To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 50" Long:Specs:
Inno Square Load Bars - Black - 50" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, on our 2016 Toyota Camry, we're going to be test fitting the Inno Aero roof rack system consisting of part numbers INXB130-2, these are the Inno Aero crossbars, 51-inches long, part number INXS250, and these are the Inno through feet for the Aero crossbars, and part number INK872, and this is the custom fit kit for the Toyota Camry. The Inno Aero roof rack system is great for putting accessories up on your roof and freeing up space inside your vehicle. With removing our end cap here, you can see it has this nice rubber strap along the center here. Now, that coupled with the aerodynamic features of the bar will cut down wind noise and drag. Also, by pushing down on this, you can install T track accessories for your roof rack. Now, a lot of other roof racks will require you to remove the rubber strip and cut it to length, but this, all you have to do is push it down. Then reinstall your end cap. All of our through feet have these locking end caps here, so once you install this onto your roof, it's going to be secure to your roof.
The two bars combined have a carrying capacity of 120-pounds, although you always want to check with your vehicles manual to make sure it can withstand that weight. Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We have a rear bar partially assembled on our table here, and we'll show you how the other half goes together. Slide this out on the inside, and you'll see that on the bracket here, we have this little marking here and it's going to fit in perfectly like so. We'll slide it all the way back in, and then get ready to install our foot. Unlock the end cap here.
Then we'll line up this top piece of our foot with this empty slot here on the inner bracket that we just installed. Then line up our screw with this portion here. We'll push it into place, and then push it down the channel. Next, we'll get our measurement set between our two feet, as prescribed in the instructions. We'll slide our foot back till it's set. Once everything is set between the two, we'll completely tighten them down using our included Allen tool.
Now we can start installing our fit kit. Our fit kit will consist of two items. We're going to have the rubber pad here and our clamp. Now, the rubber pads are labeled, so make sure that the right pad goes with the right foot. Also, you'll see that it has these marks here that actually fit with these indentations on the foot.
Just line them up properly, and they just push right into place. Next, we'll install our clamp, which just you unscrew the end here, place the clamp on, and then reattach it loosely just to hold the clamp in place. Finally, we'll put our end cap into place. Now we're ready to install it on the roof of our vehicle. The measurement we're going to set here is going to be from the center of the door jamb to the center of our rear bar. We'll do this on both sides to make sure that the bars are parallel. We'll tighten up the clamps just so they're snug up against our door. We'll do this on the other side as well. The tool that we have here actually clicks once it's completely tightened down so you don't over or under tighten. Our final step is to put on our locking end caps, we'll do this on both sides as well. We'll take our hook ends here, place them on these portions, and you just push up and lock it in place. Now, there is one other thing I'd like to go over. You'll notice on the table earlier, we had this foam pad here. You would actually push this to the inside, here, and then cut it to length to take out the noise that would be created by this gap here. For demonstration purposes, we'll leave that out. Now we're ready to load up our accessories and hit the road. There you have it for the Inno Aero roof rack system on our 2016 Toyota Camry.
Average Customer Rating: 4.7 out of 5 stars (401 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.Easy to install and sturdy for the roof basket that was installed as well. Zero problems for the miles driven and the load on top.
This car roof rack cross bars were easy to assembly. Attaching the cross bars to the car takes a little patience to ensure that the cross bars are centered on the car, the correct distance from the center of the front & rear doors and parallel. But going through it once it is easy to repeat. I have sued the carrier once to haul 13 2x4 lumber no problems.
Got it for a 2006 Toyota Prius. Overall a great purchase. It was sturdy and never had any major issues. I would 100% recommend getting the locks.
I almost gave it 4 stars for one reason. If you put it on as the instructions tell you to, it whistles really loud. It just takes a bunch of small iterations and quick drives down the street to find out if it stopped making noise. Other than that, great purchase.
The roof racks have been great. I've used them with j-hooks and rear loading slider type pads. They are easy to install/remove. In the picture is my 17ft long sea kayak that stayed secure and safe on a 6 hour journey in high winds using the racks.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
The bars could be longer because you cannot attach two sets of attachments, otherwise they are fine
Great cross bars to replace the rusty original cross bars this vintage Thule rack. Classic cars require these old style racks and many are 30+ years old and great to be able to give new life to an old rack system.
Easy to install and have worked great so far!
Really solid bars and end caps, not much more to say!
Super easy to install and remove. Lock feature is great
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
We planned to leave this on for a short time but it's so unintrusive and functional we've had it on the car for a year now. It works great, we've used it to attach a canoe to the car and we now have a rocketbox attached.
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
Perfect fit.
Perfection
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
Well made, sturdy, thick and quality materials. Makes no noise at speed, no complaints thus far.
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
Installed on my 2009 Nissan Armada and it fit. If anyone owns an Armada you know that it takes a special kind of crossrail to fit over the large factory roof rails. This did the trick and was cheaper than the other websites. Arrived in less than a week. I’m happy
It was easy to install. Seems to be very stable.
Works well. They have a rubber boot that goes over the open ends to keep them from making a whistle noise when driving. Don't lose those!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.