Blazer LED Cube Light Kit - 20 Watts - Flood Light - Remote - 3-1/8" x 2-7/8" Cube - Qty 2

Video Transcript for Breaking Down the Blazer LED Cube Light Kit

Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Blazer Two Inch Cube 20 Watt LED Light Kit with the Remote, and it is for a quantity of two lights. Now, these two LED flood light cubes will produce 890 effective lumens each, of a nice bright white focus light for improved visibility and safety. Each light uses four 5 watt LEDs per cube to optimize the light output, and they use a high-impact polycarbonate lens that produces a clear, wide beam. Now, I do have this hooked up to some 12 volt power just to show how bright the light is, so we'll go ahead and turn on the power. And there you can see the lights come on.

Turn off the overheads and you can see how bright they are. Go ahead and zoom out just to give you an idea, if we turn one around, that's for one light. Go ahead and zoom back in. Turn off our power. Now, this does include a remote control.

This will let you run up to four lights, and the lights can be operated up to 100 feet away. On the lights themselves, they use a nice channel fin on the housing, and this will let the heat quickly dissipate to optimize LED performance, and they do use a breather valve to eliminate condensation and fog buildup inside the lens. They are a nice black powder-coated aluminum housing, and the brackets are all corrosion-resistant. We mentioned the tough polycarbonate lens. They are IP67 rated to protect against dust and moisture, and these can be installed anywhere with the included U-mount brackets you can see that are on them, and the mounting hardware.

And the wires on these, they are nine feet long, they're nine foot long in each one. These are a fast, easy installation. There's no drilling, no wiring, no switch, no relay. The compact lights will mount anywhere on your vehicle. We mentioned the U-brackets.

They give you a nice, sturdy mounting base, and what's nice is you can adjust them to whatever angle the lights you need it at, and then tighten it down. This is for a quantity of two cubes. Overall dimension of each cube, the height with it on the mounting bracket, it's gonna get you right about four inches tall. The overall width, side-to-side, about 3 1/4 inches. Total depth of it is about 2 3/4 quarter inches deep. Wattage again is 20 watts per cube, and the power draw is 1.1 amps per cube. But that should do it for the review on the Blazer Two Inch Cube 20 Watt LED Light Kit with the Remote.