Securing cargo is quick and hassle-free with these bolt-on tie-downs. Mounting brackets hold the straps at a 45-degree angle for easy access and operation. Quick-release, self-retracting design simplifies loading and unloading. 1,400 lbs Max load.
Features:
Specs:
Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
The included brackets and hardware let you permanently mount the 1" wide ratchet straps to any flat surface. And the mounting brackets are angled so that the tie-downs are tilted at 45 degrees. This angle allows you to position the tie-downs around obstacles on the trailer frame, floor, or walls. It also makes it easier to pull the straps out and operate the ratchets.
CargoBuckle's third-generation tie-down straps simplify the securing and unloading of your cargo. They have a self-retracting design, so there is constant tension on the strap and minimal ratcheting is required to secure your load. Dual safety locks keep the ratchet arm in the open or closed position, so the ratchet will not accidentally loosen or tighten up.
Instead of always having to find and store tie-down straps that hook to the anchor points on your trailer, you'll always find CargoBuckle straps right where you need them. Just pull up on the hook and strap, attach the hook to your cargo, and then operate the ratchet a few times. No more searching for a tie-down strap or dealing with extra webbing that flaps in the wind. And when you're ready to unload, simply push the release lever on the ratchet, free the hook from your cargo, and let the strap retract back down into the ratchet housing.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to review part number IMF1003745-77. These are the CargoBuckle G3 Retractable Ratcheting Tie-Downs with the angle mounting brackets. These heavy-duty retractable ratchet straps make it easy to secure your load when towing or hauling. They do tighten down quickly with the sure grip rubber-coated handle which makes it easy to grip and control with one hand. There is a push button release located right under the handle and when you push it; itll release the handle to move up and down. The ratchet also does have dual safety locks which are cut out on each side of the housing and which will allow you to put your handle in the lock position.
It also has a vinyl-coated steel S-hook which will help protect your cargo from any scratches. The ratchet does have a corrosion-resistant steel body. The strap is a seatbelt-quality polyester webbing. It is covered with a sturdy plastic housing and on the inside is a zinc-coated steel spring. The width of the strap is 1 inch length is 6 feet.
Does have a maximum load strength or breaking strength of 1400 pounds. The actual safe working load limit would be 1/3 of that, which is 466 pounds. This part number does come with a quantity of 2 ratchet straps, and the 2 angle mounting brackets, and the mounting hardware. The angle mounting brackets will allow you to permanently mount to your truck bred or trailer frame. It can be mounted on the wall or on the floor.
And what it will do is it will allow the ratchet to raise up at a 45-degree angle, which will make it easy to reach the handled ratchet, and it keeps the strap in a nice straight position. It does include the mounting hardware. And I just want to give an example of how the ratchet strap actually works. What you would do is pull up on the release and put the handle all the way in the upright position, thatll allow the strap to stand out. It does retract back automatically.
So once you would hook your S-hook to your tie-down point, it keeps tension on the line which will keep it over your cargo. When you push the release button, move the handle down to your ratchet position. That will allow you to ratchet up and tighten your strap around your cargo. One you get it tight, just pull up on the release, move it to the lock position and thatll lock everything in place, keep your cargo secure. When it comes time to remove your cargo, push the release and move the handle all the way upright position, thatll release the tension in the strap. Remove the S-hook from the tie-down point. Your strap will retract back into your housing. These parts do have a 1 year limited warrantee. And that should do it for part number IMF103745-77.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.