To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Nothing throws off confidence like feeling the rig lean through corners. The 1-5/8" diameter rear anti-sway bar ties the axle to the chassis, balancing weight transfer so the vehicle stays level when you turn or change lanes. The thick 4140 chromoly steel construction gives it high torsional stiffness—nearly 30% more sway resistance than standard setups—so it feels more planted and predictable on the road.

Crosswinds and passing traffic can push you around, but this setup keeps things steady. Mounting to the rear axle and frame, the bar uses the axle’s weight to brace the chassis and limit side-to-side movement. That means less steering correction when wind, road crown, or uneven surfaces try to move you off line. The result is a smoother, more controlled ride that makes long drives a lot less tiring.
This isn’t built from mild steel. The 4140 chromoly alloy is harder and stronger than the standard 1020 steel used in many stock systems. Polyurethane bushings replace soft rubber ones, resisting wear from oil, gasoline, and ozone. They hold shape better and keep the bar working tight and consistent year after year.

You don’t need to drill into the frame or hunt down extra parts. The kit comes with heavy-gauge mounting hardware, lube for the bushings, and clear instructions. It bolts on cleanly and is engineered to avoid interference with most common aftermarket suspension add-ons, so you can upgrade stability without reworking the rest of your setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Roadmaster rear anti-sway bar for vans. Now this is a custom fit part. It is designed to fit the 1997 and newer Ford E450 vans. And on a custom fit part like this, I always like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show you if this part will work for your application. Now this anti-sway bar will minimize side-to-side movement to improve overall stability of your vehicle. It'll help let you execute turns and quick maneuvers with confidence.
It allows for a nice level ride, even on irregular surfaces. And it'll even help reduce driver fatigue because it'll minimize the effort that's required to keep your van in line.It will diminish effects of any cross winds, passing motorists, shifting cargo, and the bar is designed to fit your vehicle and work in conjunction with its suspension system. Basically it will attach to the rear axle and into the chassis. It uses the weight of the axle to brace your frame as it shifts and turns, and it is engineered to avoid interference with most popular after market add-ons and accessories.It is made with the polyurethane bushings, instead of the standard rubber variety, for a longer lasting system. The polyurethane is durable and resistant to damage that can be caused by oil, gas, and ozone.
And of course, less wear will mean inaudible 00:01:14 given the system and better support. The bar itself is constructed of a thick 4140 chrome moly steel for superior strength. The bar diameter is 1-5/8". This part will include everything laid out here on the table, the sway bar, the two end links with polyurethane bushing, the two polyurethane bushings with the clamps, all the heavy gauge mounting hardware to install it. They even give you a nice tub of bushing lubricant to install the lubricant on the bushings when you install them, and a nice set of detailed instructions that will describe how to install everything.
And this part is made in the USA.But that should do it for the review on the Roadmaster rear anti-sway bar for vans.
Customer Satisfaction Score:
73% were satisfied with this product
27% of customers were not satisfied
Ratings & Reviews

Fred
8/15/2026
Excellent it works great


Gwendolyn Y.
4/8/2025
No more white knuckling! That's awesome to hear, Kris. I'm glad that this bar helped so much so you can have a more relaxed drive :)

Kris
3/17/2026
I have taken a few trips with the Clatter Cabin now. It’s been enjoyable to drive. Since then I have replaced the exhaust from the engine back with 2 12 inch pipe. I was able to get the pre bent exhaust parts over the axle and clear your rear sway bar nicely. Now she purrrrs!

Kate F.
9/24/2025
Install looks great Steven! I can't wait for you to take it out for a spin so you can see the difference for yourself, it is amazing what a upgraded sway bar does to your ride, no more white knuckles for you, or your wife. What big stops do you have planned on your trip to the West Coast?

Ken
8/19/2025
No complaints with the handling. This is a good sway bar!

Jenny N.
6/25/2024
What I recommend is touching it up with a rust resistant paint like Rustoleum. We will be in contact with you about the damage. Please keep an eye on your email.

Leonard
6/22/2025
After a year and many miles I would give it a five star for sure. Made a great improvement over the stock anti-sway bar. With the rear and front RoadMaster anti-sway along with the RoadMaster steering stabilizer the E-450 33 foot class C motorhome drives like a dream. I highly recommend these three products. If not all at once then this order, 1st rear anti sway bar then 2nd front and then the steering stabilizer with the spring on it.

Dan K.
4/22/2026
wondaful! highly recommended.

Gwendolyn Y.
4/28/2025
High-five on the install, Curtis! Also, thanks for sharing all the pictures and showing all the angles of the sway bar. They are really helpful for anyone looking to tackle this install themselves at home!

Brooke M.
6/17/2025
So glad to hear that, Dimitrios! Thanks for including a photo, too.

Michael
3/25/2026
After a year the system is working great. It has made the driving much safer and smoother.


Gwendolyn Y.
3/7/2025
Sounds like a much smoother drive, Riley! I looked up your camper to see how tall it is and I can see exactly why its called a Bigfoot. What's been your favorite place you've traveled to so far with the camper?

Riley
3/6/2026
The two Roadmastercsway bars weve been using continue to impress and perform like they did on day one. Driving back across the country with some days having stiff criswinds continually we rode comfortably and never had handling or steering issues. I remain adamant that these are undoubtedly the best products on the market for this application and welcome any questions. For reference my truck is a 2018 F350 crew cab DRW, 6.7 diesel 4x4 long bed with Bigfoot 3000 series truck camper. Get the Roadmasters!

Kate F.
5/6/2026
Love this review Charles! It really is amazing the difference an upgraded sway bar, or adding a sway bar can do. Personally I think that every truck should come with a rear sway bar, it is sad that most do not now a days. Where did you go for your first trip?
Do you have a question about this Anti-Sway Bar?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Matthew
10/7/2026
This is a complete game changer when using a truck camper Mine is an Arctic Fox 990. I would list this under a must have accessory when using a truck camper. Unloaded ride when you hit off camber bumps is slightly rougher, but hey its a Ram 3500 dually for hauling heavy stuff. Also the performance when carving twisty canyons with an empty truck is astonishing....Watch out Corvetts, here I come!