Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2008 Peterbilt 338
We'll connect you with nearby partnered installers who know this exact setup.
Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Silver - 500 lbs
Part Number: A4002965
In Stock
$699.45
Retail:$770.00
You Save: $70.55
2008 Peterbilt 338
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
Adarac Ladder Racks - A4002965
Highlights
- Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
- Handles Heavy Loads: 500-lb capacity (250 lb per bar) carries ladders, lumber, or kayaks.
- Tonneau Cover Friendly: Works with most inside-the-rail covers for full bed access.
- Quick No-Drill Install: Mounts in stake pockets with foam-padded, aluminum rails.
- Adaptable Cargo Setup: Uprights slide or remove to fit different gear sizes.
- Built to Last: Rustproof, anodized aluminum resists corrosion and stays lightweight.
Features to know about
Secure Heavy Loads Without Sacrificing Bed Access: 500 lbs Capacity
The Adarac Pro Series Custom Truck Bed Ladder Rack lets you haul up to 500 lbs (250 lbs per bar), keeping long items like ladders, lumber, or kayaks steady and out of the way. Because it mounts in the stake pockets, your bed stays open and fully usable. The uprights stand straight up instead of leaning in, which leaves room for folding or retractable tonneau covers to open and close as usual.
Keep Your Tonneau Cover and Add Versatility: Stake-Pocket Mount Design
This rack works with most inside-the-rail tonneau covers, including Lomax hard tri-fold and Access roll-up covers. The stake-pocket mounting system means it doesn’t interfere with the cover rails or sealing surfaces, so you can keep your bed weather-tight while gaining overhead carrying space. That makes it ideal for setups where you want covered storage below and gear up top.
Organize and Secure Cargo: Utility Rails and Slotted Crossbars
Square aluminum crossbars feature integrated mounting channels along both the top and bottom for attaching accessories or tie-downs. The removable rubber strip on top adds grip and cuts vibration, and you can pull it out when you want to use the channel. Utility rails along the bed sides include their own channels so you can mount tie-downs or add-on gear as needed. Four sliding load stops are included to help keep lumber, pipes, or boards from shifting, and each one supports up to 100 lbs.
Rustproof Strength That Lasts: Anodized Aluminum Construction
Built from extruded aluminum with an anodized silver finish, this rack is lightweight, rustproof, and corrosion resistant. The foam-padded utility rails protect your bed rails during installation, while the angled uprights and crossbars keep a clear rear view. The streamlined shape stays quiet and looks clean whether you’re using it for work or weekend trips.
Simple Setup and Removal: No-Drill Installation
Everything mounts with the included aluminum stake pocket inserts—no drilling required. Hardware and channel nuts let the uprights slide or come off when you need full bed clearance. Once installed, you can raise your hauling game in about an hour without altering your truck bed. Crossbars measure 72" long x 1-1/2" wide, and the rack carries a limited 1-year warranty.
Specs
Weight and Capacity
- Carrying capacity: 500 lbs (250 lbs per bar)
- Load stop maximum capacity: 100 lbs per load stop
Dimensions
- Crossbar dimensions: 72" long x 1-1/2" wide
Warranty
- Limited warranty: 1-year
F2020091 ACI Adarac Pro Series Custom Truck Bed Rack - Aluminum - 500 lbs
Replaces Adarac 4002965
This Product Fits The Following Vehicles
- 2019 - 2026 GMC Sierra 1500 5-3/4 Foot Bed
- 2022 - 2022 GMC Sierra 1500 Limited 5-3/4 Foot Bed
- 2024 - 2027 GMC Sierra EV
- 2019 - 2026 Chevrolet Silverado 1500 5-3/4 Foot Bed
- 2022 - 2022 Chevrolet Silverado 1500 LTD 5-3/4 Foot Bed
- 2024 - 2027 Chevrolet Silverado EV
Ratings & Reviews
4.7
55 reviews
by:
Oleg
10/14/2022
I have had this rack for one year. So far, so good. It looks great, way better than other models I see around. Do not rust; sturdy enough. Works well with trunk cover. Installation is a bit tricky, but any handyman can do it alone in a couple of hours. Good purchase overall
by:
Chris
07/21/2022
Chevrolet
Silverado
Hard to find a rack that fit with the stock hard trifold tonneau cover on my 2021 Silverado 1500. This rack was easy to install, fit perfect and does not interfere with the tonneau cover
by:
Patrick
11/01/2025
2022
Ford
F-150
Overall good product, works with my trifold tonneau cover, I do wish it had some sort of cover for the stake pocket where the upright bolts in. I wish I came with additional channel nuts as well for bolting onto the crossbars
by:
Marc
05/10/2024
2023
Ford
F-150
I have had the rack installed for about six weeks. After a few trips on everything from highways to gravel and dirt roads it has been very solid. We have a fly fishing rod case mounted on it and it's solid. I think there is a little wind noise but not much. Easy to install, lots of good paper instructions as well as videos on line. Next trip will have our canoe mounted on top.
by:
Rob
07/01/2025
2022
Jeep
Gladiator
I bought this rack believing installation did not require drilling. That may be true for installation on many vehicles, but does require drilling to install on a Jeep Gladiator. Special instructions that come with the rack are quite clear on this for both a Jeep Gladiator and a Toyota Tacoma up to 2023.
A 2nd issue came up while following the instructions. They call for torquing the self threading bold to 85 in/lbs. When I hit 60 in/lbs, the self threading bolts started stripping out the holes. I fixed this using 6 nuts to hold the self threading bolts from underneath. Tight clearances made this a tougher job than it should have been.
To anticipate questions, yes I was using a torque wrench calibrated in inch pounds and not foot pounds. Yes I used the proper drill size and did not wobble the holes larger. I believe that at least for Jeep Gladiator, the kit should include nuts for the hold down bolts. Can't comment on the Toyota Tacoma - but be prepared.
I will say that once installed, the rack looks to be a quality item and I am otherwise satisfied with it. If not for the unexpected installation hassles, I would rate the rack as 5 stars.
A 2nd issue came up while following the instructions. They call for torquing the self threading bold to 85 in/lbs. When I hit 60 in/lbs, the self threading bolts started stripping out the holes. I fixed this using 6 nuts to hold the self threading bolts from underneath. Tight clearances made this a tougher job than it should have been.
To anticipate questions, yes I was using a torque wrench calibrated in inch pounds and not foot pounds. Yes I used the proper drill size and did not wobble the holes larger. I believe that at least for Jeep Gladiator, the kit should include nuts for the hold down bolts. Can't comment on the Toyota Tacoma - but be prepared.
I will say that once installed, the rack looks to be a quality item and I am otherwise satisfied with it. If not for the unexpected installation hassles, I would rate the rack as 5 stars.
by:
Michael
09/25/2026
Adarac pro was as advertised and assembly went well. Looks good on the truck. Delivery was ahead of schedule.
Always good doing business with etrailer
Always good doing business with etrailer
by:
Gary
04/20/2022
I had delayed trying to get ladder racks because I wasn't sure whether it would work with my bed cover. I was able to locate the correct model online and verify my findings and order on the phone Rodney was helpful and friendly.
Gary W.
4/21/2023
Great. The rack looks good and is very stable
by:
Ken
08/24/2020
2020
Ford
F-150
Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.
Kenneth S.
8/20/2021
It works great with my bakflip hard cover
by:
Tran
06/22/2021
I love my Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Matte Black - 500 lbs. I found it easy to install by myself—including cutting the deck plastic trim to expose my stake covers. Its black finish complements my truck. Best of all, it enables my BAK Industries tonneau cover, Revolver X2, to maintain is full functionality. My only recommendation would be to include more foam strips. They are intended to fill the gaps between the end of the grooves on the plastic trim to the end of the rail. There was enough for one strip of foam on each end rather than two (one on each side of the rail) on each end of the rails.
by:
Russell
08/27/2026
Looks like the rack will work out good for hauling canoes and kayaks and such. Appears well made, and installed pretty easily.
by:
Richard
04/13/2021
2020
Jeep
Gladiator
Took a couple of hours to install. One on the few you can use with hard tri-fold bed cover. Going to add side bars for off-road tools.
by:
Matt
06/18/2025
2025
Ford
Ranger
After 90 minute install, it feels sturdy and looks great. Ford ranger 2025, no cutting or drilling required. I like the fact that it has some rubber strips on top, should work well for carrying a kayak. Will need to unscrew antenna if carrying something in middle over roof.
Gwendolyn Y.
6/20/2025
Happy to hear that you love the rack, Matt! When do you get to use it to carry your kayaks to the water?
by:
Donald P.
11/24/2025
Package arrived on time I have been out of town for a few weeks so just put it together today
It fit perfectly I think it looks good will mount kayaks on it and see if it works
I am well pleased so far
It fit perfectly I think it looks good will mount kayaks on it and see if it works
I am well pleased so far
by:
Jose A
03/10/2025
2022
Jeep
Gladiator
Clean, sleek look. Easy to install!
Gwendolyn Y.
3/11/2025
Looks great on your Gladiator, Jose! What are you going to put on the rack?
by:
Mark
06/25/2025
The ladder rack is great. Fits over my tonneau cover. And carries everything I put up there.
by:
Sergio
09/07/2022
I really like the aesthetics of the ladder rack and functionality. Its sturdy, durable and looks slick !
by:
John t
04/14/2019
Works great with the backflip hard cover.
Should have some predrilled hole to attach tie down straps.
Should have some predrilled hole to attach tie down straps.
Jack T.
4/15/2020
Great
by:
Lawrence
07/16/2021
Ford
F-150
I bought this ladder rack because I needed something that would attach to the stake pockets of my f-150 because I have a bed cover. Everything else I found had to hook around the side of the truck bed. Installation was easy. The only issue I had was the forward stake holes didn't have a removable cover. I had to cut a hole in each side.I use them to carry my kayaks when I go camping. They work great for that and carrying anything that won't fit in the bed.
by:
William
04/21/2023
Love this ladder rack...it works great with my tauneau cover, Iuse it to transport our Kayaks when we go camping and it is great to still be able to use my bed with the tauneau cover on to protect our gear in inclimate weather. I would absolutely buy it again. Thanks.
by:
Myron
02/12/2021
This rack is very solid and travels well.
I have had no problems but I should say I have used it lightly.
I have had no problems but I should say I have used it lightly.
Myron
2/13/2022
I have traveled with kayaks at highway speeds from Wisconsin to Texasthree times with two kayaks and have no problems.
by:
Paul
01/12/2021
2020
Chevrolet
Silverado 2500
Box came open at one end and slightly open at the other. I was nervous thinking that the hardware bag and two additional accessories that I ordered might be missing. Upon opening the box everything was there and well packaged. The only issue I had was one of the vertical supports that has two laser cut holes didn't have one of the holes completely cut. 3/4 of the cut was made. I punched a starter hole in the center and drilled it out and finished the install. Overall great rack for carting around the canoe or lumber longer than the pickup bed. One other thing. They need to debur the edges of the aluminum pieces otherwise they are very sharp.
by:
Aaron
09/07/2022
I think it's a great ladder rack for step ladders and shorter extension ladders. I qwould support anything longer than a 16 footer. It was easy to put together and works really well for what I need and with my tonneau coover
25
55
true
Show More Reviews
See what our Experts say about this Adarac Ladder Racks
- Ladder Rack Compatibility with Extang EnCore Tonneau Cover on 2020 Chevy 1500 5-3/4 Foot BedFor your 2020 Chevy 1500 5-3/4 bed, the Access Lorado Soft, Roll-Up Tonneau Cover # A93FR is compatible with the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4002965. The Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-782 can also work, but you will need to slide the rack to fold the tonneau as the rack supports are angled in.
view full answer... - Ladder Rack that Can Fit 2020 GMC Sierra 1500 5.5 ft Bed with GM Tonneau 84786355 This would not fit with the GM tonneau you have. This wraps around the bed rails which your tonneau would prevent from installing. Does your tonneau cover the bed rails? I wasn't able to fully verify what type of tonneau you have as we may have an option if the stake pockets are open.
view full answer... - Will the Thule XSporter # TH54RR Fit with My BAKFlip MX4 on My 2020 GMC Sierra 1500?I have a solution for you. When considering a ladder rack for your 2020 GMC Sierra 1500, it is important to determine if your truck's stake pockets are open and accessible. If you have a BAKFlip MX4 installed on your vehicle, the stake pockets on your truck are available to accommodate a ladder rack. However, since the Thule Xsporter Pro Shift # TH54RR clamps onto your truck's bed rails, it will interfere with the BAKFlip MX4. For a great alternative that is compatible with your tonneau...
view full answer... - 2021 GMC Sierra CarbonPro Bed Ladder Rack CompatiblityI have listed three racks that will all work with your 2021 Sierra Short Box Crew with the CarbonPro Bed. They will also offer drill free installation. My recommendation is Thule TracRac SR Sliding Truck Bed Ladder Rack, part # TH43002XT-782, is a great option. It has a weight limit of 1250lbs. The tracks for this rack attach in your bed's stake pockets. But my favorite feature of this rack is that rack slides. So if you need to use the bed of your truck you can slide the rack all the...
view full answer... - Recommended Ladder Rack that is Compatible w/ a Gator Tonneau Cover on a 2022 Chevy Silverado 1500Yes, we do have a ladder rack that will work with your Gator FX3 tonneau cover. The Adarac Pro Series Ladder Rack item # A4002965 (silver) or item # A76WG (Black) is confirmed to fit your 2022 Chevy Silverado 1500 with a 5-1/2 foot bed. This lightweight aluminum system has a 500 lbs capacity. This rack uses the stake pockets for mounting and will be the widest mount with straight upright bars to give you the best access to the tonneau rail to secure your cover. The ladder rack uprights...
view full answer... - Which Kayak Carriers Can Be Mounted on an Adarac Pro Series Ladder RackWe have just what you're looking for. You can use the etrailer J-Style Kayak Carrier - Folding - Universal Mount # e98878 on the Adarac Pro Series ladder rack similar to the # A4002965 that fits on the 2020 GMC Sierra 1500 with a 5-3/4 foot bed. These will clamp onto the bars and comes with tie down straps included to secure the boats to the carrier. I've linked a review video of this carrier for you to check out.
view full answer... - What Ladder Rack Do You Recommend for a BAKFlip MX4 on My 2021 Chevy Silverado 1500 58 Bed?For a great ladder rack that fits with your BAKFlip MX4 on your 2021 Silverado 1500 with a 5'8" bed, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack # A4002965. Since the BAKFlip MX4 completely installs within the bed rails of your truck, the Adarac Pro Series will be able to install into the stake pockets of your vehicle without interfering the tonneau. The Adarac comes with a 500 pound weight capacity for carrying ladders, lumber, piping, and and other cargo with ease....
view full answer... - Recommended Ladder Rack for 2021 Chevy Silverado 1500 with LockNRoll CoverThe Adarac Pro Series Custom Truck Bed Ladder Rack will still work with some overlap on the stake pockets. It doesn't take up the entire pocket and it can sit on the side of the rail slightly, I have not heard of any issues with slight interference. Since you have a retraceable bed cover you can use any of the Adarac options. The Adarac Pro Series Custom Truck Bed Ladder Rack part # A4002965 for example has the vertical uprights and fits the 5-3/4" bed. If you can let me know the style...
view full answer...
- Ladder Rack That Fits 2020 Chevy Silverado 1500 with 5-3/4 foot BedFor a fixed ladder rack that fits your 2020 Chevy Silverado 1500 5-3/4 foot bed we have the Adarac Pro Series Ladder Rack part # A4002965 which will work great and is perfectly compatible with your tonneau cover as well. If you wanted a sliding ladder rack that allows you to position the uprights where it makes the most sense you'd want the part # TH43002XT-782.
view full answer... - What Tonneau Cover and Ladder Rack do You Recommend for My 2021 Chevy Silverado 1500? For an amazing tonneau cover/ladder rack combination on your 2021 Chevy Silverado 1500 (5-3/4 ft. bed crew cab), I recommend the BAK Revolver X2 Hard Tonneau Cover - Roll Up # BAK39130 along with the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A4002965. The reason why the Revolver X2 is a great cover for your Silverado 1500 is because it mounts completely in the bed rails and leaves the stake pockets open for compatibility with a stake-mounted ladder rack like the Adarac...
view full answer... - Will the TracRac SR Work with My BAKFlip MX4 on My 2021 Chevy Silverado?I have a great solution for you. The TracRac SR # TH43002XT-782 (for 5-3/4 ft. bed) and the # TH43002XT-781 (for 6-1/2 ft. bed) will work with your BAKFLip MX4 cover on your 2021 Chevrolet Silverado 1500. However, they do not make a TracRac SR that will fit your vehicle if you have an 8-foot bed. In order to maneuver your folding-style cover with the TracRac SR, you will need to move the base rails of the TracRac in order to accommodate the folding capability. The reason for this is because...
view full answer... - What No-Drill Ladder Rack Works with the BAKFlip MX4 # BAK448130 on My 2021 Silverado 1500 Short BedFor a great drill-free ladder rack that is compatible with the BAKFlip MX4 # BAK448130 on your 2021 Chevy Silverado 1500 with a 5-3/4 foot bed, I strongly recommend the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A4002965. Since the Adarac's base rails stand straight up without any inward angle, there is no need to worry about any rubbing/interference of the rack with the MX4 when opening/closing. Since the MX4 install on your truck completely inside the bed rails, it leaves...
view full answer... - Tonneau Cover Compatible Ladder Rack for 2020 GMC SierraI've looked at a photo of your Embark LS Tonneau cover, and from what I saw, it looks as if the side rails of the tonneau cover up about half of the top of the bed side, covering up at least half of the stake pocket holes. Because the tonneau compatible ladder racks we offer such as the Adarac or the Thule TracRac SR racks depend on the stake pockets as an attachment, it's likely that the two wouldn't be compatible. If the tonneau uses mounting rails that mount completely to the inside...
view full answer... - Compatibility of Adarac Pro Series Ladder Rack With OEM Tonneau Cover on 2021 Chevy Silverado 1500As long as the edge of your OEM tonneau cover does not extend over onto the top of the bed side rails, it will not interfere with the installation of the # A4002965 Adarac ladder rack.
view full answer... - Can Adarac Pro Series Ladder Rack Fit with Bak MX4 Tonneau of 2021 GMC Sierra 1500Yes the Adarac Pro Series Ladder Racks can fit with the Bak MX4 tonneau cover of your 2021 GMC Sierra 1500. Since I don't know your bed length you'd want the following combinations of the two based on bed length. 8 ft bed you'd want ladder rack part # A4003886 with tonneau # BAK448132 6-1/2 ft bed you'd want ladder rack # A4003497 with tonneau # BAK448131 5-3/4 ft bed you'd want ladder rack # A4002965 with tonneau # BAK52FR
view full answer... - Truck Rack Options For 2020 GMC 1500 Sierra SLT With Revolver X4 Tonneau CoverSince you have the BAK Revolver X4 Hard Tonneau Cover # BAK72VR you can use the Adarac Pro Series Custom Truck Bed Ladder Rack # A4002965 because the Revolver X4 does not use a lot of bed rail space and leaves the stake pockets open. That's where the Adarac Ladder Rack Installs, in the stake pockets. This version of the ladder rack has upright posts unlike the other rack that taper inward towards your truck bed. There are two colors for that style, the aluminum version # A4002966 and the...
view full answer... - Tonneau Cover and Ladder Rack Fits for 2020 GMC Sierra 1500 5-3/4 ft BedFor your 2020 GMC Sierra 1500 5-3/4 foot bed with a BakFlip tonneau # BAK34ZR the TracRac part # TH43002XT-782 would fit technically but wouldn't allow the cover to open. With this TracRac the only tonneau that will fit and roll up is the Revolver # BAK79130. With your Bakflip though you could use the Adarac Pro Series part # A4002965 as this would fit and still allow the cover to fold up.
view full answer... - Adarac Pro Series Aluminum Finish Truck Bed Ladder Rack For A 2021 Chevy Silverado 1500If you're saying that you have a 6'6" bed then the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A4003497 would be the correct fit for your 2021 Chevy Silverado 1500. If you have a 5-3/4' bed you would need part # A4002965 instead.
view full answer... - Will Adarac Ladder Rack from 2009 Chevy Silverado 1500 Work on 2019 GMC Sierra New Body 1500According to the folks at AGI, their Adarac from the 2009 GM truck won't be compatible with your 2019 model, not only because the stake pockets are different, but also because the dimensions of the bed changed. If you were wanting a new model, for the 5-1/2 foot long bed I'd recommend the Adarac Pro Series # A4002965 or for the 6 foot bed, use # A4003497
view full answer... - Recommended Ladder Rack for a 2019 GMC Sierra 1500 5-3/4 Foot Bed with Hard Fold Tonneau CoverIf you have a hard folding tonneau cover that does not cover the stake pocket holes like the BAKFlip MX4 Hard Tonneau Cover part # BAK448130 which is a fit for a 2019 GMC Sierra 1500 with 5-3/4' bed then you can use the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4002965. The Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A4002966 won't work as the uprights are angled therefore would hit the panels when folded back. The uprights on the Adarac Pro Series are straight...
view full answer... - Thule TracRac SR for 2019 Chevy Silverado Trail BossThe issue we're going to run into is that the BAKflip MX4 # BAK448130, is not a great fit for the Thule TracRac SR # TH43002XT-782 because the wide rails on the TracRac SR overlap with the seals on the MX4. In addition to this, you would need to move the rear rack forward in order to fold the cover up each time and with continuous use the seals on the cover will wear out. The only confirmed tonneau cover that will work with the Thule TracRac SR is the BAK Revolver X4s # BAK62VR, which...
view full answer... - Lock n Roll Tonneau Cover and Adarac Ladder Rack Compatibility For 2 Kayaks On A 2020 SilveradoThe Adarac Pro Series Ladder Rack # A4002965 has the rails sit over the stake pocket area of your 2020 Chevrolet Silverado's Bed Rails. Since the Lock N Roll Tonneau Cover doesn't cover up the stake pockets, it should fit on top of them. The rails will sit a little on top of your tonneau covers rails so it won't be completely flush but it will install. Now you can get two J-Style Kayak Carriers # e98878 so you can carry both of your kayaks. Our carrier is a very cost effective option,...
view full answer... - 2022 Chevy Silverado 1500 LTD Ladder Rack Recommendation to Fit with REV Folding Tonneau CoverFor your application I recommend going with an Adarac Pro Series ladder rack as the rails install on top of the bed sides and you're able to move them back and forth. The correct one depends on the bed size of your 2022 Chevy Silverado 1500 LTD: 5-3/4' Bed - # A4002965 6-1/2' Bed - # A4003497 8' Bed - # A4003886
view full answer... - Ladder Rack Options for 2019 Chevy Silevrado 1500 5-3/4 Bed with BAKFlip MX4 Hard Tonneau CoverIn order to use a ladder rack with the BAKFlip MX4 Hard Tonneau Cover part # BAK448130 for 5-3/4' beds you can use the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-782 or the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4002965. These options will both work well for utility use like ladders etc. and recreational use like kayaks etc. Unfortunately, there would be no way to use the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack.
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Tyler C
Video Edited:
Jacob T
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Mark S
Written by:
Ronnie R
Installed by:
Adam E
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Marc
5/11/2025
The rack works great. We’ve had the canoe on it. It’s solid. It has not needed any adjustments. The paint is holding up just fine. We’ve removed and reinstalled it twice with no problems. Very glad we got this one