Video Transcript for Review of B and B Molders RV Faucets - Kitchen Faucet - BM28WR

Hi, everyone. Steve here with etrailer. Today we're taking a look at this B&B Molders Coil Spring RV Kitchen Faucet. It's a single lover handle design in a nice matte black finish. Folks, this is gonna be a great upgrade, maybe a replacement, maybe just something new design-wise. As you can see, it's got this coil spring.

Makes it really easy to reach out and spray whatever you need to spray, and then go right back into place under its own power using that coil spring. So different kind of design. If you've never seen 'em, they're kind of unique. This is gonna be great at keeping this in place as you're traveling down the highways, down the side roads, maybe you're boondocking and those kind of things. It does feature a watertight, maintenance-free disc inside of here.

So whenever you turn this off, you're not gonna worry about drips and those kind of things. And of course you got your hot, cold. They are laser etched in the side of there, H and C. And the nice matte black finish just gives it a nice finish as far as looks. I do always like to give some dimensions, just to give you a lot more confidence this is gonna work in your area.

So I wanna start off with the height. I'm gonna go from the deck height to the top of the coil spring. Now keep in mind, obviously, I can pull that down and make it lower or higher. On this faucet I have in the studio, it's all, you know, right there where it is. So keep that in mind.

I got about 19 and a quarter inches tall. And then from the center to the center, I'm right at nine inches. So hopefully those two measurements gives you enough confidence and show you this should work in the area you're trying to put it in. Now it is a single hole installation. You can see I got the threaded parts of the base beneath there. You've got a retainer ring with two screws on it. And then you have two washers under there, one's rubberized and one is metallic. You will need tile and tub caulks, sold separately, to complete the install. Of course, you got your standard half inch metal pipe threaded braided lines. One's got red hash lines for hot, one's got blue hash lines for cold. So again, pretty simple. I like how they marked those. I literally just did my personal kitchen faucet in my house a couple days ago and the lines were not marked on the line. They had a little paper sticker kind of like that. So it was easy to do too. But I do like that little feature they got on there. Just a little bit of touch that shows you the quality and the, you know, what they put into their product. So I really like that. And again, folks, you will need tile and tub caulks, sold separately. And again, you get the coil spring here, so you got spray nozzle here. You can make it spray out in kinda like a cone shape, or just your traditional straight spray, you know, just straighten down when you're doing your dishes or washing your hands and stuff. Well, folks, I think that's gonna wrap up our quickly look together. Obviously, this could spin around 360 degrees if for some reason you need it to or want it to. And traditionally the handle is installed on the right hand side as you're facing it. Now, if you don't wanna tackle this installation yourself, no worries. We do have lots of etrailer installers in across the nation. And all you have to do is scroll down beneath this video and the photos on the product page and find our install locator link. And then based on your zip code, we can help pair you with those trusted etrailer installers in your area. I'm Steven, thanks for watching, and have a great day.