TecNiq D18 Heavy-Duty 24" Scene Light - Premium 8,500 Lumens - 9-14V - White Housing

Video Transcript for Review of TecNiq Work Lights - D18 Heavy Duty 24 Inch Scene Light - TN36CR

Hi, everybody, Andy here with etrailer. Let's take a quick look together at this TecNiq D18 heavy-duty 24" scene light. Now, if you're looking for a serious scene light that is going to give you wide, even illumination, this 24" premium LED light is built to perform. As I was trying to show you, there, this is built with a 30-degree tilt, so this is going to shine the light exactly where you need it without the hassle of having to use brackets or mounts, adjusting it that way. As you can see, I do have this on my power supply, and it's bright even with my bright overhead studio lights on here. But let me go ahead and turn those lights off just to give you a better idea of how bright this is.

Performance-wise, you're getting 297 LEDs. They're gonna put out 8,500 lumens, all running on 9 to 14 volts DC. And I'm gonna give you some measurements of the light, but I just really wanted you to see how effective this is going to be in dark settings. And my studio is pretty much completely in the dark, here. So, this is doing a great job of shining not only this area of my studio, but of course, my tabletop as well.

Let me go ahead and turn my studio lights on, and then I'm gonna give you a closer view, here, try not to blind you, just so you can see. And let me go ahead and turn the power supply off. And I'm gonna go ahead and get my tape measure, here, just to give you some measurements so you have a good idea of the size. I mentioned it was 24" long, so let me confirm that with you, here. End to end, as you can see, indeed, we're at 24".

And then, the overall height, let me get my ruler for these smaller measurements, we are going to be right at about, pretty close to 3 1/2". And then, the depth might be a little bit trickier. Let's say right at about, maybe about 1 5/8" deep. And this is rated for a 50,000 hour lifespan. The housing is constructed of heavy-duty aluminum.

As you can see, this is white in color. The fully sealed and water, this is fully sealed, rather, and water resistant, so this is going to be ready to handle tough environments. Inside the FR-4 circuit boards are gonna stand up to heat and vibration. That's going to, in turn, give you long-lasting reliability. Wiring's gonna be pretty simple. It uses a two-wire hookup. The black wire is gonna be power, the white is gonna be ground, and this is about 8" long, end to end. And this is going to mount easily to most flat surfaces. You'll need to use four #10 screws. This does not include those screws, so that's something you would have to pick up separately. But if you happen to have any other questions, whether it's about this light or anything else that we have here at etrailer, don't hesitate to reach out. We wanna make sure that you're getting everything that you need. Well, again, my name is Andy. Thank you for joining me.