1-800-940-8924 to order Yakima accessories and parts part number Y8772-A135 or order online at etrailer.com. Free expert support on all Yakima products. Great prices and Fastest Shipping for Replacement Key for Yakima Racks and Carriers - A135. Accessories and Parts reviews from real customers.
WARNING: This product may contain Phthalates and Antimony Oxide which are known to the State of California to cause cancer. For more information, visitwww.p65warnings.ca.gov
Customers compare Y8772-A135 to these similar products
The Replacement SuperLatch Handle kit, part # Y8880348 will include everything you need to replace both handles and comes prepackaged with a pair of matching SKS locks and keys that you can replace the existing.
In this case, I do recommend a complete replacement to ensure there wasn't any damage to the other latch that isn't entirely visible or could become a problem later on.
If you just want to replace the lock without replacing the SuperLatch handles, you'll a Yakima SKS Change... view full answer...
Worst case scenario, I am going to assume that the hitch lock is the only Yakima lock that you have that used that key. If this is the case you will either need to have a locksmith pick the lock or you can try drilling it out. In this case you would then have to replace the lock with part # Y07235.
If by chance you have another lock which used the same key and it is in the unlocked position, you could use Control Key, # Y8007835, to remove the lock core and obtain the number listed on... view full answer...
The difference between the two parts are the Yakima racks they accommodate and the parts they include. Replacement # 8890343 is designed for use with Yakima HighLite bike racks, whereas replacement # 8890340 is designed for use with Yakima DoubleDown Ace bike racks. Each comes with the shank adapter, anti-rattle knob and safety lanyard, though # 8890340 also comes with a control key, 8 mm screw, wrench and pull pin. view full answer...
Yes, if you can get the number stamped on your current Yakima key you can pick out replacement lock cores to match that number. You'll then need to just search our site for the part number Y8771-XXX where the X's equal your key number and you'll see the matching lock core. For example if you had key number A135 you'd need the lock core part # Y8771-A135.
Now to install new lock cores you need the control key part # Y8007835. Insert this into the new lock core and then slide the core into... view full answer...
In order to determine which key will work on your Yakima Sky Box, you'll need to first find the number on your lock core; this number will be either on the front of the lock core, or on the body of the lock core. You'll need to remove the lock using the universal change key to check the body of the lock core for a number, which can be done with the Yakima Control Key # Y8007835.
Once you've located the key number, which will be a 3 digit number with the letter A in front of it, you can... view full answer...
In order to obtain the key number, you'll have to have a locksmith pick the lock (if it's locked), then use a # Y8007835 Yakima control key to remove the lock cylinder. On the outside of the cylinder, you'll find the lock number, as shown in the provided photo.
Once the lock is removed, if it's not damaged you can simply order a replacement key. For instance, if you discovered the lock number was A152, you'd order the # Y8772-A152 replacement key. The part number for the correct key would... view full answer...
Yes, the Replacement SKS Lock Core # Y8771-A135 will fit in the SpeedKnob and Wedge Assembly # 8880508 for the Yakima RidgeBack Bike Rack # Y02457. You will need the Key # Y8772-A135 if you do not already have the Yakima A135 key. view full answer...
I have a solution for you, but unfortunately the SuperLatch kit, part # Y8880348 isn't able to have the SKS Lock specified when ordered, so you'll need to buy the cores to match your existing SKS Key individually.
To do this, you'll search the site for "Y8771-XXXX" where XXXX is the code that is printed on your existing SKS Lock Cores and Key. These come as single units, so you'll need two to re-core your new SuperLatch kit. For instance, if your lock and key has the code "A135," you'll... view full answer...
For Yakima lock cylinders for A135 keys you'd need the part # Y8771-A135. For a key you would want the part # Y8772-A135 if you needed more.
For a control key you would need the part # Y8007835. view full answer...
Yes, Yakima's Replacement Awning Clamp Assembly # 8880737 can be fitted with an SKS Lock Core to make it lockable. For a single core you can use # Y8771-A135, along with matching key # Y8772-A135 and Control Key # Y8007835 which is required for core installation. For a set of 6 matching SKS cores, two standard keys and the Control Key use kit # Y07206. view full answer...
The part # 8820048 is a replacement body for a Yakima HitchLock. The lock core and keys are intentionally not included as odd as that sounds. This would be for someone who has a good lock core and key and just needed to replace the body.
If you a lock core you'd want the part # Y8771-A135. Then for the correct key for this you'd want the part # Y8772-A135. You'll also need a change ket too, part # Y8007835. view full answer...
Info for this part was:
Written by:
Tyler C
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Brian T
Installed by:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.