To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your Ram 3500 and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Aiden here with etrailer.com and today we're going to be taking a look at the full set of custom fit WeatherTech mud flaps here on our 2022 Ram 1500 Classic. Now, like I said, this is the full set. So, we've got the front set right here and if we move over to the back of the truck, we've got the set for the rear, as well. This is going to be custom fit to match the contours of our vehicle here and be a no drill installation. So, it uses existing factory hardware to get a nice strong fit and provide that nice mud flap for our truck.
Let's check them out. These are made right here in the USA with a high quality thermoplastic resin. It's got a good thickness to it. If your truck is kicking up any sort of rocks or anything, I think it's going to hold up really well and most importantly, it's going to protect the truck back here from any of that debris flying up. These do extend down quite a bit, giving us pretty good coverage, especially compared to what was just sitting on the truck before, which really didn't give any coverage.
You can see here how they kind of match the contour of the truck right here, giving us a really strong fit all throughout. And it uses the existing factory screws, so we don't have to make any drilling or modifications to our truck to make these work. If you don't need the full set, you can just get the rear or the front on their own, totally up to you and what you need for your truck. But either way, they're both going to install the same way. Let's go over that process now.
Getting these installed is going to be really simple. You just want to identify the correct side. So, we've got the rear set here, and on the back here, it'll say LH right there at the bottom. It's pretty hard to see, especially probably on camera, but just look around this area towards the bottom and it'll say LH or RH. LH is for our driver's side here.
I'm just going to set that down and grab our 5/16th socket. And just remove the 2 screws here and up here on our vehicle. When you're removing these, just keep them nearby. You are going to reuse these later. Now, if you don't have this black trim piece like we do here, you can just go ahead and install the mud flap. But if you have this piece like we do, you want to just come down to the underside of that trim piece here, and we're going to take our Phillips head screwdriver and loosen up this screw here. This is part of a kind of push fastener, so we'll just loosen up that screw a little bit. And there's going to be 2 of those. So, we've got a second one more towards the rear of the truck here. Once you've got those unscrewed, you can take a flat bladed screwdriver or a trim panel tool to kind of pop these out just like that on either side. And then that will allow you to remove that whole panel and you can set this to the side, because we won't be reusing this. So, now we can take our mud flap and just line it up with the holes on our truck and reinstall those screws that we removed before. And then we can just retighten that down with the same socket that we used before. Once that rear one is done, they can go ahead and move up to the front set. It's going to be the exact same as that rear one. We've got those same 2 factory screws that we can find just on the inside of the wheel well here. And we'll just replace those and pop them in. And then we can repeat that process on the other side of the vehicle for the passenger side. And then you're done. You're ready to hit the road. And that'll complete our look and installation of this full set of WeatherTech custom fit mud flaps here on our 2022 Ram 1500 Classic. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (1379 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.
Good fit but could be a little wider still get spray on trailer
Mud flaps were very easy to install, but they only hang down about 6 inches. They will help minimize any rock chips on the truck, but not as well for the trailer's I pull.
Took less than 5 minutes per side. Fit great, no cutting or drilling.
Great product. Fits great, looks great.
Customer service is the best.
Thank you.
Paul
Awesome fulfillment service. Arrived faster than I thought. Easy ordering.
Great product at a great price, quick service
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
Great service item was shipped and received quickly. Mud flaps were easy to install.
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Fit my 2020 Honda Ridgeline perfect! Easy to install with easy to follow instructions. Match oem black plastic great. Really complete the look of truck. Very happy customer.
Weather tech always fits and looks good
Good quality. Arrived quickly
Easy to install.
I ordered a set of weathertech no drill mud flaps for my new 2022 Colorado and they fit great and easy to install. Well after a couple of weeks I put on GM flares so I had to order another set for flares. Same thing excellent fit and easy install. Quick shipping and good service.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave
2/10/2023
Worked as described. Could be a few inches longer