See what our Experts say about this Yakima Roof Rack

• Yakima BaseLine Fit Kit For A 2020 Acura MDX With A Naked Roof
  Hi Darcy! If you already have the Yakima BaseLine FX Crossbars for Naked Roofs - 48-3/4" and 52-3/4" Long - Qty 2 # Y36UV, you will want the following fit kit pieces to get it attached to the naked roof on your Acura MDX: BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06105 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06150 If you do not have the crossbars though, we actually have this as a full kit with the Yakima BaseLine FX Roof Rack for Naked...
  view full answer...
• Recommended Roof Rack for a 2023 Honda Passport With Bare Roof
  Yes, there is a way to add a roof rack to your 2023 Honda Pilot even though you do not have the side rails, and the best option is from Yakima, consisting of the Crossbars # Y36UV, Fit Kit # Y06152 and Fit Kit # Y06163. This rack has a flush design which means the crossbars do not extend past the mounting feet for a great look. This aero bar roof rack system has a 165 lbs capacity. The strips in the top channels dramatically reduce drag and wind noise.
  view full answer...
• Does Yakima Baseline FX Roof Rack Fit 2020 Acura MDX With Bare Roof
  The Yakima BaseLine FX is a confirmed fit for your 2020 Acura MDX with a bare roof; you just need the two fit kits for it, and the complete rack is made up of the following part numbers: - Yakima BaseLine FX Roof Rack for Naked Roofs # Y36UV - BaseClip Fit Kit # Y06150 & # Y06105
  view full answer...
• Recommended Roof Rack for a 2022 Jeep Grand Cherokee WK
  We have a couple of options to set your Grand Cherokee WK up with a roof basket but you're going to need to add a pair of crossbars to your roof rails. There isn't any way to mount a basket directly to the side rails. If your Jeep has the black and chrome track flush mounted rails that run front to back you will want the Rhino-Rack RVP Roof Rack for Fixed Mounting Points item # RRRVP27. If your Jeep has the matte black flush mounted rails that run front to back you will need the roof...
  view full answer...
• Recommended Roof Rack for a 2014 Jeep Grand Cherokee Overland
  We have a couple of options for flush mounted crossbars for the 2014 Jeep Grand Cherokee Overland. Which one you'll need is going to depend on what is already mounted on your roof. I have listed all of the options below. If you have any questions please feel free to email me back. Naked roof no side rails and Matte black flush mounted rails that run front to back. Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y36UV BaseClip Fit Kit for...
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Which BaseClip Is Used for Yakima Roof Rack Install on 2018 Tesla Model 3
  I found the install video you referenced that shows a Yakima roof rack getting installed on a 2018 Tesla Model 3 and the BaseClips used are the part # Y06173.
  view full answer...
• How to Fit a Thule Hullavator Pro on a Tesla Model 3
  The Thule # TH898 Hullavator Pro can be installed on Aero cross bars on a Tesla Model 3 as long as the cross bars extend past the mounting feet by 4 inches to 8 inches, and the cross bars are separated by at least 24". If you do not already have crossbars you can use the Yakima parts # Y00426, # Y28TR, and # Y06173 for 60" JetStream Crossbars. i have attached links to each of these products and and install videos.
  view full answer...
  
• Will Yakima SkyBox 21 Cargo Box Fit 2020 Tesla Model 3
  I checked with Yakima and can confirm that the Yakima SkyBox 21 Rooftop Cargo Box # Y07337 will fit a 2020 Tesla Model 3. This is true whether you have the factory roof rack or a roof rack from Yakima which fits your Model 3. That rack is made up of the following parts: - Yakima JetStream Crossbars - # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06173
  view full answer...
• Recommended Roof Rack For a 2023 Tesla Model 3
  I recommend using the Yakima JetStream roof rack on your 2023 Tesla Model 3. You will need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers for Yakima Crossbars # Y28TR BaseClip Fit Kit # Y06173 This roof rack gives you aero crossbars to reduce noise and will accept T-Track mounting accessories. The Yakima Same Key System # Y07208 provides you 8 lock cores for use on the roof rack itself and with your Yakima accessories to all be keyed alike.
  view full answer...
• Which SeaSucker Roof Rack Fits 2018 Tesla Model 3 and How to Lock to Vehicle
  SeaSucker has a roof rack that fits your 2018 Tesla Model 3 but the rack you mentioned is actually not a roof rack and is for carrying a kayak. Instead we have the # 298-SX6000B which is a fit and is compatible with the Thule cargo box you have as well. To lock this you'd want to use the window cable anchor part # 298-BA0010 with a cable lock like # e98891. The anchor gets shut in the window which gives an attachment point for the cable lock to wrap around. This isn't my favorite choice...
  view full answer...
• Can I Carry Four Bikes On A 2020 Tesla Model 3
  The Stealth Hitches Hidden Rack Receiver # 391TES317, has a maximum tongue weight of 350 lbs, but your car is only rated to carry 200 lbs on its hitch receiver. A Kuat NV 2.0 Base Bike Rack for 4 Bikes # BA22B-BA02B, weighs 82 lbs. This means your bikes could weigh up to the four bike maximum of 118 lbs, That is just under 30 lbs per bike, so e-bikes are definitely out. On the other hand, the Yakima HangOver 4 Bike Rack for Mountain Bikes - 2" Hitches - Tilting, part # Y02484, needs at...
  view full answer...
• Parts Needed To Install Yakima Round Bars On A 2023 Tesla Model S
  Wow it must have been your lucky day! We can absolutely provide the rest of the parts you need to install your newly acquired Yakima round bars # Y00409 to your 2023 Tesla Model 3. You will need the following parts; BaseLine Towers # Y28TR Roundbar SL Adapters # Y03536 BaseClip Fit Kit # Y06173 (you will need to order qty 2 of this part) That will be everything you need. The 66" bars might be a bit long for your roof and you will likely have a considerable amount of overhang. Round bars...
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Which BaseClip Is Used for Yakima Roof Rack Install on 2018 Tesla Model 3
  I found the install video you referenced that shows a Yakima roof rack getting installed on a 2018 Tesla Model 3 and the BaseClips used are the part # Y06173.
  view full answer...
• How to Fit a Thule Hullavator Pro on a Tesla Model 3
  The Thule # TH898 Hullavator Pro can be installed on Aero cross bars on a Tesla Model 3 as long as the cross bars extend past the mounting feet by 4 inches to 8 inches, and the cross bars are separated by at least 24". If you do not already have crossbars you can use the Yakima parts # Y00426, # Y28TR, and # Y06173 for 60" JetStream Crossbars. i have attached links to each of these products and and install videos.
  view full answer...
  
• Will Yakima SkyBox 21 Cargo Box Fit 2020 Tesla Model 3
  I checked with Yakima and can confirm that the Yakima SkyBox 21 Rooftop Cargo Box # Y07337 will fit a 2020 Tesla Model 3. This is true whether you have the factory roof rack or a roof rack from Yakima which fits your Model 3. That rack is made up of the following parts: - Yakima JetStream Crossbars - # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06173
  view full answer...
• Recommended Roof Rack For a 2023 Tesla Model 3
  I recommend using the Yakima JetStream roof rack on your 2023 Tesla Model 3. You will need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers for Yakima Crossbars # Y28TR BaseClip Fit Kit # Y06173 This roof rack gives you aero crossbars to reduce noise and will accept T-Track mounting accessories. The Yakima Same Key System # Y07208 provides you 8 lock cores for use on the roof rack itself and with your Yakima accessories to all be keyed alike.
  view full answer...
• Which SeaSucker Roof Rack Fits 2018 Tesla Model 3 and How to Lock to Vehicle
  SeaSucker has a roof rack that fits your 2018 Tesla Model 3 but the rack you mentioned is actually not a roof rack and is for carrying a kayak. Instead we have the # 298-SX6000B which is a fit and is compatible with the Thule cargo box you have as well. To lock this you'd want to use the window cable anchor part # 298-BA0010 with a cable lock like # e98891. The anchor gets shut in the window which gives an attachment point for the cable lock to wrap around. This isn't my favorite choice...
  view full answer...
• Can I Carry Four Bikes On A 2020 Tesla Model 3
  The Stealth Hitches Hidden Rack Receiver # 391TES317, has a maximum tongue weight of 350 lbs, but your car is only rated to carry 200 lbs on its hitch receiver. A Kuat NV 2.0 Base Bike Rack for 4 Bikes # BA22B-BA02B, weighs 82 lbs. This means your bikes could weigh up to the four bike maximum of 118 lbs, That is just under 30 lbs per bike, so e-bikes are definitely out. On the other hand, the Yakima HangOver 4 Bike Rack for Mountain Bikes - 2" Hitches - Tilting, part # Y02484, needs at...
  view full answer...
• Parts Needed To Install Yakima Round Bars On A 2023 Tesla Model S
  Wow it must have been your lucky day! We can absolutely provide the rest of the parts you need to install your newly acquired Yakima round bars # Y00409 to your 2023 Tesla Model 3. You will need the following parts; BaseLine Towers # Y28TR Roundbar SL Adapters # Y03536 BaseClip Fit Kit # Y06173 (you will need to order qty 2 of this part) That will be everything you need. The 66" bars might be a bit long for your roof and you will likely have a considerable amount of overhang. Round bars...
  view full answer...

Do you have a question about this Roof Rack?