Toolbox Mount Kit for Thule TracRac TracONE Truck Bed Ladder Racks

Ask the Experts about this Thule Accessories and Parts
Do you have a question about this Accessories and Part?

• Will the Toolbox Mount Kit Part # TH41000 Work with a T-Rac Pro2 Truck Bed Ladder Rack
  
• Yes, the Toolbox Mount Kit for Thule TracRac TracONE Truck Bed Ladder Racks part # TH41000 will work with a T-Rac Pro2 Truck Bed Ladder Rack part # TH37002XT-EX which is a confirmed fit for your 2017 Chevrolet Colorado. I spoke to my contact at Thule to confirm this. However, if you are purchasing the T-Rac Pro2 Truck Bed Ladder Rack new then you will not need the toolbox mounting kit as it is included with the rack.
  view full answer...


• Parts Needed to Replace Half of Thule TracRac TracONE Ladder Rack # TH27000XT-EX
  
• I'm sorry to hear about your stolen rack! While half of the Thule TracRac TracONE Ladder Rack # TH27000XT-EX is not available as a kit, we do have the necessary parts that will let you rebuild what is missing from your rack. I will list all the needed parts below: Toolbox Mount Kit # TH41000 Replacement Crossbar # 8542526002 Modular Upright # 8523446001 Modular Saddle # TA8523444001 Modular Base (Left Front/Right Rear) # TAPT-27001 Modular Base (Right Front/Left Rear) # 8528383001 Modular...
  view full answer...


• Ladder Rack and Deep Toolbox Compatible with 2005 Chevy Silverado Z71 Extended Cab
  
• For your 2005 Silverado Extended Cab I recommend using the Thule TracRac TracONE Truck Bed Ladder Rack - Fixed Mount - 800 lbs - Silver # TH27000XT along with the Toolbox Mount Kit for Thule TracRac TracONE Truck Bed Ladder Racks # TH41000. If you want the over the cab cantilever then I instead recommend the Thule T-Rac Pro2 Truck Bed Ladder Rack w/ Cantilever # TH37002XT-EX which comes with the toolbox mount brackets. Then you can use the DeeZee Blue Label Truck Bed Toolbox - Crossover...
  view full answer...


• Is the Erickson Truck Bed Ladder Rack Compatible with Crossover Toolbox on a 2019 Chevy Colorado
  
• You could potentially mount the Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 with the Lowe's toolbox that you referenced but unless you moved the forward-most uprights behind the toolbox it would be sitting just on the U-Bolts so you'd have to drill holes in it. I recommend using the Thule TracRac TracONE which comes in Silver # TH27000XT and Matte Black # TH27000XTB with the Toolbox Mount Kit # TH41000 to mount this toolbox on your Colorado instead as this is designed for...
  view full answer...


• Recommended TracRac TracOne Ladder Rack Tool Box Mounts for 2018 Ford F-150
  
• For your 2018 Ford F-150 the TracOne ladder rack will use the Toolbox Mount Kit for Thule TracRac TracONE Truck Bed Ladder Racks # TH41000 to give you the compatibility you are seeking by providing threaded holes for your toolbox instead of using J hooks. I've attached our article on this fit and have also attached a photo to assist.
  view full answer...


• Recommended Bike Rack and Ladder Rack or Roof Rack for Fishing Kayaks on 2002 Chevy 2500 6.5 Bed
  
• The Thule Low-Rider Bike Rack - Fork Mount - Bolt On # TH821XTR can mount to your Weather Guard toolbox. I recommend using the sealant # LT37467 to make sure your toolbox remains water tight at the mounting holes. For your roof rack I recommend the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 # RRVA165B-2, the 2500 Series Legs # RRRLKVA, and the Fit Kit # DK227. These bars will be longer than usual which you will need for two fishing kayaks. Then for your...
  view full answer...


• Compatibility of TracRac TracONE Ladder Rack System with Bed Mounted Toolbox on 2005 Ford F150
  
• According to my TracRac representative, the clamps that hold the front crossbar of the rack to the top of the bed side rail will extend into the interior of the bed by 1-1/4 inches per side, for a total of about 2-1/2 inches. If the width of the portion of your truck box that fits in between (not on top of) your bed rails is no wider than 2-1/2 inches less than the width between the tops of your bed rails, your toolbox should fit just fine. If the fit is tighter, there might be a problem. TracRac...
  view full answer...


• Will MaxxTow Truck Bed Ladder Rack Work with Toolbox on a 2019 Chevy Colorado
  
• I'm sure you could find a way to mount a toolbox on the MaxxTow Truck Bed Ladder Rack # MT70423 for your 2019 Chevrolet Colorado but this rack isn't designed for that. For a ladder rack that does have a toolbox mounting option you'd instead need the Thule TracRac TracONE which comes in Silver # TH27000XT and Matte Black # TH27000XTB. Then all you need is the Toolbox Mount Kit # TH41000 and you can mount your crossover toolbox! The biggest advantage of using the Thule system over the...
  view full answer...


• Compatibility of TracRac TracONE Ladder Rack with 2014 Chevy Silverado 1500
  
• The # TH27000XT-EX TracRac TracONE Ladder Rack you mentioned is a fit for your 2014 Silverado 1500. The ladder rack fastens to the top of the bed side using clamps, no drilling is required. If you want to mount a toolbox in the truck bed while using the TracONE, a mount kit # TH41000 is also available. I've linked you to an install video that you might find helpful.
  view full answer...


• Compatibility of TracRac Truck Ladder Racks and Crossover Toolboxes on 2015 GMC Sierra
  
• The TracRac TracONE truck ladder rack system can be used with a crossover tool box by using their Toolbox Mount Kit # TH41000. The kit works with the ladder-rack base and mounting clamps that are included with your TracONE rack and lets you mount your toolbox without having to drill into your truck's bed rails, just the tool box. If you have the TracRac G2 Sliding Ladder Rack then instead you'll use kit # TH25200. These items are not specific to any particular tool box. Links are...
  view full answer...


• Compatibility of Toolbox and Ladder TracRac with 2001 Tundra Extra Cab Pickup
  
• Toolbox Mounting Kit, # TH41000, was designed to be used with the TracONE ladder rack system and includes the shims and hardware to mount any crossover toolbox that will fit your truck. The pre-drilled holes in the brackets provide the attachment points needed to secure the box without having to drill into your truck's bed rails. I have attached the installation instructions for this kit as well. We do not have a video at present, but check back with us as we are always adding new videos.
  view full answer...

Do you have a question about this Accessories and Part?