Product Experts Available Now!
Call 1-800-940-8924
Replacement Roller Fairlead for Bulldog Winch ATV/UTV Winches - 4-13/16" Mount
(12 reviews)
Price: $31.28
Bulldog Winch
Replacement Roller Fairlead for Bulldog Winch ATV/UTV Winches - 4-13/16" Mount
$31.28
Retail:$44.15
You Save: 29%
Need help with installation?
Locate installers near me- All Info
- Reviews (12)
- Q & A (0)
- Videos (1)
- Photos
Bulldog Winch Accessories and Parts
- Electric Winch
- Fairleads
- Roller Fairlead
- Bulldog Winch
Replaces the roller fairlead for your Bulldog Winch ATV/UTV winch. 4 Rollers reduce friction and wear on your wire rope. Steel construction with zinc-plated rollers and black powder coated frame resists corrosion. 2,000 lbs - 3,500 lbs.
Features:
- Replacement roller fairlead for Bulldog Winch 2,000 lb - 3,500 lb ATV/UTV winches
- Fits BDW15001, BDW15002, BDW15005, and BDW15006 winches
- Compatible with wire rope only
- 4 Zinc-plated steel rollers reduce friction and wear on the rope
- Black powder coated steel construction is corrosion-resistant
- Mounting hardware not included
- Distance between horizontal mounting holes (center to center): 4-13/16"
- 1-Year limited warranty
Note: The roller fairlead does not mount directly to the winch - it typically attaches to tabs on the winch mounting plate (sold separately). Most aftermarket mounts include these tabs.
20055 Bulldog Winch Replacement Roller Fairlead for ATV Winch Replacementes - 2,000 lbs to 3,500 lbs
Item # BDW20055
Video of Replacement Roller Fairlead for Bulldog Winch ATV/UTV Winches - 4-13/16" Mount
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for All About the Replacement Roller Fairlead for Bulldog Winch ATV/UTV Winches
Today we're gonna take a look at the Bulldog Winch ATV Winch Roller Fairlead with the 122.5 mm mount. Now, this is a standard Roller Fairlead for ATV winches that have the 122.5 mm mounting holes, and that's measured from the center of each mounting hole right across, so let's switch to millimeters. There you can see 122.5 mm. These rollers are zinc plated, and the frame is a nice black powder-coat finish, and this Fairlead is designed to guide and protect your wire rope as it winds onto your winch drum, helps reduce the wear on your wire rope, and the vertical rollers right here on the side will help with any angled pulls. That should do it for the review on the Bulldog Winch ATV Winch Roller Fairlead with the 122.5 mm mount.
Ratings & Reviews
4.3
12 reviews
by:
Patrick
06/12/2019
Nice item. Great service and follow up. Thanks you guys!
by:
Troy
01/19/2019
The front part of the winch with the rollers is a great product. The one that came with the badlands winch was absolute junk, in my opinion. The one I ordered with my mounting brackets actually came apart rather easily for me to insert the hook and cable through and then re-secure. I had to do that because the hook on my cable is permanently affixed. Thank you again.
by:
Glen B.
01/13/2021
Product comes with 1 remote control stopped working they do not sell replacement.
by:
John
06/26/2018
When i ordered my measurements were in inches products description was in mm i figured 1 mm difference ivan file and make it fit. Pleasant surprise one mounting hole is slotted. Mounting was easier than anticipated Thanks for a wonderful product
by:
Delbert H.
12/19/2016
Keeps the cable rowed up and in line. Will use it pulling logs for the log splitter. I really like it. Works great!!
by:
William
01/18/2020
For those interested this is a quality product. Be prepared that for this model machine the oil cooler has to be removed and placed behind the frame, which everything is included to do so. Everything bolted up and fit nicely into place without any modifications. Very pleased with my purchase.
by:
Kurt B
07/27/2016
Exactly as pictured. Exactly matched dimensions stated. Worked as well as expected or actually maybe a little better than expected (for the low price.) Glad I did this.
by:
Don S.
03/24/2018
The problem I have with this is that it's smaller then I expected. My fault i didn't fully understand the description for this product.
by:
Dave
10/11/2019
Nice quality product. It bolted right on and looks nice.
by:
Alan
04/13/2023
Very easy to install.
by:
Roger
08/06/2024
by:
Michael
02/17/2021
12
12
true
See what our Experts say about this Bulldog Winch Accessories and Parts
- Roller Assembly Recommendation to Use as Spool Roller for WinchI may have a solution or you, but we do not have any spool rollers with a metal roller. Instead you might be able to use a fairlead from a winch like the part # BDW20055 as that basically is a roller setup with a metal roller.
view full answer... - How to Install the Bulldog Winch Mount BDW15144 on a 1998 Honda Fourtrax TRX300I reached out to Bulldog Winch about the Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15144 and they were able to provide me with the installation instructions which I have then attached for you. Please take a look over these and let me know if you need any further assistance. If you do not already have the roller fairlead then the correct one for this bracket is the Bulldog Winch ATV Winch Roller Fairlead part # BDW20055. If you need help wiring your winch as well I would...
view full answer...
- Recommended Custom Winch Mount for Honda 420 Rancher WinchThe Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15114 is a custom fit for your Honda Rancher TRX420 for 2007-2014(with independent rear) models. I've attached a video to assist. Another option is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15181 which is a fit for the Honda Rancher 420 from 2014-2017 straight axle or 2015-2017 independent rear. This mount fits only the 4-bolt mount winches. I've attached a review video of this product as well. With either of these...
view full answer... - Can a Synthetic Rope Be Used With a Roller Fairlead Superwinch Terra 45 SeriesFor your Superwinch Terra 45 Series ATV Winch part # SW1145220 you will want to use a hawse fairlead like part # BDW20089 for winches with a synthetic rope. You can still technically use a synthetic rope with a roller fairlead like the Roller Fairlead part # BDW20055 but it is not recommended as you run the risk of the rope getting pinched in the corners of the rollers and becoming damaged. In order to reduce abrasion on a synthetic rope you will want to use a hawse fairlead which is...
view full answer... - Small Roller Fairlead for a 5/8 Inch Diameter Pressure Washer HoseRoller fairlead # BDW20001 would be a good option for a 5/8 inch diameter hose. You don't want it to be too tight because it could restrict water flow some and I would expect the hose to expand some when there is water pressure inside pushing outward. I have included a link to a video review of this fairlead for you. Please note that this part has not been tested with a hose.
view full answer... - LT2000 Superwinch Custom Mount on a 2005 Kawasaki KVF 360 PrairieWe do not have a photo of the Superwinch LT2000 mounted on an ATV but I can confirm the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15120 is the correct fit for your vehicle. If this is the plate you have, then the Roller Fairlead # BDW20055 or the Hawse Fairlead # BDW20224 would be a great addition that will change the appearance as well as the function of your Superwinch LT2000.
view full answer... - Winch Mount and Fairlead for a 2014 Polaris Sportsman 550 and Superwinch Terra 25 WinchFor Superwinch ATV winch # SW1125220 you will need mount kit # BDW15151 to install it on your 2014 Polaris Sportsman 550. The fairlead is included with the winch. If you already have the winch but need just the fairlead I recommend # BDW20055.
view full answer... - Correct Mounting Plate for Bulldog Winch Roller Fairlead BDW20055I spoke with Bulldog Winch and they said that you need the Winch Mounting Plate part # BDW20056 in order to use the Roller Fairlead part # BDW20055. This will then all work with the Bulldog Winch Utility Winch part # BDW15008 on the Bulldog Winch ATV Winch Mounting Plate part # BDW20316.
view full answer... - Replacement Roller Fairlead for Bulldog Winch 10031I reached out to Bulldog Winch and found that you have two options for a replacement roller fairlead for your # BDW10031. The two options are the Replacement Roller Fairlead for Bulldog Winch # BDW20055 which has a gloss black finish, and the # BDW37FR which has a textured finish. I have attached some video reviews for your reference.
view full answer... - Bulldog Winch Custom Fit ATV Winch Mount Compatiblility With Runva 3.5P Mount DimensionsThe Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15159 is compatible with the standard mounting bolt pattern you find on a Runva 3.5P. You may also be interested in the Bulldog Winch ATV Winch Roller Fairlead - 122.5mm Mount # BDW20055 or the Hawse Fairlead # BDW20224 which will be compatible with this mount.
view full answer... - Wire Rope on Superwinch ATV Winch Spools LooseIt sounds like you need a roller fairlead and that might help with the spooling issues you are having. For winch # 1120210 use fairlead # BDW20055. Adding a little bit of a load while you are spooling the wire rope in will also be helpful to keep it taught so the rope can spool correctly.
view full answer... - Replacement Fairlead Recommendation for a Superwinch LT3000 ATV WinchThe recommended replacement roller fairlead for your Superwinch LT3000 # SW1130220 is the part # BDW20055.
view full answer... - Will Bulldog Winch Custom-Fit Steel Winch Mount Fit 2015 and 2016 Polaris Sportsman 850The Bulldog Winch Custom-Fit Steel Winch Mount, part # BDW15151 is designed to fit both years of your polaris Sportsman 850 ATVs. The fairlead is not included with this winch mount. For a roller fairlead you can use part # BDW20055 and for a Hawse fairlead you can use part # BDW20224.
view full answer... - Hole Spacing for Mounting Fairlead on Bulldog BDW15105 ATV Winch Mounting PlateThe Bulldog Winch # BDW15105 mounting plate does have mounting holes for a roller or hawse fairlead which are 4.8 inches apart on center. If that doesn't match up with the holes on your existing fairlead, Bulldog does offer some that are compatible. For the hawse fairlead used for synthetic rope, use # BDW20224, or for wire rope/cable, use a roller fairlead, part # BDW20055, both of which are compatible with the hole spacing of the # BDW15105 winch mounting plate. Bulldog confirms that...
view full answer... - SuperWinch LT2500 Compatibility with Bulldog Winch Mount for Honda RancherThe Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15107 along with the roller fairlead # BDW20055 or hawse fairlead # BDW20224 are a confirmed fit for your 04 Honda Rancher. The mounting plate will be compatible with the Superwinch models as they use standard mounting locations.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Michael H
Installed by:
Jeff D
Video by:
Joshua S
Written by:
Lisa S
Updated by:
Matthew S
Test Fit:
Ryan G
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.