See what our Experts say about this Go Power Accessories and Parts

• Parts Needed to Install Solar on 2016 Jayco Pinnacle 5th Wheel
  Hey Paul; the answer to your question depends on what you want to do exactly. It also depends on what your trailer already has on it. I'm going to assume the 2016 Jayco Pinnacle you put in our fitguide is the trailer you have. I'm also going to operate off of the assumption that it has the solar prep in place. If it doesn't, you will need additional wires to run to everything. If you just want to charge the batteries you will need your 200W solar panel # 34282182 and feet # 34272708 and...
  view full answer...
• How Can I Mount Solar Panels To The Top Of My Truck Cap?
  Hello Blair, thanks for reaching out. You will have to drill into the top of your truck cap in order to mount solar panels. We do not offer any kind of clamp-on mount for a solar panel, so some drilling will be required. We offer a mounting hardware kit for the Go Power solar panels, part # 34272708. This comes with Z-style brackets with self tapping screws, and the nuts and bolts for attaching the panels to the bracket. You will want to use some butyl tape or self-leveling sealant to seal...
  view full answer...
• Height of the Replacement Mounting Hardware for Go Power Rigid Solar Panels
  No, you can't. You'll need to remove the panel to install the Replacement Mounting Hardware for Go Power Rigid Solar Panels item # 34272708. The solar panel will be mounted 1-1/8" above your trailer.
  view full answer...
• How Long are the Screws in the Replacement Mounting Hardware for Go Power Rigid Solar Panels Kit?
  I don't have anyway of knowing how thick the roof of your camper is Rick but I can not see 1-1/4" screws penetrating your roof especially after passing through the mounting bracket. We've never had any issues with the screws that come with the Go Power Panels like item # 34282181. They are a bit smaller at 10-16 x 1” and have a disclaimer saying not to use them in roofs thinner than 1/2" We recommend the Replacement Mounting Hardware for Go Power Rigid Solar Panels item # 34272708, which...
  view full answer...
• What Are The Dimensions Of The Replacement Mounting Hardware For Go Power Rigid Solar Panels?
  I went out to our warehouse and measured the Replacement Mounting Hardware for Go Power Rigid Solar Panels # 34272708 like you're requesting, and measured: -1-3/8" for the length side to side of the bracket. -1-1/8" for the height, -2" for width, and the screw holes measure 1" on center with a diameter of 3/16". So affectively the solar panel would be mounted 1-1/8" above your trailer. I have attached a product overview video as well as a diagram depicting these measurements.
  view full answer...
  
• Hardware, Wiring, and Entry Plate Needed for 190W Go Power Solar Panels
  Each 190 Watt Go Power Overlander Expansion Kit # 34282182 comes with the following connectors and hardware which you can pick up here if you're needing a replacement: Mounting Hardware - # 34272708 MC4 Expansion Branch 1 Male and 2 Female - # 34267049 MC4 Expansion Branch 2 Male and 1 Female - # 34267040 There should also be enough wiring included with each solar panel to link them together although we do have replacements like the 3' Cord # 34274672 or 10' Cord # 34276216. If you're...
  view full answer...
• How to Mount Furrion Solar Panels to RV Roof
  I was able to confirm with Furrion that the 165W Solar Panel # FR73SR does not come with mounting hardware included; he also mentioned that they are in the process of re-designing these panels so the brackets they have previously used have been discontinued. With that said, you can use the Replacement Mounting Hardware for Go Power Rigid Solar Panels # 34272708 to mount this panel to your roof and it will work just fine. This kit comes with the Z style brackets that attach to the panel...
  view full answer...
• Does Mounting Hardware for Go Power Solar Panels # 34272708 Have a Weight Capacity
  The Mounting Hardware for Go Power Solar Panels # 34272708 that you referenced does not have a weight capacity. As long as you are using it with Go Power Solar Panels like what comes with the kit part # 34282183 you'd be fine.
  view full answer...
• Mounting Brackets And Entry Plate For The Go Power Weekender RV Solar System
  The mounting hardware that you'll need for the Go Power Weekender ISW RV Solar Charging System # 34282183 is part # 34272708. As for the terminal block, I think you're talking about the entry plate # 34273840. If I'm wrong then please reply back with a bit more detail about what it is and I can find the correct part for you.
  view full answer...
• Is There a Solar Panel Starter Kit for a 14x10 Trailer
  The 20 Watt Go Power Eco Solar Charging System with Digital Solar Controller # 34273837 that you were looking at along with the Mounting Kit # 34272708 is a decent place to start when it comes to solar panel kits but depending on what you're needing it for this might not even be effective. This kit is good to help provide a maintenance charge to a battery on your trailer or to help give a boost to the amount of power coming from a battery charger, but if you're needing it for something...
  view full answer...
• Solar Panel Kit Compatibility Whether Roof Mounted or Portable
  The solar panel you want will be dependent not on the battery number, but more on the amp hours used by the battery bank and how long you want to use the bank without using any other charging system. I've attached a couple articles to assist. Although there isn't a system that is designed for both rooftop and ground use, they will utilize the exact same panels so the connections to the roof would be the biggest issue. The power wire connections on the roof could match the connections...
  view full answer...
• Solar Panel Mounting Bracket Recommendation For My 2017 Ford Transit T350
  The solar panel mounting brackets that we sell are brand specific. For example, if you have the Go Power Overlander Solar Charging System with Digital Solar Controller - 200 Watt Solar Panel, part # 34282181, the mounting brackets that you need would be the Replacement Mounting Hardware for Go Power Rigid Solar Panels, part # 34272708. I have included product description links, video review links, and a weblink to our solar panel mounting brackets below.
  view full answer...

Do you have a question about this Accessories and Part?