LockRack Watersport Carrier Base Set - 9-7/8" Wide - Channel Mount

Lockrack Accessories and Parts - LR56FR

Use this base set with your LockRack arms to transport small surfboards, wakeboards, or foils on the roof of your vehicle. T-Bolts and key set included.

Features:

• Base set pairs with set of LockRack arms (sold separately) to transport small surfboards, wakeboards, or foils
• Rubberized strip on top of base provides slip resistance and protects your watercraft from scratches
• (2) Bases, (4) T-Bolt sets, and a set of keys included

Specs:

• Base width: 9-7/8"
• 1-Year limited warranty

Fits:

• LR89FR: LockRack Short Arm Set for Watersport Carrier - with Rail Protector - Qty 4
• LR42FR: LockRack Replacement Short Arm with Rail Protector for Watersport Carrier - Qty 1

Holds a Variety of Narrow Watercraft


LockRack's watersport carrier has fixed base that works with ratcheting arms (sold separately), allowing you to carry a varitey of different watercrafts in your carrier. It can hold small surfboards, wakeboards, or foils, depending on the arms you use with the base set.

Secure Transport
This carrier provides a secure rooftop transportation system for your watercraft, without the need for side straps. The carrier's two sets of ratcheting arms firmly hold your gear in place on your way to and from the water. With most kayak carriers, tying down your watercraft can be a hassle because of shifting side straps. LockRack's design simplifies that process with its padded ratcheting arms.



Once your boat is loaded, push the arms in until they click into place, securing your board or foil to your vehicle. To further secure your watercraft, you can attach cinch straps from your board to the front and rear of your vehicle (sold separately).



If your vehicle doesn't have any tie-down points, you can get an anchor kit (sold separately), which will let you create anchor points in the creases of your vehicle's hood and hatch.

Collapses for Low Profile
When your LockRack is not in use, you don't need to uninstall the carrier from your roof. Just remove the arms, rotate them 90 degrees, then reinsert them so that they lay parallel with the roof of your vehicle. This will reduce wind noise and give you more clearance when parking in your garage.

Top Channel Installation


This carrier can be installed in the top channels of your crossbar with the provided hardware. If your crossbars do not have a top channel you can purchase an adapter set (sold separately: LR53FR) that will clamp around your crossbars. The adapters clamp around most crossbars.

Built-In Security


LockRack carriers have security built-in with locks in the ratcheting arms. Once your boat is loaded and you've pushed the arms in securing your gear, those arms will stay locked until you remove them with a key. To remove each arm put the key in, rotate it, and pull the arm all the way out so that it's easier to access your surfboard, wakeboard, or foil.



This carrier comes with 4 identical keys. Each key will lock and unlock your ratcheting arms. Not all keys work for all LockRack products. If you ever need a replacement key (sold separately) you'll need to know your original key number. You can locate the key number on the inside of one of your original keys.

Note: Arms and adapters pictured sold separately

LR56FR Lock Rack 25 cm Base Set - 2 Pack