Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This white-tinted replacement fits 14" x 22" openings, seals tight with included sealant, and holds up to sun exposure to keep your RV dry and comfortable.
When your RV skylight cracks and starts leaking during a storm or you notice water stains forming around the opening, the repair becomes urgent because water doesn't wait. This replacement comes with polycarbonate-safe sealant for installation, so you can apply a continuous seal on the roof surface and finish with a watertight barrier over the flange and fasteners. Once it's installed correctly, you're not chasing drips or watching water work its way into the roof.
A big part of replacing a skylight is confirming the opening size when the old unit doesn't provide clear measurements. This one is sized for a 14" x 22" cutout, with complete outer flange dimensions of 17-1/2" x 25-1/2", so you have the key measurements before removing the old unit from the roof. That lets you confirm the fit before removing the old unit so you're not stuck mid-project with the wrong size.
Sun-baked plastic is usually what sends people shopping for another skylight in the first place. This one uses UV-resistant polycarbonate that stands up to sun exposure without cracking or discoloring. Over time, that gives you a skylight that keeps its shape and appearance instead of turning brittle and worn after living on the roof.
Sometimes the problem isn't just a broken skylight, it's dealing with harsh sunlight and heat building up inside your RV. This white-tinted skylight helps reduce glare and manage heat while still allowing natural light into the space. The low profile 4" bubble height raises the skylight above the roofline, allowing light to enter from more angles so your RV still feels bright and open during the day.
Get a waterproof install using the included sealant approved for use with polycarbonate plastic. Carefully remove the old skylight, then clean and prep the roof surface so it's dry and debris-free. For additional sealing, you can apply butyl tape (sold separately) along the flange before setting the skylight in place. Secure it with screws (1" zinc or stainless steel screws not included), then seal over the flange edges and fasteners to create a watertight barrier that holds up over time and helps prevent leaks from turning into costly roof repairs. There is an install kit with screws and an additional tube of sealant sold separately (SR76RR). If you'd like help installing your skylight, check out our Installer Locator to find an installer near you.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Specialty Recreation 14-inch by 22-inch Low-Profile Replacement RV Skylight in the white color. Now replacing your skylight should not be a regular job. This one here is built to resist sun damage and lasts for years. Helps keep your RV protected from leaks and exposure.
It is made from a UV-resistant polycarbonate. It'll hold up against the sun without cracking or discoloring. This one you can see is a white polycarbonate, so it will soften the light for a nice, comfortable interior. Now this exterior skylight will fit a standard 14-inch by 22-inch cutout. Now it uses that cutout to fit, but it also, if you notice, has a size of 25-and-a-half inches wide by 17-and-a-half inches 'cause of the extra flange that's put on the end, how you're gonna install it.
Now, the overall height on this, if we measure from the bottom to the very highest point, is four-and-a-half inches tall. Now once this is installed, it's gonna sit flush against the roof, so it'll seal securely when it's paired with this included self-leveling sealant here. Now it does require small screws. If you look at the edges, you'll see there's the screw holes. It'll require small screws for installation.
Now the screws are not included. You would've to supply that. And the screw holes, they go all the way around four sides. They're about three inches apart. Now this is a rigid design and if it will stay put, there's no warping or lifting between the screws after installation.
Now this one we mentioned is in a white color. This size is also available in other colors. You get it in a clear or you can get it even in a smoke color. But that should do it for a look at this Specialty Recreation 14-inch by 22-inch Low-Profile Replacement RV Skylight in the white color.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
4/1/2025
I appreciate your insight Thomas, this is valuable feedback! Even with the hole issue, I'm glad you were able to get this installed and seal the deal. Looks like you’ll have the perfect view once the weather cooperates, keep those positive vibes shining through :)