See what our Experts say about this Camco RV Vents and Fans

• Comparison of Camco # CAM40453 and MaxxAir # MA00-933069 RV Roof Vent Covers
  Both roof vent covers, Camco part # CAM40453 and MaxxAir part # MA00-933069, have the same purpose and fit on any standard 14 by 14 inch roof vent. Both of them allow you to keep your vent open during rain without water getting inside your trailer. The Camco is slightly smaller at 18-1/2 by 18 inches compared to the MaxxAir at 19 by 18-1/2 inches. The Camco is also about a 1/2 inch shorter in height measuring 8-1/2 inches versus the MaxxAir at 9 inches. With that being said I prefer...
  view full answer...
• Difference Between Fan-Tastic FVU1400GRS and FVU1500GR Fan-Tastic Vent Covers
  The only difference is the roof vent models that each cover fits. The Fan-Tastic # FVU1500GR is meant to bolt right up to Fan-Tastic vents with part numbers beginning with "FA" or "FV". The # FVU1400GRS is meant for model number fans beginning with "DF". Either can be used with a standard sized 14-1/4 by 14-1/4 vent by either screwing it into the side of the vent or by using existing screws. The Camco # CAM40453 is more of a universal fit item, and wouldn't take advantage of the mounting...
  view full answer...
• Recommended Replacement Vent Cover for Fan-Tastic Vent on RV
  The Camco vent cover is not intended to work with the Fan-Tastic vents, so I am sorry that you had someone install an inefficient and less than ideal product saying they were compatible. You should have had the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FRinstalled instead. It comes in the black mentioned as well as white # FVU1500WH. This cover does not use a screen but instead utilizes the screen of your vent itself. Obviously, the cover needs to be installed in the...
  view full answer...
• Is Camco Vent Cover Compatible with Fan-Tastic Vent Fan?
  The Camco RV and Enclosed Trailer Roof Vent Cover # CAM40453 is compatible with all standard size roof vents including the Fan-Tastic vent fans like # FV801250. I've attached a video of the installation to assist.
  view full answer...
• Replacement Vent Lid for Dutchmen Aerolite Travel Trailer
  I have attached options for the more commonly seen vent lids used on manual opening roof vents. This is rounded dome style by VentLine in white # BV0554-01, or in smoke # BV0554-03. If you have not previously replaced a vent cover/lid I have attached a couple of useful how-to video. In addition I suggest consider installing an enclosed trailer roof cover such as the # CAM40431. These vent covers lets you keep your RV roof vent open at all times, letting in light and air while keeping...
  view full answer...
• What is the Difference Between the MaxxAir and Camco RV Vent Covers
  Both the MaxxAir Standard RV and Trailer Roof Vent Cover part # MA00-933066 and the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen part # CAM40431 are designed to fit 14" x 14" roof vents. The overall dimensions of the MaxxAir is 19" long x 18-1/2" wide x 9-1/2" tall and the overall dimension of the Camco RV is 18-1/2" long x 18" wide x 9-1/2" tall. Both of these roof vent covers come with mounting hardware and have a removable louvered vent for easy cleaning....
  view full answer...
• Will Camco RV Trailer Roof Vent Cover # CAM40453 Stand Up Well to Sun
  The Camco RV and Enclosed Trailer Roof Vent Cover # CAM40453 referenced in your question actually features a durable polyethylene construction that is designed specifically to stand up to harsh UV rays. This will do a nice job of resisting the damage you experienced with your previous cover. This cover will fit any standard 14 inch x 14 inch roof vent and will allow you to keep your roof vent open at all times. The louvered screen can also detach for easy vent access and cleaning. I have...
  view full answer...
• Can a Camco Vent Cover be Attached to a Roof Vent with a Plastic Frame
  Your roof vent may have a metal frame with a plastic shell around it so that is worth taking a look at. If it is all plastic then attaching cover # CAM40453 directly to the roof would be more secure. I do recommend sealing up the holes. You can use silicone sealant such as # 0160297.
  view full answer...
• What is the Standard Roof Vent Size Opening and Are They All This Size
  There is a standard vent size opening which is 14" wide x 14" long but not all of them follow this rule so you will need to measure to be sure. The Camco RV and Enclosed Trailer Roof Vent Cover part # CAM40453 fits the standard 14" wide x 14" long roof vent opening. This cover will allow you to keep your vent open at all times even in inclement weather. I have attached a review video of the roof vent cover for you as well.
  view full answer...
• How to Prevent Water From Leaking Inside of Trailer Vent Lid
  Well, the vent cover, part # CAM40453, isn't going to repair your vent lid that won't completely close but it will stop water from leaking into your trailer. With this cover you can actually keep your vent lid open all the way during rain or shine, or even while traveling.
  view full answer...
• Replacement Vent Cover Needed for 2019 Jayco Jay Flight Travel Trailer
  In order to know what vent cover you need on your 2019 Jayco Jay Flight Travel Trailer, it truly depends on the size of your vent opening. For instance, if you have the industry-standard 14" x 14" size, I recommend the Camco vent cover # CAM40431 (white) or # CAM40453 (black). In order to make sure this is the size of your opening, I recommend measuring your opening to make sure. Both of these vent covers have overall dimensions of 18-1/2" long x 18" wide x 8-1/2" high to compare with your...
  view full answer...
• Vent Cover for a Fan-Tastic Vent with Powered Lift
  Fan-Tastic Vent actually has a vent cover. Take a look at # DMC38FR. It was designed to work with all Fan-Tastic Vent trailer roof vents. There is also a white version # FVU1500WH. Assuming the cover mounting surface is no lower than the vent mounting surface you should have no problems with the lid opening all the way.
  view full answer...
• Does Camco Vent Cover # 40453 Come with Hardware?
  The Camco RV and Enclosed Trailer Roof Vent Cover # CAM40453 does come with the installation hardware needed. This will include the screws, washers, lock washers, and nuts. I've attached a review video as well as the installation and maintenance video to assist.
  view full answer...
• Compatibility of Camco Vent Cover with Powered Lift Vent Assemblies
  The power lift vent fans like the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift # V2119-1-533 will absolutely work well with the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40453. The cover will not interfere with the powered fan or the powered lift function of the vent assembly. The cover will simply mount over it and attach to the base of it to allow uninterrupted vent use in rain or even while traveling. I've attached a...
  view full answer...
• Is There Replacement Hardware for Camco RV and Enclosed Trailer Roof Vent Cover
  Hey David, thanks for reaching out! The Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40453 unfortunately doesn't have any mounting hardware replacement kits available. You'll either need to purchase a whole other vent cover kit, or you can try visiting your local hardware or home improvement store to see if they have anything that will work for you.
  view full answer...
• Recommended Replacement Roof Vent Cover for a FanTastic Vent
  Jeff, it does not look like it. This cover is designed specifically to fit a 2015 and newer MaxxFan and MaxxFan Plus roof vent with mounting tabs. Since you have a FanTastic Fan, then I'd recommend going with the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40453 instead. This cover is designed to work with standard 14" x 14" roof vent openings, measures 18 1/2" L x 18" W x 8 1/2" H, and is a smoke color.
  view full answer...
• Do you Carry Replacement Mounting Hardware to Mount a Camco Vent Cover?
  Hello Gail, I am very sorry that you are running into this issue. I do however have some good news for you, the Replacement Zero-Leak Mounting Hardware Kit for MaxxAir Standard Roof Vent Covers # MA00-225000 will work for you Camco vent cover. I am also attaching pictures of the hardware that is included, I know the Canada standard can be pretty high, so maybe you can source them local at a Rona, or Home Depot. Please let me know how things work out. I am sorry for the delay on answering...
  view full answer...
• Will Camco Roof Vent Cover Fit Over a Fantastic Fan
  The Camco Roof Vent Cover, part # CAM40453, will fit with any standard 14 by 14 inch roof vent. So as long as your Fantastic Fan is the standard size it'll work for you.
  view full answer...
• Does Camco RV and Enclosed Trailer Roof Vent Cover CAM40453 Fit Over Existing 14 x 14 Roof Vent
  The Camco RV and Enclosed Trailer Roof Vent Cover # CAM40453 is a cover only, and it is designed and sized to work with standard 14 x 14 trailer and RV roof vents. This cover allows you to keep the vent open at all times, even when traveling down the road and when it is raining. The smoke-color vent cover measures 18-1/2 long x 18 wide x 8-1/2 high and it includes both a removable screen and mounting hardware.
  view full answer...
• Will Camco RV Trailer Roof Vent Cover # CAM40453 Work with Vent Fan
  Yes, the Camco RV and Enclosed Trailer Roof Vent Cover # CAM40453 will work if you have a vent fan. This is designed to fit any standard 14 inch x 14 inch roof vent and will let you keep the vent opoen at all times. The louvered screen detaches for easy vent access and cleaning and the durable polyethylene will stand up to harsh UV rays. The mounting hardware is included. I have attached a short video demonstration on this product that you can also check out.
  view full answer...
• RV Roof Vent Cover that Can Fit 1994 Dodge B359
  The Camco RV roof vent cover part # CAM40453 that you referenced would be a great option as it fits the standard 14 inch by 14 inch RV roof vents like you would have. This will allow you to keep your roof vent open at any time whether you are driving or if it's raining.
  view full answer...
• Fan Lid Vent Cover for Forest River Flagstaff Hard Side T21TBHWSE With Fantastic Roof Vent
  Only solution we'd have would be to remove your current roof vent and rotate it 180 degrees so that the opening faces the rear of the trailer so that you could install a cover like the Camco part # CAM40453 that you referenced and have the opening and vent of the cover face the rear like it would need to be.
  view full answer...
  
• Determining if Camco RV Roof Vent Cover Will Fit Vent on 2016 Carbon Toy Hauler
  The Camco RV and Enclosed Trailer Roof Vent Cover # CAM40453 that you referenced is a pretty universal product that should fit over the vent on your Carbon Toy Hauler as long as it's 14 inches x 14 inches. The cover itself measures 18-1/2 inches long, 18 inches wide, and 8-1/2 inches wide so I recommend taking a few measurements on your vent, both when it's closed and opened, just to make sure there won't be any interference. Unfortunately trailer manufacturers don't typically provide...
  view full answer...
• Can The Camco RV and Enclosed Trailer Roof Vent Cover Be Installed Off-Centered
  Installing the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40453 a little bit off center shouldn't be a problem since the shape of the cover doesn't taper down too much on the sides. You'll still want to have the cover facing the correct direction though. A lot of RV vent covers with this design don't allow the factory vent cover to fully open any way so you will have no issues with it not fully opening if it ends up touching the cover due to it being...
  view full answer...

Do you have a question about this RV Vents and Fan?