See what our Experts say about this Yakima Roof Rack

• Recommended Roof Rack for a 2024 Toyota Camry w/ No Rails
  I would be happy to! To add a roof rack to your 2024 Toyota Camry with no rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06163 This flush mounted roof rack does not extend over the sides of your Camry's roof. It has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Recommended Roof Rack for a 2024 Ford Escape w/ No Roof Rails
  Congrats on the new SUV. It won't be a problem at all to add a roof rack to your 2024 Ford Escape that looks close to factory. To do so I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06152
  view full answer...
• Will The Thule ProRide XT Roof Bike Rack Fit With Factory Honda Crossbars On A 2018 CR-V
  If you're talking about actual crossbars (running from side-to-side) and not factory rails (running from front-to-back) then yes the Thule ProRide XT # TH598004 will be a compatible fit. The factory honda crossbars are exactly like the Yakima Jetstream aero bars # Y56UV, as a compatible comparison. The clamps will allow you to easily install your rack in seconds, if you want a quick walk-through of this then check out the attached video below.
  view full answer...
• Will Crossbars Interfere With The Panoramic Sunroof Of A 2023 Ford F-150
  Yes, any roof rack, including the Yakima BaseLine FX Roof Rack for Naked Roofs # Y56UV, would most likely prevent you from being able to open your panoramic sunroof. Even if the crossbars clear the glass there's always the chance that whatever weight you out on top of them could cause them to dip down enough and touch so roof rack manufacturers don't ever approve of opening the sunroof while the crossbars are installed. If you'd still like to use these crossbars then you'll also need...
  view full answer...
• Roof Rack Recommendation for 2021 Toyota Highlander with Naked Roof
  Hey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Malibu Sedan w/ No Roof Rails
  I would be happy to! To add a roof rack to your 2024 Chevrolet Malibu with no roof rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06123 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Recommended Roof Rack for a 2018 Ford F-350 Super Duty With a Naked Roof
  For your 2018 Ford F-350 super duty with a naked roof, I recommend going with the Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars # Y56UV with the fit kit # Y06185. This roof rack system will work great with your naked roof, has a maximum weight capacity of 165-lbs, and has integrated t-slots so you can use roof mounted accessories as well.
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• What Parts do I Need to Transfer My Yakima Roof Rack From a 2017 Corolla to a 2025 Camry?
  Hello Patrick. Congrats on the new 2025 Toyota Camry! When I compare the kits I see that it uses the same crossbars # Y00425, and towers # Y28TR. Yes, the base clips and pads are going to be different. The Corolla required different ones for the front and the rear, and the new Camry will use the same part number for the front and rear. You will need to order (2) sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06163.
  view full answer...
• Recommended Hitch for 2023 Toyota Camry for Bike Rack, Kayaks, and Stand Up Paddle Board
  For your 2023 Camry I recommend the Draw-Tite # 36643. This is a Class II hitch so you will have more options for accessories compared the the Class I Curt # C11576. This will allow you to use a bike rack like the Hollywood Racks Destination # HLY94FR. However, we do not carry a hitch mounted kayak/SUP carrier and I'm fairly certain you will have a hard time finding one for a 1-1/4" hitch. If you aren't able to find one I recommend adding a roof rack like the Yakima JetStream which requires...
  view full answer...
• Recommended Roof Rack for a 2024 Toyota Camry w/ No Rails
  I would be happy to! To add a roof rack to your 2024 Toyota Camry with no rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06163 This flush mounted roof rack does not extend over the sides of your Camry's roof. It has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Roof Rack Fit for 2013 Toyota Venza With Panoramic Sunroof
  I checked with our rack manufacturers for you, and there is one roof rack option that will fit your 2013 Toyota Venza with the panoramic (or dual) sunroof, with the rack coming from Yakima; it is made up of the following parts: - Yakima JetStream Crossbars - Black # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06163 - BaseClip Fit Kit # Y06136 This is one of the best roof racks available, as the JetStream bars have what are called "WindRidges" built into...
  view full answer...
• Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails
  Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
  view full answer...
• Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDX
  Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
  view full answer...
• Roof Rack Recommendation for a 2020 Porsche Macan With a Sunroof
  I am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip...
  view full answer...
  
• Recommended Roof Rack for a 2023 Honda Passport With Bare Roof
  Yes, there is a way to add a roof rack to your 2023 Honda Pilot even though you do not have the side rails, and the best option is from Yakima, consisting of the Crossbars # Y36UV, Fit Kit # Y06152 and Fit Kit # Y06163. This rack has a flush design which means the crossbars do not extend past the mounting feet for a great look. This aero bar roof rack system has a 165 lbs capacity. The strips in the top channels dramatically reduce drag and wind noise.
  view full answer...
• Recommended Roof Rack for a 2024 Acura MDX w/ No Rails
  I would be happy to help you! To add a roof rack to your 2024 Acura MDX, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
  view full answer...
• Roof Rack Options for a 2009 Toyota Venza with Panoramic Roof
  I do have an option for you but please keep in mind that the list of available roof racks for your 2009 Toyota Venza is very limited due to the panoramic roof construction. However, I checked with Yakima and they do offer a system for this vehicle which is the Yakima CoreBar System part # Y00422, part # Y28TR, part # Y06163, and part # Y06136. This system has aero shaped crossbars which means it will be less noisy and provide less drag than other crossbar types. The Yakima towers are also...
  view full answer...
• Recommended Roof Rack for a 2010 Toyota Venza w/ a Panoramic Roof
  I have a solution for you but there are no Thule systems that will work with your 2010 Toyota Venza and the panoramic roof. Instead you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06136 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Does the Yakima Roof Rack Fit a Panoramic Roof on a 2011 Toyota Venza?
  Yes! The Yakima Roof Rack system for Naked Roofs is confirmed to fit your panoramic roof on your 2011 Toyota Venza. This is a perfect fit for your vehicle. Although, it is important to note that you may not be able to open your sunroof, I recommend measuring the top-most part of your roof when opening to make sure before you attempt it. This Yakima Roof Rack is made of of the parts: # Y00426, # Y28TR, # Y06136, and # Y06163. Check out the installation video on a different vehicle to...
  view full answer...
  
• Roof Rack Recommendation for 2019 Volkswagen Jetta with Panoramic Sunroof
  I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof. For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set.
  view full answer...
• Roof Rack and Kayak Carriers for 2006 Scion xB
  We can help you with a roof rack for your 2006 Scion xB to allow you to transport your two kayaks. On the linked page you can see all roof rack options for your xB with a bare roof. Please note that these various roof rack systems have differing weight capacities; you will want to be sure to choose one that can handle the combined weight of your two boats plus the chosen kayak carriers you mount on the roof rack. The lowest-cost roof rack with the maximum 165-lb weight capacity is the...
  view full answer...
• Roof Rack Recommendation for a 2005 Scion xB and Extended Yakima LoadWarrior Cargo Basket
  Since you are interested in the Yakima LoadWarrior Cargo Basket with Extension, # Y07070-74, the roof rack that I recommend for your 2005 Scion xB is the Yakima BaseLine Tower Roof Rack which consists of the following parts. 58 Inch Round Crossbars # Y00409 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClip Fit Kit # Y06163 The LoadWarrior cargo basket with the extension requires a roof rack with a crossbars spread between 30 inches and 50 inches. The BaseLine Tower roof rack...
  view full answer...
• Roof Rack Fit for 2020 Honda Passport
  The part you mentioned is just a single crossbar, and is not a fit for a 2020 Honda Passport, but there is an option for a roof rack for a 2020 Passport, so long as you have factory-installed rails that run front-to-back. If you do, the rack that fits is from Malone: - Malone AirFlow2 Roof Rack # MAL84AR If you do NOT have raised side rails there isn't a flush-mounted option, but you can still add a high-quality rack from Yakima to your 2020 Honda Passport with the following parts: -...
  view full answer...
• Roof Rack Recommendation for 2021 Porsche Macan with Naked Roof
  Inno does not have a roof rack fit for your 2021 Porsche Macan but we do have other options that would work great. For that I would recommend the Yakima round bar roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06163, # Y06189. We recently went out and installed several of the roof racks we carry and everyone really liked the Yakima rack the best even though it does cost a little more than some other options.
  view full answer...
• 2016 Toyota Venza Roof Rack Recommendation to Fit with Sunroof
  I recommend installing a Yakima JetStream roof rack on your 2016 Toyota Venza. This is partly due to all of the other roof racks having a "no-fit" note for the sunroof on your vehicle, but also because the Yakima roof racks are top-notch in quality and design. Here is what you need for your application: 60" JetStream Crossbars - Black # Y00426 BaseLine Towers - # Y28TR BaseClips - # Y06136 AND # Y06163 Lock Core Kit - # Y07204 (optional) If you let me know what you plan on using the roof...
  view full answer...
• Yakima Roof Rack For A 2022 Acura MDX With Flush Factory Side Rails
  For your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs. Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs. Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178.
  view full answer...
• Roof Rack Recommendation for 2004 Scion xB
  I do have a solution for you, however the Yakima Q Towers referenced in your question are not a confirmed fit for the 2004 Scion xB. For your 2004 Scion xB with a naked roof, I recommend the complete Yakima Roof Rack which includes the CoreBar Crossbars, part # Y00422 that you mentioned in your question but also the necessary BaseLine Towers and BaseClip Fit Kit, parts # Y28TR and # Y06163 that will serve as the attachment points for the crossbars. These are aero-style crossbars that...
  view full answer...
• Recommended Roof Rack With 100 lb Capacity for 2019 Toyota Camry LE
  For a roof rack I recommend the Yakima JetStream roof rack system. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 -BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06163 -Yakima Same Key System (SKS) Lock Cores # Y07204 (optional if you want to add locks) This roof rack is extremely quiet and looks great on any vehicle. The rack is capable of...
  view full answer...
• Recommended Roof Rack for a Hullavator on a 2011 Toyota Venza w/ the Moonroof and No Side Rails
  To use the Thule Hullavator item # TH898 on your 2011 Toyota Venza you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work. Since your Venza does not have a roof rack and you have the glass roof there aren't many options. There is a roof rack that will work for you since you do not have the side rails. You will want the roof rack by Yakima and it includes the following parts: Yakima...
  view full answer...
• Options to Transport Bikes on My 2022 Hyundai Ionic Plug-In Hybrid
  While we do have a bike rack option for you, we currently do not have any hitches that we well that can allow you to mount a rack for your plug-in Hybrid 2022 Hyundai Ioniq. This is because since your model is a new model, manufacturers have not engineered a model that fits the exact design of your vehicle quite yet. With that being said, I recommend using a trunk bike rack like the Yakima FullBack 2 # Y02634 or the FullBack 3 # Y02633. Not only does the FullBack include a 35-pound per...
  view full answer...
• How to Carry a SUP on the Roof of a 2019 Hyundai Ioniq
  You can definitely use the SeaSucker Board Carrier # 298-BX1806 on your 2019 Hyundai Ioniq but this is actually a carrier in and of itself so it doesn't require a roof rack on your vehicle and you wouldn't be able to install your Thule SUP carrier to it. If you still want to stick with your Thule SUP carrier then I recommend the Yakima JetStream roof rack which consists of 50" JetStream Bars # Y00425 Black, the BaseLine Towers # Y28TR, and the Fit Clips # Y06175 and # Y06111. You can add...
  view full answer...
  
• Roof rack for a 2008 Mazda 3 WITHOUT Fixed Mounting Points on the Roof
  Since your 2008 Mazda 3 sedan does not have the fixed mounting point on the roof you will need to use a different style of roof rack but not a raingutter mount system. I have included a link to all of the options for a 2008 Mazda 3 sedan without fixed mounting points. If you like the Yakima system you will need the following parts: 58 inch crossbars # Y00409 BaseLine Towers # Y28TR RoundBar Adapters # Y03536 BaseClips # Y06143 and # Y06111
  view full answer...
• How to Carry 4 Bikes with a 2017 Hyundai Ioniq
  The hitches available for your 2017 Hyundai Ioniq are all Class I hitches like the Draw Tite part # 24963 which is a confirmed fit. Class I hitches can only carry up to 2 bikes at a time since they are for lower capacity vehicles. Any more than that and the weight and leverage of the additional bikes stresses the hitch/vehicle too much. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys...
  view full answer...
• Kayak Carrier and Roof Rack Recommendation for 2006/2007 Mazda 3 Hatchback
  For a two kayak carrier that would work great on both of your Mazda 3's you would want the Yakima BigStack part # Y04041. This will carry your two kayaks easily and comes with all of the needed straps to secure them. For both your 2007 and 2006 Mazda 3 the same Yakima roof rack will fit and work well. You would need the part numbers # Y00408, # Y28TR, # Y03536, # Y06143, and # Y06111.
  view full answer...
• Rola Roof-Rack System for a 2009 Mazda 3 with 4 doors
  For a 2009 Mazda 3 there are several roof rack options depending on how your vehicle is equipped. For a 4-Door with fixed mounting points with no existing rails or crossbars you can use the Rhino Rack roof racks which is made up of the following parts: # RRVA118B-2, # RRRLKVA, and # DK289. For a 4-Door without fixed mounting points with no existing rails or crossbars you can use the Yakima Roof Rack made up of the following parts: # Y00426, # Y28TR, # Y06143, and # Y06111.
  view full answer...
• How to Carry Bikes on a 2017 Hyundai Ioniq Electric
  If there is enough demand then the hitch manufacturers will make a hitch for the electric version of the 2017 Hyundai Ioniq. But as of right now I have not heard of one in the works. Right now the only way to carry bikes on your Ioniq is a roof rack. The most cost effective option is a Yakima rack using the following parts: CrossBars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit (front) # Y06175 BaseClip Fit Kit (rear) # Y06111 Then you could add a bike...
  view full answer...
• Can 48 inch Yakima Crossbars Fit on 2008 Mazda 3 5 Door
  Since the Q Tower system is no longer the current roof rack Yakima roof rack and has been phased out we don't have the parts needed to install a Q Tower setup with 48 inch long bars but I was able to check with Yakima and the 48 inch bars are correct for your vehicle. The current roof rack components needed are the BaseLine Roof Rack part numbers # Y00408, # Y28TR, # Y03536, # Y06143, and # Y06111.
  view full answer...
• Solution for Transporting Bikes with 2018 Hyundai Ioniq Electric
  Since you have the electric version of the 2018 Hyundai Ioniq the only solution we have for carrying bikes will be with a roof rack since none of our hitches are a fit and we also do not have any trunk racks. So for a roof rack we have the Yakima CoreBar Rack part numbers # Y00421, # Y28TR, # Y06175, and # Y06111 which is a confirmed fit and would work great. These bars are aero shaped so you'll have minimal wind noise and this rack is very easy to install as well. Then for bike racks...
  view full answer...

Do you have a question about this Roof Rack?