Fill your gas can up and attach this battery-operated pump to transfer fuel to your mower, boat, or ATV - no funnels, no spilling, an no heavy lifting. Auto sensor stops flow when tank is full.
Features:
Specs:
Note: Does not fit FMD gas cans. Not compatible with drinking water, thinners, solvents, hot liquids, acetone, benzene, creosol, ethyl, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, or sulfuric acid.
Includes 3 adapters that are tested and confirmed to a fit a variety of cans, most of which are pictured above. This pump was confirmed to fit: Briggs and Straton, Midwest Can, RotoPax, Jerry Can, Blitz and Scepter cans.
Secure the release cap at the top of the pump to create a seal before pumping. Manually pump until you see the liquid starting to flow through the tube. Transfers up to 3.2 Gallons per Minute.
Tighten the release cap to break the seal and stop the flow of liquid.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this TeraPump fuel transfer pump for gas cans. Now, this battery-powered pump's gonna let you transfer fuel from your gas can to your mower, boat, or ATV, so this is gonna be perfect to have on hand in your garage, shop, have it for yard work, have it at the farm, the docks, and even at the campsite. Now, this pump is going to work with non-corrosive liquids such as gas, non-potable water, kerosene, diesel, and light oils. And this is not going to be compatible with drinking water, thinner, solvents, hot liquids, acetone, benzene, creosol, ethylphenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, and sulfuric acid.
I think I got all of them. Hope I pronounced all of them correctly as well. Now, this pump will work with a variety of containers with the universal threaded adapter that you see here. So this should be able to work with most of your cans and containers. This does not fit FMD gas cans.
The intake hose is about 18 inches long, so you'll just put that into the container that you pull the gas out of, of course. And then this does have a locking clip on the discharge hose, so you're gonna be able to secure the nozzle just like that on the pump itself or on the receiving receptacle as well. It'll give you a hands-free experience in that way. Then when you're finished, this built-in holder is gonna just hold everything together just like that. So that's pretty convenient.
The discharge hose length, by the way, is a little over 39 inches long. This has a flow rate up to 2.7 gallons per minute. The power buttons here are water-resistant, and so it's gonna allow for easy operation as you can see. The auto-stop sensor, it's gonna stop the flow when the tank is full. You can see that right there.
And this is powered by four double A batteries, as you can see there. If you would like to pick up some batteries as well from etrailer, you sure can by using the part number DU58QR. Again, that's DU58QR. That'll link you to four AA batteries from Duracell and you can add that to your order if you so desire. This does meet the high safety standards. Instructions are gonna be included as well to make sure that you're using this the way that it has been designed. So overall, it's gonna be a very simple operation, but it's really going to have a bit of application, make your job of transferring fuel a whole lot easier. If you do pick this up, we'd love to hear back from you regarding your experience with using this, and so you can share your experience with us by dropping a comment or leaving a review on this product page. And if you have any other additional questions, don't hesitate to reach back out to us either by phone, chat, or email. We wanna make sure that you're getting exactly what you need. Well, I think that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Great service, quick delivery
It works good
Made of good quality material. Appears to be well designed product. Hopefully works as good as I expect.
Pump works great, a lot quieter than I thought it would be. It is so much easier than holding a 5 gallon can up and trying to get the spout in the hole.
Haven’t tried it yet the pump
Had purchased 2 - these work great -
Put two AA Batteries and it works well. No Spills
This is so much cleaner and easier than tipping the gas or diesel can
Do you have a question about this Fuel Transfer Pump?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.