Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Specs:
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers (sold separately) to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
Ratings & Reviews
Got me just what I needed and fast! Thank you’
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
Hyundai Sonata - glass pano roof. These items have been on for about 1-year. So happy with the set up. I’ve take a road bike and a mountain bike on 500+ mile trips. The mounts do an excellent job.
I ordered the Yakima "aero" bars , baseline towers, and BaseClip kits for my 2019 Honda Civic 5 door. While expensive the quality is excellent and it was a pleasure to assemble such a high quality and precision engineered product. It fits perfectly on my new car and the "aero" bars are quiet even at freeway speeds. Highly recommended.
Great service from my knowledgeable salesperson and the product installed easily and performs perfectly.
The racks are easy to remove and reinstall once they are set up. My only complaint is that Yakama only seems to make the base clips in one length. This limits the distance that I can separate the bars to 32 inches. They don't reach under the door sill if I move them further back. If they stamped them out in a few different lengths one would have more options in terms of distance between the bars.
3 years ago etrailer helped me to fit Yakima racks on my Honda Accord so that I could carry my kayake.
I got a new Honda Accord this year and only had to replace the baseline towers and can still use the other parts.
It was pretty easy to install with good directions.
I ordered these as part of a complete roof rack kayak carrier system. Everything else was great, but this box arrived (within a larger box with other components) somewhat battered, and obviously re-taped shut.
Clearly, it was a return, and it never been inspected. Pieces of the baseclip components were missing from the box.
I contacted etrailer, and it took about 20+ minutes to arrange shipment of a new set, even after having sent several images of the box and incomplete product.
They sent a replacement, which arrived a few days later. But I purchased and paid for brand new products, and was VERY disappointed to receive a returned, incomplete set.
Excellent fit and held solid on my '23 Ford Maverick pick-up for the entire canoeing season. When removed this Fall there was no sign they were ever there.
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of eTrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
I have a 10th gen Civic sedan and I was dying to get the perfect roof rack set for my car. At the time of my purchase there was not many visuals of what the rack system looked like on this car.
I purchased the:
•Yakima 50in Jetstream crossbars
•Yakima baseline towers
•bc182 & bc183 clips
•Yakima 46in fairing
Overall I love how it looks on my car! During This COVID pandemic I have been camping more, and this is the perfect foundation! First off, the 46in fairing is the perfect fit for the 10th gen civic! Wind noise is low also with the help of the aerodynamic crossbars. My main concern was the fuel efficiency. On long road trips I still average 38-40 mpg with the rack on. My daily commutes I average 34 mpg without Econ on.
Now that was fast, the go to place to find unique, hard to get and out of stock items for your RV, Camping and Trailering needs. Awesome service and work everyone.
It arrived just fine, and timely. Thank you, e trailer has always had great customer service
I'm a repeat customer at etrailer several times now, and with good reason. They have provided what I needed in terms of both product and assistance reliably and promptly. The best online supplier I have found.
The clips are very easy to install and good fit on my 2020 Ram 1500.
Rack is still on the car one year later. Yakima doesn’t have a replacement cover for the tower, which is flimsy.
I was able to use these clips to mount a roof rack and roof box on my Audi that had a naked roof, and they did the job! I took it on a 1,200 mile road trip and after I returned there wasn’t any damage to the paint, and even though there are rubber inserts on the inside of the clip to prevent scratches I was still a bit surprised.
If you don’t have roof rails on your car, these definitely help!
I was able to use these clips to mount a roof rack and roof box on my Audi that had a naked roof, and they did the job! I took it on a 1,200 mile road trip and after I returned there wasn’t any damage to the paint, and even though there are rubber inserts on the inside of the clip to prevent scratches I was still a bit surprised.
If you don’t have roof rails on your car, these definitely help!
I was converting a roof rack from my Jeep Cherokee (factory rails) to my RAM 2500 truck (naked roof). While I could use my old Jetstream crossbars, I needed new towers and clips for the truck. There was an error in my original order, the representative thought she was sending me two pairs of clips. I understand the mixup because the Clip box said two meaning 2 clips rather than two pair. etrailer sent another pair immediately and waived the shipping. I like customer service is available and knowledgable. I would give them a five if they hadn't mixed up the first order.
Customer service was excellent, they called me to tell me one item was backordered and how long it would be. Package was shipped with enough packing material. Install was pretty easy, some of the Yakima measurements in the manual are a couple inches off but no big deal. This will be used to carry a box for when the family takes trips. Can pile all the luggage up top and have more room in the car. I would recommend the Yakima corebar roof rack and etrailer! Their price was lower than 2 other sites I checked.
My roof rack was for my Prius V. Following all directions, the roof rack went up fine and fits tightly...no worries there. And, the rack just seems too far forward because it slopes down. I can probably adjust this out by widening the front slightly and pushing the whole rig back maybe 6" to a foot.
Basically, it is a workable rack and salvages parts from an older rack. It does what I want.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeffrey S.
6/7/2020
after a year and helped along by customer service, I realized I had made a measurement error in setting up my racks. Fixed the error and the racks work like they were supposed to. Good work by customer service hanging in there with me.