Replaces 1 mirror-polished stainless steel wheel cover on the rear of your vehicle. Fits a 19-1/2", 10-lug wheel with 10 hand holes. Hardware included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this replacement, stainless steel, rear wheel cover for the 19 and a half inch diameter, 10 lug wheels. And this is for a quantity of one cover. Now this replacement wheel cover will fit over a wheel on the rear of your vehicle. It is a nice low profile, aerodynamically designed and covered.
It'll deliver a nice sleek look on your vehicle. It is made of a 304 stainless steel construction, very sturdy and rustproof, and you can see has a nice mirror finish, gives you a nice clean eye-catching shine to your wheel.Now it does come with all the mounting hardware you need for installation. Nice set of instructions. And this model does include a retention system that'll firmly hold the wheel cover centered on your wheel, preventing any wobble.Basically, when you go to install this, what you do is go to the rear axle and you'll remove two of the axle nuts from the axle hub that are across from each other. And then you'll install this rear bracket.
These holes on rear bracket will go over those two bolts. And then re-install the two axle nuts to hold this rear bracket into place.So with this being on your hub, now, then what you'll want to do is on the wheel cover, you'll see this little center cap in the middle here. You can actually pop that out. There's three prongs on it. So if you pop that out, then you'll have access to the center of the wheel cover.
And you'll notice the two holes here. So what you're going to do with this being mounted onto your hub, and then you put your wheel cover onto your wheel. This'll line up pretty much just like that. And then what you'll do is take this anti spin bracket and put it through the two holes on the wheel cover. And then those two holes will line up with the two holes that'll be on your bracket, just like that.And then with it on there, then you just take your screw, this longer screw, and then you'll go ahead and put it through there and tighten it down and tighten it all the way till the wheel cover doesn't move.
And then with it all tightened up, all you'll have to do then is just take your cap, line the holes up. Once you get the holes lined up, then just pop it into place and that'll cover the installation brackets. You can't even tell how it's installed. So it's a very simple installation, very easy to do. Comes with all the hardware and brackets you need, and as I mentioned, a nice set of instructions.Now these lug covers right here, they also can be popped out. There's just four prongs on those. You can pop those out, if you need to access the lug nuts.A few specs on this again. The application, it fits 10 lug wheels. The wheel diameter it fits is 19 and a half inches. Now this will not fit an eight lug wheel or the older split rim design wheels. And it is for a quantity of one wheel cover. And if you notice the design, it has the 10 hand holes all the way around.But that should do it for the review on this replacement, stainless steel, rear wheel cover for 19 and a half inch diameter, 10 lug wheels.
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
Ratings & Reviews
These are hard to find item and awesome. Thank you etrailer. Metal not plastic!
Good fit . Worked as described. Spoke with Chat rep. And they also assured it would fit, it did. Would purchase from etrailer in the future.
Everything arrived early and as adverti sed
Thanks Amy for being diligent and the
essence of quality control. The wheel covers fit perfectly. Happy New Year to you and your crew.
It is an exact match of existing wheel covers. I question the fit. I have not had a chance to drive the motorhome to date after putting it on the rim. I took the help of two other individuals to put the wheel cover on. (My wife has been ill.) my concern is that it stay on the rim when I hit a bump or encounter rough roads.
If it stays on RV wheels!!!!!
The quality of the product is "ok" but.... this wheel cover is designed to fit 16" and 16.5" wheels apparently. Well, my wheel is a 16". I could not get the wheel cover on so I went to my local tire dealer who did get it on for me but... it does not fit well. It does not go flush on to the rim. This is probably because it is designed to also fit the bigger 16.5 rim. The fit does not look good and I doubt it will stay attached for very long but it did make the 8 mile trip home. There should be a separate wheel cover for each size - 16 or 16.5". The tire store was not real impressed either with the fit. Basically they said "good luck".
Didn’t fit. Being returned. The shipping to return it cost more than the item itself.
Fits tighter than previous same wheel c overs
Fit like a glove sparkles like an old bumper. Now, if I can just keep it so it doesn’t fly off again very happy with each trailer.
Website is very easy to navigate and it only took a minute to find the wheel cover.
I think customer service is great. Within an hour of placing my order I received an email stating order was processed and waiting UPS pickup. Had it not been for the weekend delivery would have been within three days.
This is the second time I had to buy a wheel cover for my Class C RV because service techs fail to properly replace it after dual tire pressure check. Wheel cover looks great and I can attest that the fit is snug and secure.
This is a replacement wheel cover for the 1 I lost. Great to see that after 15 years, this replacement is just as good as the older ones.(product not cheapened up over the years as some manufactures tend to do to save money)
I had a hard time trying to fit it in the wheel rim. The thickness of the metal is very thin and prone to warping and bending. The holes with the retainer bolt wouldn’t line up, it’s very hard trying to fit. Overall not high quality and the wait for shipping is way too long. The only good thing is it does match the old one. Probably made in China….
It was exactly what I needed at a fair price.
As is typical, shipped immediately, came 4 days sooner than expected. Another quality product, delivery
All good, thanks
It fits and looks great
Delivery was very good and fast and the fair shipping cost was what made me buy it.
Fit good look good customer support good. All around great experience!
Do you have a question about this Wheel Covers Hubcap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.