Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 1,000 lbs
Item # EM07707
Retail:$879.94
Our Price: $840.91
You Save: $39.03
Confirmed to Fit
2022 Nissan Frontier
5 Foot Bed - with Utili-Track System
5 Foot Bed - without Utili-Track System
6 Foot Bed - with Utili-Track System
6 Foot Bed - without Utili-Track System
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Truck Freight Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (33)
- Q & A (0)
- Photos
- Used (1)
2022 Nissan Frontier - Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 1,000 lbs
- Truck Bed
- Fixed Rack
- Erickson
- No-Drill Application
- Over the Cab
- Fixed Height
This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds.
Features:
- Extended-length truck bed ladder rack lets you haul ladders, lumber, and more with ease
- Over-the-cab extension allows you to carry longer loads
- Front crossbar adjusts to accommodate different size cargo
- Side rails provide multiple tie-down points and extra load support
- Convenient tie-down cleat on each upright provides additional place to anchor your cargo
- Curved grab-handles on rear of rack provide extra leverage for loading cargo
- Aerodynamic design reduces drag and wind noise
- Easy installation with patented clamps - no drilling required
- Bed rail clamps are pre-drilled for optional permanent installation - hardware not included
- Universal system adjusts to fit most truck bed widths
- Sturdy steel construction
- Black powder coat finish resists corrosion, chips, and scratches
- Corrosion-resistant, yellow-chromate-plated hardware
- Compatible with bed liners and toolboxes
- Toolbox installation requires some modification on truck beds without bedliners
Specs:
- Weight capacity: 1,000 lbs
- Dimensions: 135" long x 54-13/16" wide x 32-7/8" tall
- 90-Day limited warranty
Notes:
- Due to the size of this item it ships via truck freight and only to the contiguous United States.
- Will not work with tonneau covers. If your truck has a bed liner some alteration may be required to properly install this ladder rack.
Over-The-Cab Ladder Rack
This Erickson ladder rack extends over the roof of your truck to maximize your carrying capacity. It has integrated side rails for load support and for tying down your gear. The extra coverage allows you to carry longer loads without having to worry about overhang. And the added surface area for cargo helps to evenly distribute load weight.
Easy, Clamp-On Installation
Sturdy, user-friendly clamps let you mount this rack to your truck bed without drilling or other modifications. Simply position the bases at the corners of the truck bed and clamp them to lips of the truck bed rails. Assemble the upper portion of the rack and attach it to the uprights, then bolt the uprights to the bases. The rack can be installed on short-bed or long-bed trucks.
There are holes in each bed rail clamp that allow you to permanently bolt the rack to your truck bed. Permanent installation will require drilling. Hardware not included.
If you are installing the rack on a truck bed without a bed liner, the bolts for the mounting clamps may cause interference when installing a toolbox. To install a toolbox on a truck bed without a bed liner, trimming of the clamp bolts may be necessary for the toolbox to sit flush on your truck's bed rails.
Load Support and Security
The ladder rack has integrated side rails that provide load support and multiple tie-down points for securing your cargo. A moveable crossbar in the over-the-cab extension helps provide extra support for the front end of a load. There is a convenient tie-down cleat on each of the rack's 4 vertical uprights to provide additional anchoring points for your truck's load. There is also a handle on each side of the rack at the rear to provide additional leverage and support for easier loading and for accessing that hard-to-reach cargo.
Sturdy Steel Construction
Steel is highly durable, maintains structural integrity, and does not age or decay as quickly as other materials. A black powder coat finish has been added to help resist corrosion, chips, and scratches, and to keep the rack looking new. The nuts and bolts have a yellow chromate plating that helps prevent corrosion.
07707 Erickson Universal Contractor Pickup Truck Bed Rack - Steel - 1,000 lbs
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Customer Reviews
Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 1,000 lbs - EM07707
Average Customer Rating: 4.6 out of 5 stars (33 Customer Reviews)
This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds.by: David10/17/2023
Great value full size ladder rack. Very impressed with the quality and how durable the steel frame is. 1-year in, haven't had any issues with rusting or loose bolts, which is what I have experience in the past from similar racks. Would highly recommend if you need a full-size ladder rack for a small to mid-size truck.
by: Chris 08/08/2022
Easy assembly and installation I had to modify the J-bolts or buy different ones for my bed, but they were readily available at the hardware store.
I use it for hauling lumber, steel, kayaks. It has been a terrific addition to my truck.
by: jcole03/18/2019
Used it for mounting roof top tent onto utility trailer.
Also used to attached water jugs, propane tank, water tank, cree lights, etc.
Also used to carry kayak and atv.
Rack is high enough from trailer to carry atv and still carry tent on top.
by: Stuart 01/25/2024
This is a quality built rack, fit precisely with little effort, will buy again when needed.
by: Robert 02/08/2024
2022 Ford Ranger
Very easy to put together, seems sturdy and well made.
by: Chris 02/07/2024
2010 Chevrolet Colorado
Easy Ordering and Fast Shipping
by: Don11/17/2022
Paint falling off rack in multiple area. Use is in the mountains, not due to roas salt.
Jenny N.
11/21/2022
You mentioned that the paint was falling off in places. I recommend using a rust resistant paint such as Rustoleum to touch up the rack.
by: Sue02/14/2019
2006 Ford F-150
This ladder rack has been great. Very sturdy construction, easy to put together, no issues with rusting, so the coating is holding up well. The only small issue we had with it is that it seems to sag in the middle where the front and the back join just a little bit. We can't quite seem to get it level. It's very possible that is due to how we put it together, but we can't quite seem to fix it. It wouldn't matter much except that we are hauling boats and having the cross bars be level with each other would be helpful.
Sue
2/18/2020
Still a great product! Has held up really well. Weve taken it off and put it back on multiple times. It takes 2 people to lift it off, but is extremely easy. Definitely a great product
by: Marty 07/07/2023
2012 Ford F-150
Easy assembly, heavy duty, and just a good product
by: Mel05/25/2021
The kit came timely, assembled easily and adjusted to my pickup with no issues. This is a sturdy product and I expect to get years of service from it.
by: Bryan S.09/10/2020
The process with etrailer was very easy and I received the items quickly. I've had the ladder rack for about a year. The rack has helped out and has save me a lot of money on delivery fees for 16'-20' length materials. I've had this thing loaded down and it worked great. I travel about an hour to the job site each day and do a lot of highway driving. Around town there isn't any difference but, on the highway, the rack adds a lot of noise which is expected. No complaints there but, just so you're aware. I think the only con I have is after about 6 months, I started to notice rusting around the welds and bolt holes. After about a year I am noticing more but, it appears to just be on the very surface so I don't see where it will affect the integrity of the load allowance. I'll probably end up getting an outdoor spray covering to spray over the rust spots after I sand them down before winter. One workaround that I had to do while installing the rack was in regards to my toolbox that goes across the front of the bed. I had to drill thru the inside of the toolbox so the bolts would slide thru. All in all this product has been worth every penny and, for me, paid for itself after about 3 months. I'd recommend it.
by: Tim S07/01/2017
Love the product, fits just about any truck and is easy to take off. The only thing I didn't like was the assembly instructions. Very hard to read and understand what went where.
Tim S.
7/3/2018
Works great. The Erickson ladder rack works great for my business. The only issue was understanding how to put it together, but once that was figured out I’ve had no problems with it.
by: Paul M12/11/2016
2012 NissanFrontier
This rack exceeded my expectations. The quality is second to none. Installation was quick and if required, removal is even quicker. Adding this rack to my Nissan Frontier has given me much more functionality and increased capability.
Delivery took a little longer than expected, but customer support at etrailer kept me informed and sought alternatives if I couldn't wait. I wouldn't hesitate to recommend this product or the good folks at etrailer to get it to you.
by: K.01/26/2018
Excellent build.
Sturdy ladder rack.
Easier to have 2-3 people assembling the ladder rack as opposed to 1 person.
Only issue is the rear top bolt may occasionally come loose, but that may be an error on my end.
5/5 star ladder rack.
by: Rick12/18/2018
We have 2 of this item on our trucks and they have been awesome! This has been an excellent product, build right and does what it is suppose to do... They are still looking as good as the day we installed them on our trucks... We will order more as the time comes that we need them! The company had lots of farther up emails along the way of ordering and after the product was installed. Great company to do business with.....
by: Justin 02/03/2022
2012 NissanFrontier
Fits my 2012 Nissan Frontier perfectly! I did have to remove the utilitrack system in order for the J hooks to install properly, but that’s a small sacrifice in order to have rack up top!
by: Junk06/17/2020
After owning it for a year I would highly recommend getting a single piece ladder rack. For the money this isn't worth it, it rusts at all welds and doesn't line up correctly. Spend the time and money on a one piece.
by: Mike06/29/2017
1971 Chevrolet C/K Series Pickup
Fits my 71 C10 great. Looks good and can carry everything I need. Best looking rack out there in my opinion
by: Charles07/31/2021
2015 Ram 2500
great
Charles
8/1/2022
great
by: Barbara 08/23/2022
Great product!
by: Vern 09/13/2021
Great rack! Strong! Installs pretty easy, might need one other person (I did it by myself).
by: Paul03/16/2018
There are a few rust spots already
by: Happy C01/06/2022
2004 Ford Ranger
Very well built, heavy duty, high quali ty.
by: 02/19/2024
by: Paul 01/07/2024
25
33
Show More Reviews
See what our Experts say about this Erickson Ladder Racks
- Design of Erickson Over-The-Cab Truck Bed Ladder RackI verified with Erickson that the design of the ladder rack # EM07707 has never changed from the original. The picture and video I've linked shows the actual design.
view full answer...
- Is The Erickson Over-The-Cab Truck Bed Ladder Rack Comaptible With Truck Bed Caps The Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 clamps to the inner lip of the bedrails so it would not be compatible with a tonneau cover or truck bed cap. If you have a camper shell style truck bed cap then you could install roof rack mount like the Rhino-Rack Heavy-Duty Roof Rack for Camper Shells # Y01-140B. This rack has tracks that will require drilling into the cap but once complete will allow you to slide the towers in the tracks to fit multiple accessories. If you...
view full answer... - Over the Cab Style of Ladder Rack Recommendation for 2009 Nissan Frontier With Utili TrackI have a very similar ladder rack that does fit your 2009 Nissan Frontier crew cab with the utili track but the MaxxTow MT70232 that you referenced does not fit with the utili track. Instead you'd want the Erickson Over the Cab Ladder Rack part # EM07707 which is a confirmed fit and gives you the same style of ladder rack.
view full answer... - Tonneau Cover And Ladder Rack For A 2021 Toyota Tundra 5 Foot Bed Without Deck RailsThe BAK Revolver X2 Hard Tonneau Cover # BAK39409 is confirmed to fit your 2021 Toyota Tundra. The T-Rac Pro 2 Ladder Rack # TH37002XT will not work with The BAK Revolver. The Adarac Pro Series Custom Truck Bed Ladder Rack will work with The BAK Revolver tonneau cover but it only has a 500 pound capacity. The rack is made out of a lightweight aluminum which is rustproof. It has an easy, no drill installation that comes with included hardware. The Adarac Truck Bed Ladder Racks are the...
view full answer... - Option for 2015 Nissan Frontier for Ladder Rack/Roof RackWhile we don't offer single upright ladder racks we do have ladder racks that fit your 2015 Nissan Frontier like the Erickson part # EM07707 which basically gives you a ladder rack for the truck bed with an over the cab extension that extends forward of the cab to create basically a roof rack for the truck as well.
view full answer... - Compatibility of Pickup Truck Ladder Racks with Tonneau CoversTonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the TracRac SR sliding ladder racks like # TH43002XT-501 mount on top of the bed rails so they will work with tonneau covers like Tonno Pro soft roll-up cover # TPLR-3080 which installs inside the bed rails. Please feel free to email me back with...
view full answer... - Will the Erickson Over the Cab Truck Bed Ladder Rack part # EM07707 Fit a 2010 Ford F-150The width of the Erickson Over the Cab Truck Bed Ladder Rack part # EM07707 that you referenced is adjustable. We checked with Erickson and this rack is a fit for your 2010 Ford F-150.
view full answer... - Recommended Ladder Rack Options For A 1996 Toyota Tacoma Hauling Kayaks And CanoesSince there isn't a compatible roof rack fit available for your 1996 Toyota Tacoma the only way to get a mounting point above the cab would be to use a cabover ladder rack like the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707. These racks are bit noisy on the road and don't offer much adjustability so there is also the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever # TH43001XT-600EX. This rack sits on a base that will allow you to move the towers around to fit different...
view full answer... - Compatibility of the Erickson Over-The-Cab Ladder Rack on a 2016 GMC Sierra 1500The Erickson Over-The-Cab Ladder Rack, # EM07707, will fit the 5-1/2, 6-1/2, and 8 foot beds of the 2016 GMC Sierra 1500 truck. The ladder rack uses a non-drill clamping system to connect to the bed of your GMC, making for fast and easy installation. With its sturdy steel construction, the Erickson ladder rack has a maximum weight capacity of 800 lbs and this ladder rack is compatible with bed liners and some toolboxes.
view full answer... - Ladder Rack Recommendation for 2006 Chevy Silverado 3500 Long Bed If it were me I would go with the Erickson over the cab ladder rack part # EM07707 for your 2006 Chevy Silverado 35000 long bed. This gives you a nicer ladder rack that would do a great job carrying pipes/ladders that isn't super expensive. It also has multiple tie down points and does not require drilling to install.
view full answer... - Will a Toolbox Work with a Ladder Rack on a 2010 Ford F-150The Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707 is designed to work with chest style toolboxes such as the DeeZee Red Label Truck Bed Toolbox part # DZ8546B. In order to use this ladder rack with a crossover style toolbox like the DeeZee Specialty Series Truck Bed Toolbox part # DZ6170NB the toolbox will need to be moved toward the tailgate about 12-16" to allow for the ladder racks mounting feet to mount.
view full answer...
- Recommended Roof Rack and Cargo Basket for a 2002 Toyota TundraTo add a roof rack to your 2002 Toyota Tundra's Naked Roof you will need the following parts: Inno Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # INXB138-2 Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 item # INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet item # INK153 This roof rack is confirmed to fit the Access Cab model of your Tundra. It has a 140 lbs weight capacity which is the highest available option for your truck. The...
view full answer... - Recommended Ladder Rack For A 2019 Chevy Colorado With A Lomax Tonneau Cover When it comes to ladder rack and tonneau cover compatibility it typically comes down to how the ladder rack mounts to the bedrails of the truck. In most cases if the ladder rack mounts to the lip of the bedrails it will prevent any tonneau covers from being able to be mounted. Typically this limits you to very few options, especially if you're not wanting to break the bank. The Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 is going to block any tonneau cover from mounting so you...
view full answer... - Will the Erickson Over the Cab Ladder Rack Fit My 2008 Dodge Ram 1500?Yes, the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 will fit your 2008 Dodge Ram 1500 5.7 Hemi (both the 6-1/2ft and the 8-foot bed). It is important to note that the hardware to install the bed rail clamps to the bed are not included with this kit. For tie-down straps for for the ladder rack, I recommend the Erickson Cam Buckle Tie-Down Straps w/ S-Hooks - 1" x 5-1/2' - 300 lbs - Qty 4 # 05605.
view full answer... - Can a Bed Slide be Driven in Extended Position to Haul Cargo?We can offer you a solution to haul lengthy cargo, but the CargoGlide is designed to give you easier access to your cargo and should not be in the extended position while traveling. The reason for this is because when driving, additional force would be added to the sliding bed that wouldn't be present when you are parked, which it is not designed to support. If you are looking to transport something like 14 ft. 2x4's, I recommend the Erickson Over-The-Cab Truck Bed Ladder Rack, # EM07707....
view full answer... - Does Erickson Over the Cab Ladder Rack Fit 2022 Ram 2500 Long Bed Crew CabHey James, yes the Erickson Over the Cab Ladder Rack part # EM07707 that you referenced is a confirmed fit for your 2022 Ram 2500 long bed crew cab.
view full answer... - Recommended Truck Bed Ladder Rack for a 2013 Ford LGT CONVTNL F-150I do have ladder rack options for your 2013 Ford LGT CONVTNL (F-150) but none of them will reach all the way to the nose of the truck. Instead, we have what are known as "over-the-cab" ladder racks which as the name states, extends over the cab of the vehicle. For this, I recommend using the Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707. This rack will fit F-150's with the 5-1/2', 6-1/2', and 8' beds. It has a 800 lb weight capacity, aerodynamic design to reduce drag, and...
view full answer... - Tonneau Cover And Ladder Rack Combinations For A 2018 Toyota TundraThere's really only two styles that will fit together when trying to use both a tonneau cover and a ladder rack at the same time. The first style being a ladder rack that mounts in the stake pockets of the vehicle and then a tonneau cover that sits inside of the bedrails. The most popular combinations of this are a ladder rack like the Thule TracRac SR # TH43002XT-610 or Adarac Pro Series # A27VR along with a cover like the BAK Revolver X4s # BAK53ZR. There's a bit of rubbing between...
view full answer... - Recommendation for Transporting Hobie Island Tandem Kayak on 2017 Ram 1500I may have a solution for you, however looking at the size and specs for your Hobie Island Tandem Kayak, I'm not sure that a standard roof rack and carrier like the Rhino-Rack Nautic # RR570 you referenced is your best solution. The weight of the kayak, which I found to be around 240 pounds, might exceed the capacity of your Ram's roof. You might also have a hard time safely securing its large size to standard cradles like these. To transport the kayak, a better option might be with a...
view full answer... - Ladder Rack Fits for 2008 Nissan Frontier Crew Cab 5-foot Bed and Utili-Track System We have several choices in a ladder rack for your 2008 Nissan Frontier Crew Cab with 5-foot bed and the Utili-Track system and these include racks from Erickson. You can see all of these on the linked page. The particular rack model # EM07706 that you referenced does not fit your model year truck but you can use Erickson aluminum rack # EM07705 (shown in the linked video) or their black rack with cab extension # EM07707. Both of these are rated for 800-lbs. If you want the highest weight...
view full answer... - Will the Erickson Over-The-Cab Truck Bed Ladder Rack Fit a 2023 Ram 2500 Long BedThe Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 does not have a difference in bed styles since it will work with both the 6 1/2' and 8' bed models of the 2023 Ram 2500.
view full answer... - Will TracRac Universal Steel Rac Ladder Rack w/ Extension Fit My 2012 Nissan Frontier With 5 Ft BedThe TracRac Universal Steel Rac Truck Bed Ladder Rack with Over-the-Cab Extension, # TH91000, is an adjustable unit to fit most vehicles. Universal means that it will fit many vehicles, not that it will fit every vehicle. For your 2012 Nissan Frontier Crew Cab with 5 Foot Bed with Utili-Track system, I contacted the manufacturer because it was not a confirmed fit on our end or on the manufacturer's website. They told me it will fit if you remove the Utili-Track System, but it will not...
view full answer... - Recommended Over The Cab Ladder Rack For A 2012 Nissan Frontier Extended Cab With A 6' BedThe Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 is a confirmed fit for a 2012 Nissan Frontier King Cab 6' bed with or without Utili-Track System. This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. The side rails provide extra load support and multiple tie-down points with an easy, clamp-on installation. If you have the Crew Cab with a 6' bed then I recommend the Thule TracRac SR Sliding Truck Bed Ladder...
view full answer... - Will the Erickson Ladder Rack Part # EM07707 Fit a 2017 Nissan Frontier Crew Cab 5 Foot BedI can confirm that the Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707 will work with your 2017 Nissan Frontier crew cab that has a 5' bed. This rack is fairly easy to install. It has a 800 lb weight capacity and works with most bed liners and toolboxes. I have attached a review video of this rack installed on a similar type of vehicle for you as well.
view full answer...
Do you have a question about this Ladder Rack?
Used Items Available
Condition: Surface Scratches
Notes: Item has minor cosmetic paint damage and scuffs. Otherwise new and unused.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Alex H
Test Fit:
Jared G
Test Fit:
David F
Written by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chris
8/9/2023
Great! I mostly use it for kayaks now that Ive retired. The only downside ive noticed is the noise from the turbulence when the rack isnt loaded.