Your high-pressure propane components need a hose between their 3/8" male flare fittings. This 10' hose joins those connections and gives you room to position the components farther apart.
When your high-pressure propane components are positioned several feet apart, a shorter hose won't reach between them. This 10' hose gives you the length to connect your equipment without rigid plumbing. The 3/8" female flare swivels on both ends connect to compatible male flare fittings, giving you a flexible connection between the two components.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steve here with etrailer. Today we're taking a look at this MEC propane hose with a 3/8-inch female flare swivel fitting. So if you're replacing worn out hoses or putting together an LP gas system for a new build, this will give you some flexibility because you've got 10 feet of line. So instead of trying to everything be right next to each other, this gives you plenty of room, plenty of hose to route those connections exactly where you need them. And again, each end uses a female flare swivel. So that means you can put a wrench on here and spin the end versus having to worry about spinning the hose.
And that's very useful, especially in tight areas and those kind of things. Now the flare connection itself is going to create a seal at the mating mail surface. That means you don't need any kind of thread tape or sealant on the flare itself, but you do always need to, as with any propane connection, test for leaks on those fittings before you put that system back in service. So we carry a propane gas leak detection fluid separately. It's MEC78TR, item number MEC78TR.
Use that leak test, make sure there's no bubbles, verifying there's no gas leaks at those fittings. So again, folks, whether you're replacing the existing line or adding the flexible connection to your propane setup, this will give you enough space in between stuff and enough space to route it around tight corners and in between walls and those things if you need to. So this again is the 10 foot long MEC propane hose. I'm Steven, thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.