Erickson Tightening Bar for Heavy-Duty Tie-Down Winches - 35" Long
(7 reviews)
Price: $35.20
In Stock
Erickson Tightening Bar for Heavy-Duty Tie-Down Winches - 35" Long
Item # E02803
Our Price: $35.20
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Videos (1)
- Photos
Erickson Lashing Winch - E02803
- Tightening Bar
- Erickson
Steel bar lets you tighten your heavy-duty flatbed winch. Tapered end and long handle ensures the leverage and grip you need to safely operate your winch.
Features:
- Tightening bar lets you safely operate your flatbed winch
- Designed for E52801, E52809, and other heavy duty winches (sold separately)
- Tapered end provides ample leverage while tightening
- Handle allows you to have a firm grip on the bar
- Durable steel construction
- Chrome finish
Specs:
- Overall length: 35"
- Handle:
- Length: 31-1/4"
- Diameter: 1-1/4"
- Tapered end:
- Length: 3-3/4"
- Diameter: 3/4"
02803 Erickson Manufacturing Heavy-Duty Lashing Winch Tightening Bar - 35" Long
Video of Erickson Tightening Bar for Heavy-Duty Tie-Down Winches - 35" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Erickson Lashing Winch - Tightening Bar - E02803 Review
Today we're going to review part number E02803. This is the Erickson winch tightening bar for 15,000 pound Erickson winches. This bar is designed to be used on the Erickson 15k truck and trailer winch, part number E52801 and the sliding winch 15k winch part number E52809. Both of those are sold separately and both of them are listed on the product page for this bar as a related product. The dimension on this, the diameter of the bar itself is an inch and a quarter in diameter and total length is about thirty-five inches long. Just to give you an idea I happen to pull a, this is the part number E52801, which is the 15,000 pound truck and trailer winch.
If you'll notice right here, you'll notice the holes in there and that's designed for your tightening bar to install right in there. You can use that for your bar to tighten your strap on your winch. That should do it for the review of part number E02803, the Erickson winch tightening bar for 15,000 pound Erickson winch. .
Customer Reviews
Erickson Tightening Bar for Heavy-Duty Tie-Down Winches - 35" Long - E02803
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
Steel bar lets you tighten your heavy-duty flatbed winch. Tapered end and long handle ensures the leverage and grip you need to safely operate your winch.by: Reynaldo 01/27/2023
Works great!
by: Daryl M. 04/20/2015
Good workmanship, friction ridges on tapered end, good finish. etrailer gave excellent service letting me know the status of the shipment every few days until it arrived. Would order from them again.
by: Randall04/07/2022
The bar is better then I expected it to be I'm very happy with it an can't wait to try it out.
by: Jesse 10/17/2023
by: Arthur 08/04/2022
by: John 05/23/2023
by: John02/20/2021
7
7
See what our Experts say about this Erickson Lashing Winch
- Total Length of the Erickson Winch Tightening Bar part # E02803 The total length of the Erickson Winch Tightening Bar part # E02803 is 35 inches.
view full answer...
- Recommended Replacement Converter for a Elixir ELX-45I have a solution for you but there isn't just a replacement converter section for the Elixir ELX-45. You're going to need to replace the entire panel with the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger item # PD4045KA. This is a 2-in-1 AC/DC distribution panel and smart charger that works with lithium-ion, flooded lead acid, AGM, and gel batteries. I have linked a review video below.
view full answer... - Straps for 15K Truck and Trailer Winch # E52801The straps that we recommend for the truck and trailer winch # E52801 are 25 feet long, # 4821HD-27F, and 27 feet long, # 4821XW-27F, but I would not go any longer than that. The tightening bar is sold separately, # E02803. Depending on how the winch is oriented it could be a left hand or a right hand. It would mount to a flat surface using the flat base so there really isn't a right side up. The mounting of this winch is situational so it is very versatile and should work well no matter...
view full answer...
Do you have a question about this Lashing Winch?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Mary K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.