Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you're having trouble finding just the right weather stripping for your RV slide out, this will get you a custom fit. This wiper includes a track for a C-channel bulb seal in the height you need. Easy installation with peel-and-stick adhesive.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this 30-foot-long stick-on rubber wiper seal for your RV slide-out. Now I do wanna zoom in just to show you the cutaway or cross section of the seal itself. This is a rubber wiper seal with a track right here and it's used to prevent water from leaking into your slide-out on your RV. The wiper seal flexes in or out, depending upon how the slide is moving. This is ideal for the 2010 Big Horn by Hartman fifth wheels and other RVs.
Now this is compatible with the C-channel bulb seals, which we sell separately. Those bulb seals will slide right onto this track and they'll seal against the RV when the slide-out is closed. As I mentioned, we do sell them separately. They use part number SR84FR, or the SR37FR. And again, they're sold separately and they're usually listed on this product page as a related product.
Now, the rubber on this is highly wear- and weather-resistant. It'll protect the RV from extreme weather in the pest. And if you notice on the bottom, it is a peel and stick installation, has a nice pre-applied 3M adhesive backing. You just simply peel off the backing paper, and then apply the seal to the RV frame surrounding the slide-out. Dimensions on this, again, we mentioned it is 30 feet in length.
The overall width on the seal from one end to the other is two 1/2 inches wide, and this seal is made in the USA. But that should do it for the review on this 30-foot-long stick-on rubber wiper seal for your RV slide-out..
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Perfect fit! As usual, E-trailer had what I needed at a good price, very fast shipping!!! Reason why I buy all my trailer parts from them, makes it easy to keep my customers happy.
I couldn’t find an exact replacement for my 13 year old RV, but this seal was close enough to get the job done. etrailer came through again! Thanks!
Fast shipping and great fitting
Nothing on the market compares to the quality of this wiper. Thicker rubber. Much better than factory. Gave me a great seal that will last for years. I will buy again.
Exactly what I needed! Next order I’ll pay for shipping. USPS barely made it to me. I needed the product for an upcoming trip.
The track you sent would not accept the bulb seal i purchased. Installed a little less then 14 feet and had to take it back off and snap it into place. Would like to return the other 15 feet to you for credit. That way you can see what I'm talking about.
Product was a bit too wide but made it work!
A week after installation, when I re-opened the slideroom, the wiper was curled up and was not touching the top of the slide room. A day later it still hadn't regained its shape.
Etrailer was fantastic. My order was promised for Wednesday but did not arrive until Saturday until 2:10 pm . Either don’t promise or change delivery people
The process of ordering from beginning to end as well as delivery was outstanding delivered ahead of schedule and I’m very satisfied so far. I have not installed the slide seal yet, but it looks exactly like what I ordered. I’m very satisfied.
Jerry B. was extremely helpful and patient, finding me the correct replacement parts I needed for my 5th wheel RV slide out seals
The quality is far superior to the cheaper products found on amazon
fast delivery, product is exactly as advertised and is a perfect fit from our original weather stripping when we purchased the travel trailer new.
Excellent service and great customer support.
Recommend Etrailer for all purchases.
Upgraded from OEM RV seal. ForestRiver used nails to hold the weather strip in place. It took two men & a boy to remove nails without damaging the wall of RV.
Haven’t finished installing the outer slide in seal yet.
RV company’s don’t care how they build them-Just get the doe and let it go.
Great product
Great quality
Product is as ordered, communication is excellent.
Very easy to install. Hardest part was of course the prep work.
These are very thick and stiff. I am having trouble with getting these to wipe back and forth with slide opening and closing.
I replaced one of my slide wipers with this product. The original seal had deteriorated and turned to goo. It was the original seal from 2013 and was made by AP Products which was used by Forest River. This seal appears more sturdy and was easy to cut and install. We will have to see how it performs over the original.
I bought these wiper seals for my cedar creek fifth wheel. After installation I tried to slide my slides in and they tried to cock from one done to the other and did not come in smoothly or completely. These are made out of a different type of rubber that is very stiff so they don’t fold into the slide while moving slide in. I am out the price of a 30’ roll and cannot return because I used part of it. Beware of Steele wiper seals
Katrina D.
2/27/2024
I hope it's not that it's too thick, but instead just sticking when trying to slide the slide. I'm thinking that it may just be sticking, which Tire Talc, which is just pure talcum powder may be the way to go. If you apply some to a rag and wipe it on the surfaces of the seal that slide on the side of the trailer, then it should help keep the rubber from sticking when sliding in and out. Now, don't go rummaging through the nursery for baby powder, thinking that it will work. Contrary to popular belief, baby powder is no longer guaranteed to use pure talcum powder. Some body powders have replaced talcum powder with cornstarch; so I'd say just stick with the tire talc.
Great product. The tracks point out, where the original pointed toward center of slide seal, therefore we were unable to slide in the part that covered screws. We just applied caulk over each screw head to protect bubble seal. Part is for 2017 Tiffin 34PA.
Do you have a question about this RV Slide Out Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
10/25/2022
I contacted the manufacturer about this and here are a few tips from them for optimal application. When applying any of our peel n stick products using ThreeMs all weather adhesive tape, it is necessary to thoroughly prep the surface. All dirt, oil, grime, previous adhesive has to be removed. Squeaky clean. The tape, when applied, should be applied within a specific range. This is what ThreeM recommends Optimum application temperature is fifteen degrees Celsius through forty degrees Celsius or sixty through one hundred and four degrees Fahrenheit . The temperature difference between the parts to be bonded and the bonding surface should be as small as possible. In order to achieve the optimum adhesion level, the minimum requirement is that both part and body surface should be in the optimum application temperature range. Finally, after applying the taped product to a clean surface, within the recommended temp range, even though it is a tape, ThreeM does recommend a Cure Time. Especially for weather stripping that will experience sheering forces, like wiper seals. It is best to think of the all weather tape as a glue or cement in tape form. The shortest time recommended is one hr. through a full day twenty four hrs. is optimal.