Love to DIY? Use this rail kit, a trim kit (sold separately), and plywood bottom (not included) to build a tray that perfectly fits your cargo compartment. And you can easily slide these rails out of your RV to grab your camping gear.
Features:
Specs:
Additional parts you may need:
Pair this rail kit with a tray trim kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper. This is perfect for you if you're a DIY'er or if you have a uniquely shaped compartment that wouldn't fit a pre-made tray. You can slide the rails out so you can easily grab camping gear without needing to crawl into your cluttered or cramped compartment.
Determining Which Rail Kit You Need
To figure out which rail kit you need, measure the overall inside length of your cargo compartment. The measurement you get is the maximum length the rail kit should be, though you may need to go with slightly smaller rails to account for any potential clearance issues. For example, for this 48" rail kit, your cargo compartment shouldn't be shorter than 48" long. If your cargo compartment is shorter or longer, please reference the table below.
| Length of Cargo Compartment | Rail Kit You Need |
|---|---|
| 42" | LC370782 (42") |
| 48" | LC370783 (48") |
| 54" | LC370785 (54") |
| 60" | LC370787 (60") |
| 80" | LC370761 (80") |
| 90" | LC370762 (90") |
Determining Which Tray Trim Kit You Need:
The trim kit needed to complete your SuperSlide II is sold separately. To determine which trim kit you need, measure the width of your cargo compartment opening, and then subtract 4. This ensures that the tray would have the proper clearance as it slides in and out.
| Width of Cargo Compartment | Trim Kit You Need |
|---|---|
| 27" | LC370674 (23") |
| 28" | LC370676 (24") |
| 31" | LC370678 (27") |
| 34" | LC370680 (30") |
| 36" | LC370682 (32") |
| 37" | LC370684 (33") |
| 40" | LC370688 (36") |
| 41" | LC370690 (37") |
| 43" | LC370692 (39") |
| 48" | LC370755 (44") |
| 52" | LC370757 (48") |
| 55" | LC370759 (51") |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors and friends. Steven here with etrailer.com. Thank you for joining me today while we take a look at our Rail Kit for the Kwikee SuperSlide 2 RV Storage Slide Out Tray Assembly. This particular one is a 48-inch long option. So folks, when it's fully assembled, the slide out would look something like this image on your screen. Keep in mind that's an older image.
The sides are black like you see before me here on my table. Not gray like the image. That's an old image. So again, I apologize for that. But the whole assembly would look something like that when it's installed.
Now, this rails here do have the option of sliding out all the way up to 48-inches in length, and they are fully supported all the way out there at that end. And then they simply slide back, and you're gonna hear 'em lock into place here. (metal clanking) Once they get to the back. And then that's gonna keep them from sliding back out when you're going down the road and stuff. Now, you will need to pair these rails with a tray trim kit that's sold separately, and also a carpeted covered plywood that's also not included for your base.
Now, the carpet's optional. I highly recommend that just because it's a nicer, cleaner look. And it just keeps stuff from kinda sliding around as well with that carpet. You also would need obviously the hardware to mount these and to mount that plywood onto this kit, and that's all sold separately too. I wanna throw an image up real quick of the tray trim kit.
So, this is a chart. The same chart you can find on this product page. And the trim kit is needed to complete the SuperSlide 2, and again, the trim kit's sold separately. Now, to find out what trim kit you need, you're gonna measure the width of your cargo's compartment opening. So, we've already determined in this case it's a 48-inch long or deep or possibly deeper, but it can't be any shallower than 48. Now you need to know the width. So, you wanna measure the width, and then subtract 4 inches. So, let's say yours was 55 inches wide, subtracting 4 would give you a 51-inch wide trim kit. Now what that does, that 4 inches taken off ensures that the tray has the proper clearance. That way it can slide in and out without having any chance of hitting the sides, getting caught up on things or whatnot. So as you can see from that chart, you can go from 27 inches all the way up to 55 inches wide as far as the cargo compartments. So again, that is sold separately. Now, I wanna zoom in here and show you how this mechanism works. You have a spring loaded lever here. You heard it lock in the back. More importantly, you got these rollers down here on this bottom part. That is what, when I unlock this push down, that is what this whole apparatus is rolling on. They can't see it, but on the backside of this piece, there's also two rollers that this rolls on as well. And down here (metal clanking) you can kinda hear me spinning it there I hope. But this whole roller just rolls down, and then when it gets to the end, again, if it was fully assembled, it would actually lock out here. And then when you pull the lever again, it's gonna release that, lets you go all the way back in (lock clicking) and then lock into place. As you can see, it's all heavy duty steel. It's been powder coated to prevent rust, corrosion and those kinda things. And it's an easy bolt-on installation inside of your cargo compartment. Now again, you're getting the inner and outer rails here included. That's it. So again, you're gonna need the tray trim kit sold separately, plywood, and all the hardware. Now when this is fully assembled, it can hold an impressive 800 pounds. And again, that's the full slide out, would be able to hold the 800 pounds. Now, only one side of these has this locking mechanism 'cause again, once you have this whole complete kit installed, obviously these two sides would be attached. And when you pull this side out, that side would obviously slide out in unison with it, and then lock back in when you got back to the back. Just like that. Well, folks, I hope this information's been helpful for you. With this kit, you're gonna be able to store camping, hiking, gear, tools, anything you need, possibly generators, whatever you need to slide inside those cargo compartments. And it also helps eliminate you crawl deep inside to reach in a dirty or cramped compartment. You can simply just slide it out and access it all with ease. I'm Steven. Thanks so much for watching. Have a great day.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
1
Just received the product. It appears to be robust and good quality. I have not installed it in my RV yet.
Very sturdy, just what we were looking for to add a pull out box to a survey truck. Box screws on and the rails bolt to the bed of the truck.
These rails are exactly what I need for my specialized application - a coffin slide mechanism for a crypt-themed escape room. They arrived on time and in good condition. They are bulletproof and appear to be well made. My application will need a slide that can function again and again many times a day for years to come. These slide rails look to be a great place to start. I got great service from order to receipt of product... I would definitely order from this vendor again!
Included 1 page instructions were focused on building a platform and not clear on slide rail insertion method into fixed rail.
Very good product and a great company to work with even if you have issues with a product they try to make it right
These are great! Super strong I’ve been using them for a year now for a couple of generators.
Great product! Very well made. I used them to build a custom sized storage drawer in the back seat area of my work truck. This allowed me to use the maximum amount of space to store my battery powered tools in the cab, preventing further damage being stored in the service bed. If I need more slides, you will get my business!
Do you have a question about this RV Cargo Slide?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.