertically as I originally intended. I did find a space I could fit it in without interference with those lines but it hung low and was more visible and exposed that I preferred. I did find though 2 existing holes in the frame that the U bolt fit in perfectly for a horizontal mount without interference and much higher and better tucked up under the truck for a super clean mount. The U bolt threads didn’t run deep enough for a single frame wall mount so for $3, I bought steel spacers and after painting them inside and out for corrosion resistance, I mounted very easily for a “customized” no drill $3 option. There is also a large wire harness that runs from that spot all the way to the battery so it was easy to run my wires along side and attach to that all the way up. Very happy with that location as air lines were easy to run and plenty long from there as well and put in 2 service loops just in case.
I ended up running the pink wire to the fuse box and bought some fuse splicer wires Iike in the etrailer video. Hesitated to trim the fuse box on my brand new truck so the lid would close and like to keep mods as unnoticeable as possible so wanted to see how well it performed just based on motion and waking with the remote or app. I’ll wire it later if needed but just left it tucked for now.
I also picked up some Daystar airbag cradles and mounted those to bottom bracket using the existing center hole in the bracket. Just picked up longer SS countersink bolts and hex nuts. No drill but I did have to trim the bolts off for a perfect length. Now the stretch of the airbag doesn’t limit suspension travel down and I don’t have to worry about bag damage when on a service lift down the road. Obviously when under its own weight or loaded the bags fit snugly and are well supported by the cradles. Outside of the time to buy the additional hardware that took zero additional time and is much preferred as now I can take it to the shop without worry. The only draw back is they are 6” cradles and I would have preferred the 7500# air bags for extra duty but they are 7”. I run the same setup on my 2002 Excursion and knew for sure I wanted the cradles so stayed with 5000# bags. I’m not loading a skid steer in the bed so really that should be plenty.
Love the AirLift system and have ran them for years. Glad to have them installed on my new truck and look forward to the next load.
Put pics of bags with suspension full droop, and then under normal weight. Also pics of the mounting location and final mounted compressor set up and look from side of truck.
Would recommend this set up for anyone who uses their truck like a truck and would recommend these minor mods on the install.
by:
Kelly
09/04/2026
Perfect As expected!
by:
Jamie
03/31/2024
Adds the leveling needed when I tow our 5th wheel. I have used these before on another brand of truck and would highly recommend them! Etrailer is always a pleasure to do business with. Shipping is always on time if not before I expect it.
Jamie
4/6/2025
Still working great! I would highly recommend Airlift products.
by:
Bob H.
04/07/2023
Good directions, install went well. Took roughly 2 hours to install. I did add some wire loom to the spots I was worried about rubbing on the air line. I would buy again. Now we will see how well they hold up. 4-07-23
by:
Kenneth
06/30/2025
I'm sure the product is great (my son has these and that's why I wanted to see if they would fit) unfortunately these would nit fit with the
Curt Custom Fifth Wheel Installation Kit for Chevy/GMC Truck C16429-204
Courtney was of great help, she deserves as raise.
Curt Custom Fifth Wheel Installation Kit for Chevy/GMC Truck C16429-204
Courtney was of great help, she deserves as raise.
by:
Gus
04/07/2025
2023
GMC
Sierra 2500
The quality of these is average and perhaps below average, so I went with three stars. The tapped hole where you mount the brake line bracket was not cleanly done and had to be fought to get the bolt started (I don't have a tap/die set to fix it myself and shouldn't have to). The airline connectors are not very robust and were finnicky to get them not to leak (not the threading, the push to connect piece) even with clean square cuts. The instructions for orienting the bracketry correctly were not clear to me (maybe ok for others?). I'll try a different brand next time, but I'm not pulling these off now that they're installed. etrailer put a shipping label over the UPC code needed for the mail in rebate, but I hope Air Lift will accept it anyway. Overall, not a smooth experience for the money paid.
by:
Blake
06/18/2025
2021
Chevrolet
Silverado 3500
Very easy to install and helps leveling out the pickup. Provides a smoother ride over bumpy roads.
by:
Kristin
05/20/2025
The installation was pretty easier and the air bags are working fine.
by:
Shaun
11/10/2025
Ram
3500
Easy install. Works flawlessly. Installed on a 2025 GMC Sierra 3500.
by:
Anthony
12/24/2024
2022
GMC
Sierra 3500
Airbags installed well. No problems with the instructions. Check clearance on the left spring mount at Fuel tank, it can get tight depending on size of the tank. May take some adjusting.
by:
Mike
11/21/2023
Ram
2500
The airlift 5000 fits my needs perfectly. We tow a 35’ fifth wheel camper with a GMC 2500. I air them up to 75lbs and the ride is perfect. Highly recommended
by:
Nathan
07/07/2023
As most of my heavier item packages have been from etrailer, this one was beat up when it arrived. Luckily it wasn’t damaged too bad and no parts were missing. I appreciated the videos showing installs on my type of truck. The product is good and installed as the videos indicates… It’d be nice if they gave a couple small brackets and maybe a 90 or two for the air lines. It was hard to find a spot without making a bracket.
by:
Shane E
01/25/2021
Pretty straight forward install, if you get the chassis lifted up enough. You really need more of the heat shield covering for the air lines, than what is included. That’s probably my only complaint so far.
by:
Tim
01/10/2021
Ram
3500
Installed on a 2021 GMC 3500 HD. Worked great after figuring out the placement of the Airbags. A install video on a newer truck would be helpful.Thanks again E-Trailer 6 stars on their customer service !
by:
John
08/04/2025
Very simple kit, though some difficulty reaching hardware for torquing. Works great!
by:
Jason
01/14/2022
2020
GMC
Sierra 2500
Haven’t installed yet but shipping was fast and arrived earlier than expected. Look forward to installing the air bags and air compressor. Keep up the good work etrailer
by:
Steve
12/03/2023
2022
GMC
Sierra 2500
Quality product, need to push all of the air out of the bags for install or you will fight them..pretty straight forward instructions, pretty simple install.
by:
Charles
01/23/2024
this is the second airlift product bought in 2 weeks. i had a set put on my work truck first. i liked so much that i bought a set for my personal truck
by:
Lisa
09/27/2022
Excellent service. Easy to orde, free shipping and quick delivery.
John
9/28/2023
Excellent product. This is my 2nd Air Lift 5000 Ultimate set of air bags. Used for towing 14K 5th wheel camper. 3200 lb pin weight. Tow vehicle is a Chevy 3500 HD. Couldn’t ask for more.
by:
Jeff
07/19/2024
Exceptional customer service. Bought these for 30% less local performance shop estimated. Received follow-up calls and human advice when making the purchase and it made it much more simple than driving down to a performance shop. Looking forward to seeing how they work.
25
1535
true
Show More Reviews
See what our Experts say about this Air Lift Vehicle Suspension
- Best Air Bag Kit For 2021 GMC 2500 Pulling 34' Grand Design Travel TrailerHey Paul, welcome back. You are on the right track here. For your 2021 GMC 2500 pulling a Grand Design travel trailer, the Air Lift 5000 kit will be more than sufficient to level your ride and provide the stability you are looking for. I typically only ever recommend the 7500 kits for trucks with a constant heavy load in the bed like a truck bed camper or salt spreader. For typical bumper-pull towing the 5000 will absolutely give you the support you are needing. That said, here is the...
view full answer... - Which Air Lift Air Bags and Compressor Are Best for a 2025 GMC Sierra 3500 With the OEM Prep?Hello Nathan, Welcome to etrailer! I'm glad you found us. For your setup, I recommend the Air Lift LoadLifter 5000 Air Helper Springs # AL57341. I actually like this system a little better than the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88341 you were looking at. The Ultimate version includes internal jounce bumpers, which are a nice feature if you're carrying heavy loads all the time. Since you're primarily towing a fifth wheel, though,...
view full answer... - Recommended 7,500 lbs Air Bags for a 2024 Chevy Silverado 2500 Hey Stephen, thanks for the information! For your 2024 Chevy Silverado 2500 High Country, I recommend the 7,500 lbs Air Lift LoadLifter Air Helper Springs item # AL57541. With that much pin weight you're going to want the extra capacity the 7,500 lbs kit offers over the 5,000 lbs item # AL88341 option. You'll get the extra support but not have to worry about it being overrated for your truck. For a Bluetooth controlled onboard air compressor, I recommend the Air Lift WirelessAIR Compressor...
view full answer... - Air Lift 5000 Ultimate Plus Compatibility With Factory In Bed Hitch/Puck System on 2023 Chevy 2500HDYes, the Air Lift LoadLifter 5000 Ultimate Air Springs # AL88341 will fit with the factory in bed prep/puck system on your 2023 Chevrolet Silverado 2500HD. These springs include an internal jounce bumper which will help to protect the air spring and reduce road shock and bounce while towing. I recommend using the Air Lift WirelessAIR Compressor System # AL58WQ to control the air pressure in the springs. This will allow you to wirelessly change the air pressure from your smartphone using...
view full answer... - What Are Good Airbags For My 2023 Chevy Silverado 3500?Hey Zoom, We do have a set of airbags for your 23 Chevy. I recommend the Air Lift LoadLifter 5000 # AL88341. This is a no drill, bolt on installation and offers a 5,000lb load leveling capacity. Now that is just the general airbag I found. Some things may determine if they will fit or not so let me know if you are towing any 5th wheel or gooseneck trailer. Or if your vehicle is the cab and chassis model, this could change which kit is for you. Are you towing or do you have a truck bed...
view full answer... - Air Bag Suspension Enhancement Kit that Fits 2024 GMC Sierra 2500 AT4XHey Matthew, we have the Firestone kit part # F2709 which fits your 2024 GMC Sierra 2500 AT4X. We have confirmed this with Firestone as a fit.
view full answer... - Will Air Lift Air Bags Work on a 2021 GMC Sierra 2500 w/ a B&W Turnoverball Gooseneck Hitch? Hey Greg, they're not going to work together. The clamps that attach the Air Lift Air Springs like item # AL88341 hang over your frame right where the brackets for the B&W Turnoverball Gooseneck Hitch item # BWGNRK1020 sit. You'll want to go with the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item # F2709 for your 2021 GMC Sierra 2500. These install beneath the frame where your bump stop mounts sit so there's no compatibility issues. They're slightly more expensive...
view full answer... - Recommended Heavy Duty Air Bags for a 2025 GMC Sierra 3500Hey Karl, congrats on the new truck. I am sorry but you can not buy just the brackets for the Air Lift LoadLifter Air Helper Springs item # AL88341 or the Firestone Ride-Rite Air Helper Springs item # F2613. Additionally, I checked and even if you could buy the brackets the air bags are not the same on your 2025 Sierra 3500 as the ones in the kits for the 2006 Silverado 3500s. What manufacturer air bags do you have in your Silverado, Air Lift or Firestone?
view full answer... - What Airbags Can I Use With a 5th Wheel and or a Gooseneck Hitch Hey Jonathan. If you're wanting to have an airbag set up alone with a 5th wheel hitch, you will want to get a FIrestone kit. The Airlift kit you asked about, part # AL88341, will not be able to be installed along side a 5th wheel, or gooseneck, as the beckets will get in the way of one another. Firestone has designed their brackets so that they will not interfere with a 5th wheel or gooseneck. Including the B&W part # BW45SR. So you will want to get part # F2613 or part # F84XV if you...
view full answer... - Recommended Air Bags for a 2025 GMC Sierra 3500 AT4Hey Eric congrats on the new truck! I have a set of air bags that will work with the AT4 model of your 2025 Sierra 3500 but it's from Firestone. They are the Ride-Rite Air Helper Springs item # F2613. These air bags have a identical 5,000 lbs capacity that will level out the rear end of your Sierra when you are towing a trailer or hauling a heavy load in your bed. All mounting brackets and hardware are included for installation. I also recommend adding the Firestone Air Command item #...
view full answer... - Do You Carry any Rear Air Bags for My 2025 GMC Sierra 3500 AT4 to Help with My Suspension?Hello Eric, You are in luck because we do have airbags that are going to work on your 2025 GMC Sierra 3500 AT4, they are the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2613. I know that you asked it on the Air Lift bags, but they do not make them to fit the AT4. If you are looking to pair them with an air compressor, check out the Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth # AL74000. I attached some review/install...
view full answer... - Air Compressor for Air Lift LoadLifter 5000 on 2024 Chevy Silverado 3500Hey Andrew! The Air Lift WirelessAIR Compressor System # AL58WQ you ordered is a great choice and one I often recommend. This comes with the EZ mount for a no drill installation and is dual path for side to side leveling. This will work well with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88341. The one thing I will say is these air bags may not be compatible with an in-bed hitch if you have/use one. If you run into issues during installation...
view full answer... - Recommended Air Bag and Air Compressor Kits for a 2023 GMC Sierra 2500Hey Danny I can't see your cart but I can tell you that both Air Lift LoadLifter 5000 kits we have item # AL88341 and item # AL57341 will work with your 2023 GMC Sierra 2500 so long as it's a 4WD and does not have factory air suspension. Please note that item # AL88341 isn't compatible with in bed hitches and requires drilling. If you've got a gooseneck or 5th wheel set up you'll want to go with item # AL57341. The Air Lift WirelessONE Compressor System for Air Helper Springs item #...
view full answer... - Could Air Lift Kit # AL88341 Fit 2023 Chevy Silverado 2500 with Service BodyHey Derick, was your 2023 Chevy Silverado 2500 originally a cab and chassis model? If so, we don't have any suspension enhancement kits available but if not then yes the Air Lift # AL88341 would fit and work great. Typically trucks that end up getting a service body installed on them are sold as cab and chassis models which don't have a truck bed is why I ask.
view full answer... - Recommended Installer to Adapt a Tonneau Cover for a Fuel Tank Hey Tim, welcome back! I am sorry but I do not know of a company off the top of my head that does that but I can get you connected to our installer network in your area and you can reach out to them. If you go to the product page of the Curt item # C53CR you purchased and scroll down below the pics on the left side you'll see a box that says, SCHEDULE AN INSTALLATION. Go ahead and click on it and it will take you to a page where you'll be able to enter your zip code. Once you do this...
view full answer... - Should I Go With The 5000 Pound Air Bags Or The 7500 Kit For My 2024 Chevy Silverado 2500HD? You are best to just go with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88341 on your 2024 Chevrolet Silverado 2500HD. Since these have a 5,000lb capacity which exceeds the payload your truck is capable of it makes no sense to get the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57541. Both systems have the internal jounce bumpers to help reduce bouncing so for benefits they are the same. I recommend installing the Air Lift WirelessAIR Compressor System # AL74000...
view full answer... - Will the Air Lift Air Bag Helper Springs Work With B&W Turnoverball Gooseneck 2024 Silverado 2500? Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88341 will fit with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1020 on your 2024 Chevrolet Silverado 2500. Since the gooseneck hitch mounts on top of the frame rather than with mounting plates on the sides there are no issues for the mounting hardware from the Air Lift air bags. I do recommend using the Air Lift WirelessAIR Compressor System # AL74000 with these air bags. This system has a smart manifold...
view full answer... - Will the Air Lift LoadLifter 5000 Air Helper Springs # AL57341 Fit a 2024 Chevy 2500 Diesel With FacYes, the Air Lift LoadLifter 5000 Air Helper Springs # AL57341 will fit your 2024 Chevrolet Silverado 2500 double cab with the Duramax diesel engine and factory puck system. We installed the upgraded Springs # AL88341 on a similar 2022 which I have linked the installation video below for you to reference. I recommend installing the Air Lift WirelessAIR Compressor System # AL74000 with the air springs. This is my favorite kit as the smart manifold monitors the air pressure while you drive...
view full answer... - Air Lift Air Bag Helper Springs and Air Compressor For 2023 GMC Sierra 2500HD With Factory GooseneckYou got it Josh. The Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88341 are going to fit your 2023 GMC Sierra 2500HD with the factory gooseneck hitch. These are also the bags I typically recommend as the internal jounce bumpers help to reduce bouncing other systems typically experience when loaded. While the Air Lift WirelessONE Compressor System # AL25980EZ is a great option I recommend stepping up to the WirelessAir # AL74000EZ with its smart manifold. This is a great option...
view full answer... - Recommended AirLift LoadLifter Ultimate with Internal Jounce Bumpers for 2020 GMC Sierra 2500Air Lift does make a kit with internal jounce springs, however, the LoadLifter 5000 # AL57341 are air helper springs only. For your 2020 GMC Sierra 2500 HD I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88341. The EZ Mount WirelessAIR # AL74000EZ is the best option if you're looking to add a compressor system to your set-up. The manifold and compressor are pre-assembled at the factory into a bracket for the easiest and quickest installation...
view full answer...
- Will Air Lift Air Bag Helper Springs Fit With B&W Turnover Gooseneck Hitch On a 2024 Silverado 2500?Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88341 will fit with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1020 on your 2024 Chevrolet Silverado 2500. I prefer these air springs as they have the internal jounce bumper which can protect the bags from damage should they temporarily become deflated. It will also help to reduce bouncing which often occurs when hauling heavy loads. I do recommend pairing this with the Air Lift WirelessAIR Compressor...
view full answer... - Will Air Lift LoadLifter 5000 Ultimate Air Helper Springs Work with Air Lift WirelessONE Compressor The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers like part # AL88341 which are a fit for a 2022 Chevrolet Silverado 3500 are directly compatible with the Air Lift WirelessONE Compressor System for Air Helper Springs part # AL25980EZ. The kit for the air bags comes with adapter fittings (see photo) which will convert the stainless steel lines over to nylon so you can attach them to the compressor. There are no additional parts required for this step....
view full answer...
- Placement Of An Airlift Wireless Air Compressor On A 2021 Chevy Silverado 3500 HDWhen installing The Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount # AL74000EZ if you want the video link below at around the 3 minute mark they explain a good spot to install the system, underneath your 2021 Chevrolet Silverado 3500. The compressor provides 3 programmable pressure settings for frequently hauled loads. It will also notify you when there is a leak or compressor failure. It has a no drill install. When it comes to the air...
view full answer... - Best Suspension Enhancement For a 2023 Chevy Silverado 2500 When Towing a 5TH Wheel CamperI recommend the Air Lift LoadLifter 5000 Ultimate Air Springs # AL88341 as the best rear suspension enhancement for your 2023 Chevrolet Silverado 2500. This will allow you to fine tune the amount of air pressure in the springs to dial in your ride quality. Unlike other air spring systems these have internal jounce bumpers which will help reduce bouncing that is transferred from the 5th wheels suspension. The Air Lift WirelessAIR Compressor System # AL58WQ will allow you to make adjustments...
view full answer...
Do you have a question about this Vehicle Suspension?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Updated by:
Wilson B
Updated by:
Noah M
Edited by:
Daron K
Video by:
Jonathan Y
Video by:
Thomas T
Video by:
Ethan H
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Bradley B
Test Fit:
Jesse B
Test Fit:
Scott A
Test Fit:
Daniel M
Written by:
Alex H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
11/30/2025
I have a few miles of towing heavy trailers, 16-17K, the air bags have been flawless. 1 year down many more expected.