bing tracking image
  1. Roof Rack
  2. Cadillac
  3. CTS
  4. 2013
  5. Malone
FITS 2013 Cadillac CTS
Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver

Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver

Item # MPG216
Retail:$209.95
Our Price: $188.95
You Save: $21.00
Roof Rack
Confirmed to Fit
2013 Cadillac CTS

Wagon

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 12 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Malone roof rack for your 2013 Cadillac CTS are available from etrailer.com. Installation instructions and reviews for your Cadillac roof rack. Expert service, and great roof rack prices. etrailer.com carries a complete line of Malone products. Order your Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver part number MPG216 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1293)
  • Q & A (0)
  • Photos

2013 Cadillac CTS - Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver

  • Complete Roof Systems
  • Aero Bars
  • Malone
  • Silver
  • Overhang

This quiet, aerodynamic roof rack mounts to your Cadillac CTS with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.


Features:

  • Aero-style roof rack lets you mount accessories on your vehicle with raised, factory side rails
  • Aerodynamic shape creates a quiet roof rack system
  • Full-length design maximizes space for carriers and accessories
  • Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
  • Rubber strips in T-slots reduce drag and wind noise
  • Safe and easy installation - rubber-coated steel clamps fit tightly around side rails
  • Locking tower covers secure roof rack to side rails
  • Lightweight, aluminum crossbars are rustproof
  • Plastic endcaps help keep water and debris out of bars
  • Durable nylon towers are weather resistant
  • Complete system includes 4 towers, 2 crossbars, installation tool and keys


Specs:

  • Rack weight capacity: 165 lbs
    • Always observe your vehicle's maximum roof load capacity
  • Minimum crossbar spread: 24"
  • Crossbar dimensions: 58" long x 3" wide x 1" tall
  • T-slot dimensions: 13/16" wide x 1/4" tall
  • T-slot top opening: 7/16"
  • Underbar slot: Full length
  • Weight: 13 lbs
  • Limited lifetime warranty


Malone AirFlow2 Roof Rack

The Malone AirFlow2 roof rack lets you carry gear and accessories on the roof of your vehicle with raised, factory side rails. This complete roof rack system includes 2 aluminum, aerodynamic crossbars and 4 towers. The full-length crossbars extend past the towers to give you more mounting space for carriers, and the towers have built-in locks to protect the rack from theft. The rack clamps onto your raised side rails and tightens down with the included tool, so it's easy to remove and install.


Aerodynamic Shape

Malone AirFlow2 Crossbar with Endcap

The AirFlow2's Aerodynamic shape helps control air flow over and under the bar to significantly decrease wind noise and vibration even at highway speeds. This decreases the need to add a fairing to your roof rack. The aero-style bar also reduces drag and helps maintain fuel efficiency.


Lightweight, Aluminum Crossbars

Malone AirFlow2 Crossbar with Endcap

The silver crossbars are made of aluminum, which makes them strong, lightweight, and resistant to corrosion. The bars also have plastic endcaps to protect the interiors from the elements and to give your roof rack a finished look.


Durable Towers with Built-In Security

Malone AirFlow2 Roof Rack Towers

The towers are made of molded nylon that won't fade or wear down when exposed to the elements. Each tower includes a nylon cover with a built-in lock to deter would-be thieves from removing the rack from your roof. The covers also protect the towers' interior and hardware from the elements.


Easy Installation with Rubber-Coated Steel Clamps

Malone AirFlow2 Roof Rack Installed

The towers attach to your vehicle's raised, factory side rails with rubber-coated steel clamps. The rubber coating provides a superior grip on your side rails and protects them from damage during installation and use.


Malone AirFlow2 Roof Rack Installation Tool

To tighten, simply turn the bolt inside the tower assembly with the included installation tool until the clamps are snug. Once assembled, the towers and crossbars stay together as one unit, which makes removing, storing, and reinstalling the system a snap. To remove, simply remove the cover and loosen the bolts inside the towers with the installation tool.


Channel and Clamp-On Accessories

Malone AirFlow2 Roof Rack Rubber Clamps

These crossbars have built-in top channels with strips that allow you to carry channel-mounted accessories on your roof. You can remove, trim, and re-insert the strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet.


Maximum Cargo Carrying Capacity

Malone AirFlow2 Roof Rack Full-Length Crossbars

The AirFlow2 includes full-length crossbars that extend past the towers. The increased length gives you more space to mount accessories and carriers to your roof rack. The bars are compatible with most universal, clamp-on accessories and carriers.




MPG216 Malone Air Flow 2 Universal Roof Rack for Elevated, Factory Side Rails - Aero Style Load Bars - Silver - 58" Long

Installation Details MPG216 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver - MPG216

Average Customer Rating:  4.6 out of 5 stars   (1293 Customer Reviews)

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

by:

I have had these for about a year now and they work great. I have a set of Malone fold away kayak racks that I use on them. I am quite happy with both Malone products.

Jake

5/10/2024

I am two years out with Malone roof racks and they are holding up nicely. I did have to replace one of the end caps as it came off at some point. But the part was inexpensive and easy to find.



by:
2020 Subaru Ascent

Love this set of cross bars-use them for kayaks and to hold my rooftop tent without any worries.also put my Thule xl car top carrier on with out any

Jonathan

12/28/2023

Still holding up with no issues.been on thru out the hot summer and multiple trips thru the car wash.would highly recommend



by:

Beware anyone with a Gen 5 Outback. Doesn’t fit on Subaru Outback 2016. Was assured it was a fit for my vehicle on the website and I even emailed eTrailer to make sure. Got a response from an associate “yes, these will fit.” Now I have to pay $34 shipping to return.
The tower clamps fit around factory crossbars when they are swung closed but due to the factory raised plastic rails the Malone crossbars can only fit towards the middle of the roof and would only be spaced 15in apart. Useless.
Seems like a good product, but etrailer should not list these bars as a fit for this vehicle.

Etrailer Expert

Jenny N.

5/12/2023

The Subaru Outbacks will limit the cross bar to less than 24 inches. This will limit what can be carried as any crossbar spread under 24 inches should not be used to carry kayaks, ladders or other long items.



by:
2019 GMC Acadia

These work really well. After shopping around a bit, these were the best value (price) without being of poor quality. They're really well built, strong, and fit my 2019 GMC Acadia SLT(2) nicely. I opted for the 58" version with the idea that I could haul (2) 15' Kayaks. The boats go on very nicely and the extra width helps me keep them off the vehicle. I also purchased a decent T-Slot ski carrier that had great reviews and hauled 6 pairs to VT last winter from MD. The extra length may not appeal to some. If so, get the smaller version. I believe in Function. So the 58's are right by me. Reviews I read on these complained about the end caps getting lost, coming off, etc. I could see that happening. When I installed them, I ran two passes of electrical tape on the end caps to secure them. I replace it every time I open the end caps - switching from ski to kayak season. These bars have remained tight to the vehicle after 1 year. They show little signs of wear too. I'm a "spirited" driver. They've hung on very well. There is some road noise from them. But I also enjoy music - so that doesn't bother me in the least. Take your time installing and gently tighten as you go. I think that is a big part of the installation. Overall - excellent product, priced incredibly well against the big names, accepts T-Slot accessories, and more. I'm happy. Good luck!



by:

I have ordered several products from etrailer and been happy with them all. One of the plastic endcap was broken on this one and they sent me four additional endcaps free of charge. The customer service is spot on.!! Thanks, Alex!



by:

These were exactly what I was looking for, they have been able to handle my needs with no issues at all. They have support two kayaks and my fishing poles with ease and I love the way they look. Great investment.



by:
2019 Subaru Forester

I just received the 58" Aero crossbars from these guys for my Subaru forester they fit great and although I haven't loaded them yet, I know they will work perfect!

Marco

2/1/2024

They are working out great for me, Ive carried 250lbs. of steelover the side rails!



by:

Very impressive hardware, instructions, and service at 1/2 to 1/3 the competition's cost. (Correction: there really IS no competition.) I tossed the rack onto my 2011 Honda Odyssey OEM roof rack without tightening anything to see how it all fits together, and was very pleased. I figured out how to fabricate a simple, elegant, low-profile, non-invasive, barely noticeable (it's my wife's minivan, after all) roller so I could easily slide my 12' kayak on top by myself. I planned exactly how to tie the kayak's nose and tail down securely without any mods to her van. I bought all the pieces and parts to do all the above, but before I got out my tools and mounted everything, I asked myself "Is there any way this kayak will fit securely inside the Honda with all the doors and windows closed?" The answer was, "Yes", so the rack is now gathering dust due to no fault of its own. It's inexpensive enough (try saying that about any of its "competition") that I'll keep it anyway in case I buy a longer kayak some day or need to mount the rack on some other vehicle.

When shopping for any related products now, I don't even look at any other brand or source. I now trust Malone and E-Trailer to provide the optimal combination of product, price, and service. I have no connection to Malone or ETrailer, and paid full price, but when a company or product performs this well, I want to help get the word out for everyone's benefit.

Michael

10/19/2023

Its been a year now, and Its still gathering dust because the kayak fits inside my wifes minivan. I fabricated a solid, simple, diagonal, low-effort, one-man mounting system on the back of my motor home, and the kayak fits inside my Outback with only a couple of feet sticking out of the partially opened tailgate. I got lucky no exhaust fumes get inside and the sound and heatcool systems work fine even on long highway trips in hot and cold weather. I dont feel I wasted my money, though, because this experience taught me three things: 1. eTrailer is great to work with. 2. Malones products are so exceptionally well designed, constructed, and priced that theyre the first brand I look at when buying anything in their line of products. 3. If I ever need to mount this rack on another vehicle, Im confident that Malone makes a solid mounting bracket to fit it.



by:
Subaru Forester

These are great racks at a great price. They fit perfectly on my 2023 Subaru Forester Wilderness. I routine carry multiple whitewater kayaks with them.



by:
2023 Toyota 4Runner

as described. fits well. installation instructions were OK, but I had to re-fit the crossbars to install the bottom weather/wind seal strips. too hard (cold temps) so i pre fit the bars, measured and cut the strips, and slid them in from an open end - same with the tracks outside the clamps on the overhangs. total install time about 2 hours. no discernable noise from wind.



by:
Chevrolet Traverse

I bought these over a year ago, we use them on our 2022 chevy traverse. There were super simple to install, and unlike many of the other options for this car, they are low profile and very aesthetically pleasing. We frequently put a Thule Force XT XL box on there. Overall I could not recommend these crossbars enough.



by:
2021 Subaru Outback Wagon

Another great purchase from eTrailer. I was looking at the 50" and noticed that it did not have a recommendation for my car. I checked further and found that the 58" had a recommendation. I'm glad that I followed this. It fit perfect. The 50" would have been just a half inch too short. They include a rubber strip to fill in the gap between the mounts on the bottom. Be sure and put this in place, even in the ends past the mounts. The purpose is to stop the wind noise, picture blowing across a soda bottle, you want to stop that at any frequency.
Installing was quite easy, I did it in about 30 minutes. Take your time, measure and all will fit perfect.
I will keep coming back to eTrailer.com, the rack was a perfect fit, as were all of my other purchases. Trailer hitch for a Outback another for this Ascent, trailer electrical for both cars. I'm impressed that for a relatively new model year, everything is a perfect fit. I've tried others without such clean results.
Now off to get some lumber.



by:

It worked great with my Chevrolet Traverse. I used a roof carrier on it and drove from coast to coast twice with no issues. There is a very tiny bit of whistling when really windy but not disturbing in any way.



by:
2023 Chevrolet Traverse

This is a great tool. The only thing I would recommend to anyone is maybe find something to put between it and your door jamb on your vehicle to spread the weight out some more. I used mine and put a small dent in my door jamb. 6’3” 230lbs. Not a problem with the door step but just how thin the metal is on these new cars these days! Thanks



by:

I've had these on my car for a year now. They are decent for the money and I think they look pretty good too. One very weak point is the plastic end caps. They snap on and are flimsy. I lost one in short order and broke another one sliding a sheet of plywood over it. It would not be hard for them to design a better cap that is fastened better to the rails. I 3D printed new ones that work great and installed with a screw.



by:
2021 Ford F-150

Great looking, fully assembled racks that were easy to install. Works as hoped for with my accessories.



by:
Volvo XC90

Thanks for getting this to me! I needed to turn my beloved Volvo XC90 into a work truck van in the shop. Looks good and very sturdy.



by:
2015 Toyota Sienna

Works great on my 2015 Toyota Sienna LE! Have used it with a Yakima CBX cargo box for a few road trips.



by:

A superb product in every way. Well-made and with concise instructions, this rail system allowed me to put a 25-year-old Thule box back into to service quickly, easily and securely. First rate!



by:
2016 Mercedes-Benz Metris

The 58" Malone MPG216 bars replaced a set of 58" Malone Steel bars. The new bars feel sturdier and a definitely quieter. The fit and finish is great, except for one bar end that doesn't fit as tightly as it should. I put my Yakima Skybox 21 on top of them and they did the job. My only complaint is that they already have a slight bend after being loaded with just 140 lbs. I expected a bend to occur later in the year since the top box stays on for 6 months out of the year, but not after just one road trip. But, there was no movement from the bars or the box at all during the 1600 mile trip. So far, so good.

Etrailer Expert

Heather A.

2/25/2019

The Yakima skybox is about 70 lbs on its own. The weight capacity of the roof rack is 165 lbs. If you are putting 140 lbs worth of cargo in the box, plus the weight of the box itself on the bars that is 210 lbs. The bars will bend if they have 210 lbs of weight on them. Please make sure you are taking into account the weight of the box on the bars as well.



by:
2015 Nissan Pathfinder

-2015 Nissan Pathfinder.
-Malone AirFlow2
Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long.
This is my first ever roof rack so I am by far no expert. I researched many roof racks and I just couldn't see spending 500, 600, or over $700 on an accessory. The installation is not nearly as easy as some would think, in my opinion. However, I am anal and meticulous about every detail. I put the roof rack rail on and got everything into place with measurements (width between them, how much they stick out, etc). Then I mark the underneath of the racks for the rubber to go so I could cut it precisely (you slide in the rubber...although I think some cramped the rails down and then stuffed the rubber in).

Pros:
-Look at my vehicle...I think they look amazing...especially for the price.
-Everything is very firm and doesn't move after proper installation.
-Matches chrome on car and current cross bars

Cons:
-End caps are cheaply made, but I didn't have any problem getting them to snap in. Get a higher grade plastic or something
-Directions that were provided were sparse and you kind of have to figure it out on your own, which wasn't too difficult.
-THE NOISE is my biggest complaint. It's not terrible but enough to annoy me. These are advertised as "Airflow2" so come on. And I'm no aerodynamics professor but shouldn't the more narrow end be pointed toward the wind, not the fat end? Maybe a moonroof visor would help the noise...I don't know.

3.5 - 4 out of 5 because of the noise and because of the cutting and cheap end caps. But for the money, I think they're worth it. Good luck to your purchase and installation...it's not too bad. :)

Etrailer Expert

Mike L.

5/19/2018

Unfortunately, any time a piece of equipment is installed on a vehicle roof, there is going to be wind noise, its unavoidable. Airfoil-shaped crossbars like those on the Malone rack you purchased are actually much more quiet than the older square or round-profiled crossbars. The crossbars are indeed meant to be installed so that the thicker end is pointed forward to the wind, just like an aircraft wing. To keep the wind noise to a minimum, its important that the entire length of the slots in the underside of the crossbar are filled with the provided rubber strips .



by:

etrailer was great to work with. They are very responsive with emails and following up with tracking. I was little disappointed with the average ship time. It was almost like the product didn't get out the door until a week later, but I did get the product in working condition. As for the product quality the only complaint I had was the procedure/instructions for installing. I would totally recommend putting the rubber trim piece in the bottom of the rail during the first part of installation. Don't be afraid to slide that piece in the rail and cut it to size once it hits the end of the rail where it touches the mount. Its easy to cut and this piece is crucial to making the rails very quiet. I installed the first time without it and the wife hated me for installing these. We both looked at each other during the first drive test and said that whistle noise has to go! After installing the trim in the rail these rails were perfect for what I needed. It just needed a better instruction for installing it to top quality. I also recommend you put the trim in the first time because those side black pieces are plastic and they take a special kind of push in on the clip and pull to remove without breaking the clip. I broke my first clip but after that I was able to remove the other successfully. So because of the poor instructions and the removal of the rail to finish installing correctly I am now looking for a plastic end for one of my rails. Overall pretty good and durable. I also wish the instructions explained that when you tighten the mount that it also tightens on the rail too. Maybe I needed to watch a couple more videos about installing these before doing it.

Etrailer Expert

Jenny N.

4/25/2022

I will have our Customer Service team reach out to you. I recommend watching the video installation that we have on a 2013 Ford Explorer. The end caps are available as a separate part. They are part # MPG1012



by:

Okay, etrailer seems to be okay so far.
Just installed the Malone airflow 2 and it took way to long. I had trouble getting the boots on the rail system. After trying one side then the other, it still took a while to loosen or tighten, trying both ways till they finally went on.
Bottom line, I had to work with it to long to get them on the rail system, but after I did! It seems okay. I honestly am not wanting to go through the hassle of taking them off and putting them on over and over. Cutting the rubber inserts for the bottom for wind noise may make that experience okay if it keeps the boots from moving when taking the rails off.
Also thought I had one the book break on me but it’s technically not broke. Here is a picture.

Etrailer Expert

Jenny N.

11/9/2021

Thank you for your feedback. I reached out to Malone and the roof rack should be easy to take on and off. I will have our customer service team reach out to you.



by:
2004 Jeep Liberty

Great fit so far, ez to install and look great on the roof of my 04’ Jeep Liberty. I have 2 pair of Thule Kayak racks looking forward to see how they work on the Alleg bars!

Thomas

7/18/2019

Excellent

Thomas

7/18/2019

Excellent, except I lost an end-cap in a car wash I think?



by:
2014 Nissan Pathfinder

Easy to install on my 2014 Nissan Pathfinder and making adjustments just as easy and as usual etrailer is the best. shipping was quick the only thing that took awhile was me installing it.
I highly recommend
Picture isn’t the best but oh well

Marion

3/28/2020

No problems doing it’s job still very happy with the roof rack


25
1292
Show More Reviews

See what our Experts say about this Malone Roof Rack

  • Roof Rack for 2020 Subaru Outback Wagon with Longest Bars and Highest Weight Capacity
    The roof rack we offer for your 2020 Subaru Outback Wagon that has the longest crossbars and highest weight capacity is the Malone part # MPG216 which has bars that are 58 inches long and a weight capacity of 165 lbs. For a carrier we have the part # Y04086 as well.
    view full answer...
  • Will The Thule Hullavator Kayak Carrier Fit Onto The Malone AirFlow 2 Roof Rack 58"?
    The Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898 is indeed compatible with the Malone AirFlow2 Roof Rack 58" # MPG216. To verify if it will work well on your 2021 Nissan Rogue you will need to measure the distance between your roof rails. If your measurement is 50" or less, then you are all set to install this setup as the Thule Hullavator requires at least 4" of crossbar overhang on each side of the roof rails. I attached a photo that illustrates the measurement you need...
    view full answer...
    Image 1 for
  • Recommended Roof Rack and Roof Box for 2007 Honda Pilot with Side Rails
    The Malone AirFlow2 Roof Rack part # MPG216 is an excellent option for a 2007 Honda Pilot. It will then allow you to use multiple different cargo carriers or other rooftop mounted accessories, the SportRack Vista XL Cargo Box part # SR7018 is a great option. That said, you can use any brand you like and I have attached a full list of options below.
    view full answer...
  • Recommended Roof Rack Setup For Carrying A Tent On A 2013 Subaru Outback Wagon
    Yes, I would be happy to assist you and I know exactly what you need. The most economical setup that will also work for your vehicle is the Malone AirFlow 2 Aero Crossbars 58" # MPG216. This kit comes with everything you need and has a weight capacity of 165lbs. These bars also come with built-in locks.
    view full answer...
  • Can The Thule Hullavator Fit Into The T-Slot Channel On The Malone Aero Crossbars?
    The Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898 actually comes with the hardware necessary to fit into the T-slot channel on the Malone AirFlow 2 Aero Crossbars 58" # MPG216. You do not need anything else in order to do this.
    view full answer...
  • Can Factory Roof Rails be Installed on a 2013 Ford Edge
    Installing the factory roof rails that run front to back for a 2013 Ford Edge that currently has a naked roof will require drilling. Since it's a factory rack I can't really say how labor intensive the install is. I would check with a Ford dealership. Once you get the side rails installed you'll need cross bars as well. A great economical option are the Malone AirFlow2 Aero Crossbars # MPG216. They're 58 inch crossbars with a 165 pound capacity and include locks.
    view full answer...
  • Cost Effective Roof Rack for a 2016 Jeep Patriot To Haul Plywood
    Yes, the Malone AirFlow2 Roof Rack part # MPG216 will allow you to carry plywood on the roof of your 2016 Jeep Patriot. I recommend placing the crossbars as far apart as possible in order to evenly distribute the weight. There will be no damage to the vehicles roof or factory side rails with the above setup. In order to secure the plywood I recommend using the Load Stops part # 753-3761. These will do an excellent job of holding the plywood in place but I do however recommend you still...
    view full answer...
  • Will the Malone AirFlow2 Roof Rack Work On 2020 Subaru Outback With Swing-Out Crossbars
    The Malone AirFlow2 Roof Rack part # MPG216 is an excellent option for a 2020 Subaru Outback Wagon and will work on models with the swing-out crossbars. It has a 165 lb weight capacity which will be the max for options which attach to the swing-out crossbars so as long as you don't exceed this rating you will be fine.
    view full answer...
  • Roof Rack and Snowboard Carrier Recommendation for a 2010 Subaru Forester
    For your 2010 Subaru Forester that has factory raised side rails you would want the Thule Roof Rack part # MPG216 to give your vehicle crossbars to attach a snowboard rack. For a snowboard rack you would then want the Thule Flat Top part # TH7324 to carry 4 skis or 2 boards. Check out the install videos I attached as well.
    view full answer...
  • Does Malone Roof Rack w/ 58 Inch Crossbars Fit 2022 Subaru Forester Wilderness
    Absolutely it fits; the 58 inch crossbars of the Malone SteelTop roof rack will definitely span the width of the raised side rails and fit your 2022 Subaru Forester Wilderness. The correct part number for that roof rack is the following: - Malone SteelTop Roof Rack # MPG202 The SteelTop rack uses square crossbars, so if you don't have a wind fairing, I do recommend considering one in order to help minimize wind noise, the Inno Fairing for Roof Racks # INA262. Otherwise, you can also...
    view full answer...
  • Malone Roof Rack that Fits 2014 Subaru Outback with OEM Bars to Use Thule Hullavator
    The Malone roof rack kit part # MPG216 does fit the raised side rails of your 2014 Subaru Outback Wagon that you mentioned. The minimum crossbar spread that the Hullavator part # TH898 requires is 24 inches so that shouldn't be a problem.
    view full answer...
  • Best Roof Rack Systems for a 2017 Toyota RAV4
    I have some great crossbars for your 2017 Toyota RAV4! If you have raised rails that run front to back, I recommend the Malone AirFlow2 Roof Rack, part # MPG216. It's an all-in-one system that attaches to the rails and gives you aero-style crossbars 58" in length. They have a T-slot as well, making them highly compatible with most accessories. I've linked to a video review of these crossbars for you to look at. If you do not have rails, then I recommend the Thule WingBar Evo Crossbars,...
    view full answer...
  • Recommended Malone AirFlow2 Crossbar Length for 2008 Nissan Rogue
    Malone typically recommends their crossbar fits a little longer than what is standard, mainly because they deal a lot in watercraft carriers that often require larger crossbar spreads and lengths. With that being said, both the 50 inch Malone AirFlow2 # MPG215 and the 58 inch # MPG216 that you referenced will fit the factory side rails on your 2008 Nissan Rogue and work well. Because the feet on the crossbars can adjust along the entire length of the bars, the actual fitment on your vehicle...
    view full answer...
  • Will Thule Force Medium Rooftop Cargo Box TH624 Fit on 2017 Honda Odyssey
    For the Thule Force Medium Rooftop Cargo Box # TH6356B to fit on a vehicle without interfering with the rear hatch opening fully the vehicle should have a distance of at least 41-7/8-inches from the center of the front crossbar to the rear of the roof where it meets the hatch. If the distance from the center of the front bar to this roof/hatch seam is this 41-7/8-inches or more then the box will fit without contacting the hatch. If you do not have roof rack you will need to install one...
    view full answer...
  • 50 Inch Crossbar Roof Rack Recommendation for 2015 Hyundai Tucson
    I have a great 50 inch crossbar roof rack that fits your 2015 Hyundai Tucson with factory raised rails but it's not from Malone as they only recommend their 58 inch bar kit part # MPG216. Instead you'd want the Inno kit part # INB127 and # INFR and you'd be set. If you wanted an aero bar setup that close to 50 inches we have the Rhino Rack part numbers # RRVA126B-2 and # RRSX100 which will give you a 49 inch long crossbar setup.
    view full answer...
  • How to Easily Load Two Kayaks on a 2012 Honda Odyssey
    In order to carry two kayaks on your 2012 Honda Odyssey, I recommend using the Malone AirFlow2 Roof Rack part # MPG216 with the Malone DownLoader Kayak Carrier part # MPG114MD and the Malone TelosXL Load Assist Module part # MPG351XL. The AirFlow2 will allow you to mount both kayaks using the carrier with the load assist in addition to most cargo boxes from Yakima, Thule, Rhino Rack etc. The load assist bars are angled and have height adjustments so you do not need to worry about any overhang...
    view full answer...
  • Roof Rack and Kayak Carrier Recommendation for 2016 Volvo XC90 for 90 lb Kayak
    For your 2016 Volvo XC90 with raised roof rails the 58 inch long Malone roof crossbars part # MPG216 that you referenced are a confirmed fit so this would work well for you. These have a weight capacity of 165 lb too. For a kayak carrier with enough weight capacity you'd want the Rhino Rack J-Style # S512 as it has a 99 lb weight capacity. This is a J-style carrier too which is a bit easier to load than other styles.
    view full answer...
  • Replacement Hardware To Mount Thule Hullavator Onto Malone Crossbar Top Channel
    You will need 8 of the Replacement Socket Head Cap Screw M6 x 30 # TH919063054 and 8 of the Replacement Square Nut # 853-7557. This will allow you to install the Thule Hullavator onto various crossbars with the T-slot channel, including the Malone # MPG216.
    view full answer...
  • Could Malone AirFlow 2 Roof Rack Have it's Crossbars Shortened
    It is possible to shorten the crossbars of the Malone AirFlow 2 part # MPG216 which is 58 inches but an easier option might be to go with the 50 inch version part # MPG215.
    view full answer...
  • What Do I Need to Fit My Yakima Kayak Carrier on My 2021 Subaru Outback with Raised Rails?
    In order to use your Yakima kayak carrier on your 2021 Subaru Outback Wagon with raised factory rails, you will need a crossbar system. I recommend the Malone AirFlow2 Roof Rack - 58" # MPG216. The AirFlow 2 is a durable economic roof rack system that will provide you with 165 pounds of maximum weight capacity. However, since I do not know your particular Yakima kayak carrier, I cannot confirm for sure if it will fit onto the AirFlow2 crossbars. For this reason, I recommend measuring...
    view full answer...
  • Roof Rack Recommendation that Fits Flush Rails of 2017 Volvo XC90
    Thanks for the picture of the roof of your 2017 Volvo XC90! From that I can tell you have what is considered flush rails which while we have great roof rack fits for the Malone part # MPG216 would not fit as this rack system requires rails that are raised off of the roof that you could fit your hand under. Instead you'd need a rack designed to attach to flush rails like the Rhino Rack roof rack part numbers # RRVA126B-2 and # RRSX040 which is a confirmed fit for your roof, installs easily,...
    view full answer...
    Image 1 for
  • Recommended Car Awning To Use With Malone AirFlow2 Aero Crossbars MPG216
    Luckily, the Malone AirFlow2 Aero Crossbars 58" Long # MPG216 on your 2018 Subaru Crosstrek have industry standard T-slot channels on top which will allow fitment of many awning kits. For Rhino-Rack awnings you could look into the Rhino-Rack Sunseeker Awning 49 Sq Ft # RR32132, Rhino-Rack Sunseeker Awning 55 Sq Ft # RR32133, or Rhino-Rack Dome 1300 Awning 64 Sq Ft # RR32125. You could also look into the Yakima SlimShady Awning which comes in various sizes: 30 Sq Ft # Y56VR, 42 Sq Ft #...
    view full answer...
  • Would Roof Rack 2017 Honda Pilot Also Fit 2022 Honda Passport
    The Rhino Rack ROC25 roof racks are very specific in what they fit and do not have a way to adapt to different vehicles easily. So your # RR73XR would not be able to fit your 2022 Honda Passport and you'd need to install a new roof rack like the Malone part # MPG216 for if you have raised rails or the Inno part # INXB123-130, # INXS200, and # IN75FR for if you have a naked roof.
    view full answer...
  • Which Roof Rack Will Work On My 2020 Jeep Cherokee With Black Factory Roof Rails?
    That is not a dumb question at all; this is not a very common situation. I do have a solution for you, but unfortunately the Malone AirFlow2 Roof Rack # MPG215 and Malone AirFlow2 Roof Rack # MPG216 will not fit your 2020 Jeep Cherokee because the factory raised black rails on your roof are actually wider than the silver rails. These crossbars are only wide enough to fit the dimensions of the silver roof rails. For a similar aerodynamic style crossbar setup that will fit your black roof...
    view full answer...


< Previous
123. . .20



Do you have a question about this Roof Rack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Test Fit:
Zack K
Employee Colin H
Test Fit:
Colin H
Employee Hayden R
Test Fit:
Hayden R
Employee Brent H
Test Fit:
Brent H
Employee Ed W
Test Fit:
Ed W
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Adam E
Test Fit:
Adam E
Employee Clayton O
Test Fit:
Clayton O
Employee Robert O
Test Fit:
Robert O
Employee Evangeline M
Test Fit:
Evangeline M
Employee Bradley B
Test Fit:
Bradley B
Employee Matthew B
Test Fit:
Matthew B
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Video by:
Robert C
Employee Jacob H
Video by:
Jacob H
Employee Thomas T
Video by:
Thomas T
Employee Ethan H
Video by:
Ethan H
Employee Cooper S
Video by:
Cooper S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Daron K
Edited by:
Daron K
Employee Jonathan S
Written by:
Jonathan S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.