See what our Experts say about this Yakima Accessories and Parts

• Replacement SuperLatch, Lock and Key for a Yakima SkyBox Roof Mounted Cargo Box
  The Replacement SuperLatch Handle kit, part # Y8880348 will include everything you need to replace both handles and comes prepackaged with a pair of matching SKS locks and keys that you can replace the existing. In this case, I do recommend a complete replacement to ensure there wasn't any damage to the other latch that isn't entirely visible or could become a problem later on. If you just want to replace the lock without replacing the SuperLatch handles, you'll a Yakima SKS Change...
  view full answer...
  
• Difference Between Yakima Replacement Shanks
  The difference between the two parts are the Yakima racks they accommodate and the parts they include. Replacement # 8890343 is designed for use with Yakima HighLite bike racks, whereas replacement # 8890340 is designed for use with Yakima DoubleDown Ace bike racks. Each comes with the shank adapter, anti-rattle knob and safety lanyard, though # 8890340 also comes with a control key, 8 mm screw, wrench and pull pin.
  view full answer...
• Which Replacement Hitch Pin Will Fit My Yakima Holdup 2 Bike Rack
  To replace the threaded hitch pin and lock for your Yakima HoldUp, it will depend on if you have the 2" shank or if you have the 1-1/4" shank with a 2" adapter. For the 2" shank, you will need the Replacement Hitch Bolt and Clip for Yakima HoldUp # Y8890200. If you have the 1-1/4" shank with the 2" adapter, you will need the Replacement Hitch Bolt and Clip for Yakima HoldUp # Y8880129. These are not cross compatible with each other so I do recommend double checking to make sure before...
  view full answer...
• How To Pick Out Matching Yakima Lock Cores for Yakima Roof Rack
  Yes, if you can get the number stamped on your current Yakima key you can pick out replacement lock cores to match that number. You'll then need to just search our site for the part number Y8771-XXX where the X's equal your key number and you'll see the matching lock core. For example if you had key number A135 you'd need the lock core part # Y8771-A135. Now to install new lock cores you need the control key part # Y8007835. Insert this into the new lock core and then slide the core into...
  view full answer...
  
• Replacement for Missing Key on Yakima DoubleDown 5 Hitch Mounted Bike Rack
  In order to obtain the key number, you'll have to have a locksmith pick the lock (if it's locked), then use a # Y8007835 Yakima control key to remove the lock cylinder. On the outside of the cylinder, you'll find the lock number, as shown in the provided photo. Once the lock is removed, if it's not damaged you can simply order a replacement key. For instance, if you discovered the lock number was A152, you'd order the # Y8772-A152 replacement key. The part number for the correct key would...
  view full answer...
  
• Replacement SpeedKnob and Lock Core For Yakima Ridgeback Bike Rack With A135 Key and Lock Core
  Yes, the Replacement SKS Lock Core # Y8771-A135 will fit in the SpeedKnob and Wedge Assembly # 8880508 for the Yakima RidgeBack Bike Rack # Y02457. You will need the Key # Y8772-A135 if you do not already have the Yakima A135 key.
  view full answer...
• Recommended Locking Brackets for Yakima Mega Warrior Basket and Lock Cores for A135 Yakima Key
  For your Yakima Mega Warrior # Y07080, the locking mounts you are looking for are the Yakima Locking Mount Brackets with SKS Cores # Y07064. These come with cores already installed and unfortunately are keyed at random. You will need the Replacement Control Key for Yakima Same Key System # Y8007835 to remove the cores to put the specific core number in to match your keys and other cores. The A135 lock cores you are seeking are part # Y8771-A135.
  view full answer...
• Replacement Yakima Lock Cylinder for Key Number A135 Or A150
  Yes, for the replacement Yakima lock core that will match your A135 keys, you will just need the Replacement SKS Lock Core # Y8771-A135. If you have the A150 keys that you also mentioned, you will need the Replacement SKS Lock Core # Y8771-A150. As you referenced in your question, you will also need the Control Key # Y8007835 to remove the existing lock cores and insert the new one.
  view full answer...
• Yakima Locks for Addition to Replacement Awning Clamp Assembly 8880737
  Yes, Yakima's Replacement Awning Clamp Assembly # 8880737 can be fitted with an SKS Lock Core to make it lockable. For a single core you can use # Y8771-A135, along with matching key # Y8772-A135 and Control Key # Y8007835 which is required for core installation. For a set of 6 matching SKS cores, two standard keys and the Control Key use kit # Y07206.
  view full answer...
• Replacement Speed Knob Recommendation for Yakima FullTilt 5 Bike Rack
  We have just what you need for your Yakima FullTilt 5 bike rack. The part you need is the # 8880508 which is the replacemenet speedknob and wedge assembly that includes a change key to swap out your old lock core and install it in this. If you can get me the key number off of your old key I can set you up with the correct lock core for it. For example if you have key number A135 the lock core you need is the part # Y8771-A135.
  view full answer...
• Can Yakima SKS Kits Be Keyed To Specific Key/Core Numbers?
  Hi David! I do have an option for you, but the SKS kits (like the Yakima Same Key System (SKS) Lock Cores (QTY 8) # Y07208 you found) are not able to be keyed alike to specific key/core numbers, unfortunately. So with that, said, check out the part numbers I have below: Replacement SKS Lock Core for Yakima Racks and Carriers - A135 # Y8771-A135 (key # Y8772-A135) Replacement SKS Lock Core for Yakima Racks and Carriers - A143 # Y8771-A143 (key # Y8772-A143) Replacement SKS Lock Core for...
  view full answer...
• Replace Missing Key on Yakima SkyBox Roof Cargo Box
  The only way to determine the key number would be to drill out one of the lock cores, remove it so it's more or less intact and get the lock number that's engraved of the outside of the core. The problematic thing here is getting the lock core removed without completely damaging it. If you can successfully do that, please reply with the lock number and I'll get you the part number for the replacement lock and key. Honestly, your best bet would be to have a locksmith drill out the locks...
  view full answer...
  
• Can The Yakima HitchLock Come With Matching Keys
  The Replacement Body for Yakima HitchLock 2007 and Newer # 8820048.and The Replacement SKS Lock Core for Yakima Racks and Carriers - A135 # Y8771-A135 are what you need for your key to match. I attached a review video link below.
  view full answer...
• Replacement Yakima Lock Core For A Yakima Key A143
  The Replacement SKS Lock Core for Yakima Racks and Carriers - A143 # Y8771-A143 is the lock core that you will need per Yakima. This lock core allows you to replace a missing SKS lock core or add a new one to your Yakima carrier or accessory.
  view full answer...
• Keying a Yakima SuperLatch Replacement Kit for a Skybox Cargo Carrier
  I have a solution for you, but unfortunately the SuperLatch kit, part # Y8880348 isn't able to have the SKS Lock specified when ordered, so you'll need to buy the cores to match your existing SKS Key individually. To do this, you'll search the site for "Y8771-XXXX" where XXXX is the code that is printed on your existing SKS Lock Cores and Key. These come as single units, so you'll need two to re-core your new SuperLatch kit. For instance, if your lock and key has the code "A135," you'll...
  view full answer...
• Yakima Lock Cylinders with Key Number A135
  For Yakima lock cylinders for A135 keys you'd need the part # Y8771-A135. For a key you would want the part # Y8772-A135 if you needed more. For a control key you would need the part # Y8007835.
  view full answer...
  
• Replacement Lock Core Recommendation for Yakima Racks to Match With Same Key
  I believe you have Yakima racks and are looking for a way to match all of the lock cores. This is definitely possible but what you'll need to get me is the key number that's used for the locks you want to match all of your racks. With that I can pick you out the correct replacement lock cores. How it would work is you would insert the Yakima Change key part # Y8007835 into an unlocked lock core and you'd be able to remove it. Yakima replacement cores are available as part Y8771-_ _ _...
  view full answer...
• Replacement Key, Change Key and Core for Replacement Body for Yakima HitchLock
  The part # 8820048 is a replacement body for a Yakima HitchLock. The lock core and keys are intentionally not included as odd as that sounds. This would be for someone who has a good lock core and key and just needed to replace the body. If you a lock core you'd want the part # Y8771-A135. Then for the correct key for this you'd want the part # Y8772-A135. You'll also need a change ket too, part # Y8007835.
  view full answer...
• How to Add Matching HitchLock for Yakima OnRamp Bike Rack
  The lock core on your Yakima OnRamp Bike Rack # Y96FR won't have the key number visible (as it's on the side of the lock cylinder) but if you look at the keys that you received with the rack you should see a number on them. If you order just the Replacement Body # 8820048 for the Yakima HitchLock you can then order a lock core that matches what you have as well as the Control Key # Y8007835 that you need for installing the cylinder. To get the correct cylinder you can either search for...
  view full answer...

Do you have a question about this Accessories and Part?